All Category

Deburring Tool Handles

View : Grid List
Filter

16 Item(s)

Set Ascending Direction
  1. NG-1 Handle (Noga Grip 1)
    NOGA NG-1 Handle (Noga Grip 1)
    All S blades (3.2mm shaft) can be installed. It fits perfectly in the palm of your hand.
    Mass (g)  44  Trusco Part No.  304-3444  Suitable for  3.2mm axis compatible 
    from S$15.99
    Min. 2 days
  2. NG-3 handle (Noga Grip 3)
    NOGA NG-3 handle (Noga Grip 3)
    Holds all blade holders. Spare blades can be stored in the cap on the back side. It fits perfectly in the palm of your hand.
    Trusco Part No.  304-2898  Mass (g)  47 
    Rating:
    100%
    from S$15.99
    Min. 2 days
  3. Countersink Hand handle
    TRUSCO Countersink Hand handle
    The manual handle of the counter sink is used for large diameter counter sinks. chamfer. Deburring. Further counterbore.
    Overall Length (mm)  112 
    from S$21.99
    Min. 2 days
  4. Uni handle
    NOGA Uni handle
    A unique handle that can hold all round, hexagonal and triangular Noga blade holders. You can freely adjust the protrusion length of the holder. To lock the holder, turn the black sleeve counterclockwise and lightly tighten it. To remove the back cap, turn the cap slightly and pull.
    Mass (g)  50  Trusco Part No.  112-6814 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  5. Hexagon Aluminum Handle
    NOGA Hexagon Aluminum Handle
    Anodized aluminum handle makes it hard to scratch.
    Trusco Part No.  208-7839 
    Rating:
    100%
    from S$18.99
    Min. 2 days
  6. NB handle
    NOGA NB handle
    Unique handle that can hold all S blades and 3.2mm shaft blades. The handle part can be used to store the spare blade. The blade replacement button is designed so that it cannot be removed without raising the nail for safety. The back cap is also designed so that it will not come off during work.... Read More
    Rating:
    60%
    from S$15.99
    Min. 2 days
  7. NG-2 handle (Noga Grip 2)
    NOGA NG-2 handle (Noga Grip 2)
    Holds all N blades (2.6mm shaft). Spare blades can be stored in the cap on the back side. It fits perfectly in the palm of your hand.
    Trusco Part No.  304-3517  Applicable blade  2.6mm shaft N blade  Mass (g)  46 
    from S$15.99
    Min. 2 days
  8. handle
    SHAVIV handle
    Handle for directly mounting E group blades
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    20%
    from S$14.99
    Min. 5 days
  9. WM Manual countersink handle
    WATERMILLS WM Manual countersink handle
    * Some products have a red handle. Please note that you cannot select the color.
    from S$67.99
    Min. 2 days
  10. Mango II Extra Close
    SHAVIV Mango II Extra Close
    SHAVIV's representative handle that pursues the most popular, easy-to-use, and easy-to-grip Suitable for all B series blades
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$13.99
    Min. 2 days
  11. Mango II long reach handle
    SHAVIV Mango II long reach handle
    The most popular, easy-to-use and easy-to-grip handle that represents SHAVIV can be expanded and contracted with a single touch. Simple structure and sturdy. Ergo type Compatible with all telescopic holders and blades
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$13.99
    Min. 7 days
  12. YT handle
    NOGA YT handle
    Mass (g)  32  Trusco Part No.  353-4430 
    from S$13.99
    Min. 4 days
  13. Noga cut handle for ceramic
    NOGA Noga cut handle for ceramic
    Especially effective for hard plastics. Drill holes, press holes and straight parts can be deburred cleanly. For ceramic blades
    from S$33.99
    Min. 8 days
  14. Ceracut handle
    NOGA Ceracut handle
    Handle for Ceracut CR2000 / CR2300. A unique handle that automatically holds the ceramic blade with a taper inside the handle.
    Material  plastic  Overall Length (mm)  135  Trusco Part No.  798-2623 
    from S$18.99
    Min. 4 days
  15. Hand guard
    SHAVIV Hand guard
    Used in combination with the telescopic holder. It reduces the risk of injury by preventing hand-work contact.
    Trusco Part No.  195-4466  Mass (g)  72  Material  Stainless steel 
    from S$33.99
    Min. 3 days
  16. Ceramic Cutter
    NOGA Ceramic Cutter
    Rating:
    80%
    from S$76.99
    Min. 4 days
View : Grid List
Filter

16 Item(s)

Set Ascending Direction