Deburring Tools

Unique handle that can hold all S blades. The handle part can be used to store the spare blade. The blade replacement button is designed so that it cannot be removed without raising the nail for safety. The back cap is also designed so that it will not come off during work.

Chamfering and deburring can be done easily After making holes with a hole saw, various shapes such as chamfering, iron, stainless steel, copper, aluminum, plastic pipes (inner and outer surfaces), plates (side surfaces), drill holes, etc. Convenient for chamfering and deburring work in narrow sp... Read More

Since it uses a round blade, it has a long life if you use it while shifting the blade little by little, and you can use it twice as long if you use the other side as well. Comes with a hand guard to protect your hands. When chamfering the corners, use only one round blade.

All S blades (3.2mm shaft) can be installed. The housing that holds the blade is made of steel, so it can be used semi-permanently. To replace the blade, push on the sleeve of the housing and attach / detach the blade.

The most versatile and economical. All 3.2mm shaft S blades can be attached to the NB handle.

Suitable for heavy cutting work. You can deburr and chamfer straight lines and curves. The included S100 blade is ideal for deburring stainless steel and plastic.

A triangular scraper with a diameter of 3.2 mm (shaft diameter) x 75 mm (total length). Ideal for tool makers and mold makers.

Since 6 types of blades are set, it can be used for all purposes.

(Shaft diameter x total length) 3.2 mm x 51 mm triangular scraper. Ideal for tool makers and mold makers.

All N blades (2.6 mm shaft) can be installed. The thin handle makes it suitable for work in tight spaces. The blade can be easily replaced. A pocket grip is included as standard.

A tool that corrects rusted screws, clogged screws, etc. regardless of the diameter and pitch of the screws. Also suitable for cleaning screws of 9 mm or more.

The best tool for the back side of cross holes and drill holes.

Chamfering of the pipe is easy and easy. A grip that fits your hand. Lightweight and tough blade is easy to remove and replace. One spare blade is built into the main body. For chamfering stainless steel, iron, copper, aluminum, plastic, etc.

With sharp triangular blades on both sides, it can be used twice as much as usual. You can adjust the protrusion of the blade to any position.

For deburring both sides of a plate. Also suitable for soft materials such as plastic and aluminum. A double-sided deburring tool for sheet metal with a width of 1 to 8 mm.

Deburring ridges, inner walls of holes, and flat surfaces

A middle-sized scraper with a blade width of 4 mm. You can freely adjust the protrusion of the blade.

Suitable for deburring metal/plastic straight/curved parts and drilled holes. Most versatile and economical.

A disposable type scraper for fine work with an ultra-fine three-sided blade. Blade cannot be replaced Deburring of ridgeline, hole inner wall, inner circumference front side, inner circumference back side, flat surface

A pocket clip is included as standard. The blade cannot be replaced.

A tool that corrects rusted screws, clogged screws, etc. regardless of the diameter and pitch of the screws. Minimum screw diameter 9 mm. It can be used with both metric screws and inch screws (60 °, 55 °). Depth 20 mm. Also ideal for removing sealing tape.

Comes with a blade E100 that can chamfer and deburr straight / single-sided angles and inner / front-side corners of iron, aluminum, and plastic materials. It is a model that can be exchanged for blades (sold separately) of other E groups. Made of engineering plastic, it is light and durable. Sin... Read More

Efficiently removes burrs on inner and outer diameter keyways. The hexagonal blade holder is double-headed. It can be used for keyways with a width of 2.4 to 11 mm.

The 4-color handle can be replaced with a replacement blade for all S blades.

Deburring surface work

Efficiently removes burrs on the inner and outer diameter keyway widths. The applicable keyway width is 2.4 to 11 mm.

Suitable for deburring precision parts from normal deburring. S101 and S202 can be used for hole diameters of 2.5 mm or more. BK1010: For steel and aluminum BK2010: For castings and brass

It is designed to hold both N blades (2.6 mm shaft) for light cutting and S blades (3.2 mm shaft) for heavy cutting. The protrusion of the SN holder can be adjusted to 20 to 90 mm when using the N blade and 20 to 110 mm when using the S blade. The spare blade can be stored inside the handle.

Suitable for deburring cross holes. The D66 blade can be attached to the D holder with a 1.5 mm hex screw.

The most economical tool that can be used to deburr sheet metal with a width of 1 to 8 mm.

High-speed blade with a tip width of 2.5 mm

2.8mm wide high-speed blade

The nose is eliminated and the blade for precision work with an inner diameter of 2 mm or more cannot be replaced. For finishing work of mold and jig manufacturing

It's almost the same as the KW1000, but with an N90K blade. Suitable for deburring wide and deep or wide and shallow keyways. It can be used for keyway widths of 3 to 15 mm.