Drill Bits for Concrete

The carbide tip at the tip contributes to high bite resistance and durability. Especially when drilling holes in concrete, it has a long life. Work Material: Concrete, Brick, Mixture, Natural Stone, etc.

Drilling gel can be used to drill holes in tiles and stone plates without water! Drilling gel can be used to drill holes in hard porcelain tiles. The side holes make it easy to remove cutting debris. Can be used with charging impact drivers and charging driver drills. The gel can be easily wiped ... Read More

Ideal for delicate drilling in difficult-to-cut materials such as glass and marble. The 4-flute, thinning process makes it easy to bite into the work material, and processing at a fixed position is smooth. Work Material: Glass, Tile, Marble, Concrete, etc.

The specially shaped X-shaped carbide tip makes it difficult to bite into the reinforcing bar. Both speed-up of drilling (10% up compared to the company) and long life (40% up compared to the same company) are achieved.

The polygon chisel has self-polishing properties, the cutting edge is always sharp, and high work efficiency is maintained. Increased chipping power: Innovative cross-sectional design increases chipping power by 30% (compared to the company). Since the chipping force is widely propagated, high wo... Read More

Due to the unique corrugated design and the new technology X polygon tube effect, chips are discharged from the hole at high speed, the bite of the chisel is reduced, and the work interruption time is shortened. Hilti's polygon chisels have self-polishing properties, do not require re-polishi... Read More

Performance is improved by adopting 3 blades. Improved anti-reinforcing performance. Penetrate the deck plate. Achieves drilling that is close to a perfect circle. Less outside diameter wear. Less impact due to drilling, less fatigue. For drilling holes in concrete, blocks, mortar, stone, deck pl... Read More

With a wide variety of sizes, we can meet a wide range of work environment needs. Uses a carbide tip that emphasizes durability, and achieves outstanding sharpness due to the uniquely designed cutting edge shape and angle. SKS material (alloy tool steel) with excellent wear resistance and impact ... Read More

By making the candle-shaped carbide tip and the cutting edge thinner, the work material is sharply drilled and the drilling speed is improved. The center point at the tip of the carbide tip demonstrates outstanding positioning performance, enabling drilling close to a perfect circle. The center p... Read More

Since it is a hexagonal shaft shank (6.35 mm), it can be used as a charging drill and workability is improved! Blocks, mortar, bricks, gypsum board, etc. * Do not use for anything other than its intended purpose.

SDS Plus Bit is manufactured and sold under a license agreement with Bosch (Germany). Improved rebar performance. Penetrate the deck plate. Achieves a hole close to a perfect circle. Improved positioning performance. Less outer diameter wear. Less impact due to drilling and less fatigue. For dril... Read More

Concrete drill compatible with rotary / vibration drills Concrete, blocks, mortar, bricks, gypsum board, etc. * Do not use for anything other than its intended purpose.

Uses a carbide tip suitable for hard stones, and has excellent machinability and durability. Other features are the same as the Delta Gonbit. Less impact due to drilling and less fatigue. For hard stones. For drilling holes in concrete, blocks, mortar, stone, deck plate + concrete, etc. * If you ... Read More

With a hexagonal shaft (6.35 mm) finish, it can be attached to an impact driver with a single touch and can be easily used as a concrete drill. Ideal for pilot holes for plug anchors and no-plug screws. The tip at the tip is polished to pursue even more sharpness. The hexagonal shaft and the dril... Read More

By making the cutting edge "4 edges", it is possible to drill a hole that is closer to a perfect circle than a general 2-edge drill, and anchor insertion can be done smoothly. By optimizing the cutting edge and spiral design, we have achieved an improvement in drilling speed compared to... Read More

For drilling blocks, mortar, ALC, bricks, and semi-porcelain tiles

* If you order by cash on delivery, it may be shipped the next day or later.

By making the candle-shaped carbide tip and the cutting edge thinner, the work material is sharply drilled and the drilling speed is improved. The center point at the tip of the carbide tip demonstrates outstanding positioning performance, enabling drilling close to a perfect circle. The center p... Read More

A bit dedicated to hammer drills that efficiently transmits the striking rotational force without loss. The integrated design from the chuck to the cutting edge demonstrates outstanding power for through-hole and deep-hole work. * Please use the stone for drilling holes in the stone.

Uses a carbide tip that emphasizes durability, and achieves outstanding sharpness due to the uniquely designed cutting edge shape and angle. B type for vibration

By using a candle-shaped carbide tip and a thin cutting edge, the work material can be drilled sharply and speedily. The center point at the tip demonstrates outstanding positioning performance. Due to the center point at the tip of the carbide tip, there is little runout during drilling, so dril... Read More

Drilling close to a perfect circle is possible, and anchor insertion is smooth. By adopting a cross blade for the cutting edge, it is possible to penetrate the deck plate. A cross blade that bites less even when it hits the reinforcing bar and wears less on the cutting edge and outer diameter mai... Read More

Stable drilling is possible with less catching and impact due to drilling. Less burden on the body even when used for a long time, reducing fatigue. Achieves a hole close to a perfect circle. Improved positioning performance. Improved safety when contacting reinforcing bars. (Reduces swinging by ... Read More

Workability and economy are greatly improved by the 3-flute. Outstanding durability (compared to the manufacturer) Drilling speed UP (compared to the manufacturer) You can make holes that are close to a perfect circle. Improved positioning performance. For drilling holes in concrete, blocks, mort... Read More

Rotation mode for both rotation and vibration: For drilling holes in mortar, ALC, Japanese walls, ceramic siding, pottery tiles, etc. Vibration mode: For drilling holes in concrete, blocks, bricks, mortar, etc. Application details Concrete drill (rotation mode) ◎ (Optimal)… Mortar, slate, ALC, Ja... Read More

With a wide variety of sizes, we can meet a wide range of work environment needs. Uses a carbide tip that emphasizes durability, and achieves outstanding sharpness due to the uniquely designed cutting edge shape and angle. SKS material (alloy tool steel) with excellent rigidity and impact resista... Read More

Excellent sharpness with a powerful tip!

By making the cutting edge "4 edges", it is possible to drill a hole that is closer to a perfect circle than a general 2-edge drill, and anchor insertion can be done smoothly. By optimizing the cutting edge and spiral design, we have achieved an improvement in drilling speed compared to... Read More

The hexagonal shaft (opposite side 6.35 mm) allows direct attachment to the charging impact driver. Because it is an integrated type, there is little fluctuation and it has excellent durability.

Drilling close to a perfect circle is possible. Improved positioning performance. The special shape firmly fixes the bit. For drilling holes in concrete, blocks, mortar, and ceramic siding. * Be sure to use the electric motor with a vibration drill in vibration mode. * Impact drills and drill dri... Read More

[SDS Plus Bit X5L] 5 blades make a perfect circle! Strong against reinforcing bars and long life! High quality drilling contributes to work quality and cost reduction. ● The world's first 5-flute, robust, integrally molded carbide head has achieved a near-round hole and a long life that is re... Read More

A bit dedicated to hammer drills that efficiently transmits the striking rotational force without loss. The integrated design from the chuck to the cutting edge demonstrates outstanding power for through-hole and deep-hole work.

Suitable for drilling holes in concrete, blocks, mortar, stone, deck plate + concrete, etc. Performance has been further improved by adopting 3 blades. Improved rebar performance and positioning performance. Penetrate the deck plate. Achieves a hole close to a perfect circle. Uses a three-threade... Read More

The torque transmission efficiency has been improved by adopting a 6.35mm hexagonal shaft shank. It is safe and secure with an integrated shape from the shank to the cutting edge. By supporting vibration drills, it is possible to drill concrete in vibration mode. (Impact driver not allowed) Work ... Read More

Performance is greatly improved by adopting 3 blades! Improved performance against reinforcing bars Achieves drilling close to a perfect circle through the deck plate Improved positioning performance Less impact due to wear and drilling on the outer diameter, and less fatigue For drilling holes i... Read More

For both rotation and vibration. For drilling holes in concrete, blocks, mortar, etc.

Performance is further improved by adopting 3 and 5 blades! Stable drilling is possible with less catching and impact due to drilling. Less burden on the body even when used for a long time, reducing fatigue. Achieves a hole close to a perfect circle. Improved positioning performance. Improved sa... Read More

By making the candle-shaped carbide tip and the cutting edge thinner, the work material is sharply drilled and the drilling speed is improved. The center point at the tip of the carbide tip demonstrates outstanding positioning performance, enabling drilling close to a perfect circle. The center p... Read More