Countersinks

Longer life due to titanium coating. Beautiful surface finish without chattering. Smooth surface finish with a single blade.

Cobalt high-speed steel is used as the base material, and it has excellent wear resistance and heat resistance. By adopting a 3-flute shape for the cutting edge, chips can be discharged well and a beautiful finish can be obtained. Work material: Iron, casting, stainless steel. chamfer. Deburring.... Read More

It is a unique design that suppresses chattering and has excellent centripetal properties. It has excellent sharpness and excellent chip evacuation. Work Material: Steel, Alloy Steel, Casting, Stainless Steel, Copper Alloy, Aluminum Alloy. Chamfering, counterbore, deburring.

With a special insert and a unique body structure, it has excellent sharpness and does not chatter. By using special steel for the body, it has excellent wear resistance and durability. It has good bite and centripetal properties, and can be easily worked on a drilling machine. The insert is repl... Read More

High speed and high accuracy even though it is manual! It is possible to chamfer 12 edges of blocks of 50 x 50 x 20 size in about 30 seconds. It doesn't get scratched, it doesn't take up much space, the chamfered surface is shiny and quiet, and there is little scattering of chips. Chamfer... Read More

For "back" only! A special tool specializing in backside machining.

It can be used for various purposes such as chamfering, deburring, and widening holes. For iron, aluminum, brass, copper, wood, etc.

It can also be used for countersunk and pipe chamfering wood when tightening wood screws, light metals such as aluminum and copper, and mild steel materials that have not been hardened. * Please use the drill speed at 5000 rpm or less.

For chamfering and deburring after drilling holes in metal materials. Chamfering cutter for stainless steel!] Ideal for deburring and chamfering after drilling a metal material! Since it is a perforated type chamfering cutter, chips can be removed smoothly! The material is HSS-CO and highly durab... Read More

For processing soft and sticky materials

Ideal for chamfering and deburring countersunk screws. High durability with high-speed steel for deburring and chamfering after drilling

Cobalt high-speed steel is used as the base material, and it has excellent wear resistance and heat resistance. The surface hardness is high due to the surface titanium coating treatment, and heat resistance, wear resistance and sharpness are improved compared to cobalt highs. chamfer. Deburring.... Read More

The hexagonal shaft (6.35 mm) is ideal for C chamfering and deburring in field work. Since the blade is coated with titanium, burr welding to the blade is reduced. It has a long life. The three-flute provides a stable cutting balance with good cutting balance and little chatter. Work material: Al... Read More

Excellent sharpness with a high-speed tip with a breaker. Since the tip is replaceable, there is no need for re-polishing. * The capacity value is the value when TM32GUR is installed. When using TM32GSR, the maximum processing diameter is reduced by about 2 to 3 mm.

The hexagonal shaft (6.35 mm) is ideal for C chamfering and deburring in field work. A smooth chamfered surface finish is possible with a single blade. Since the blade is coated with titanium, burr welding to the blade is reduced. It has a long life. Work Material: Aluminum, Iron, Resin, Copper, ... Read More

The hardened material is CBN polished to form a sharp blade without burrs. It also has higher dimensional accuracy and achieves a long life. It also gives good results at relatively slow cutting speeds. Suitable for high chrome alloy steels such as stainless steel

The cutting edge is sharp and the chips are well removed, enabling a clean chamfer. For iron, aluminum, brass, copper, plywood, etc.

Titanium coating improves durability and wear resistance. Hexagonal shaft that does not slip even with a chuck! For chamfering wood, light metal, and iron. For chamfering, deburring, and expanding the hole diameter of the inner surface of pipes, and for counterbore processing.

* If you order by cash on delivery, it may be shipped the next day or later.

For counterbore, chamfering, and deburring. There is no chatter. Can be processed into a perfect circle. Excellent centering. Processing speed is high. Long life. Machine work or manual work! (For difficult-to-cut materials and SUS)

Efficient work is possible because secondary burrs are hard to come out and it is durable. It can be used both mechanically and manually. Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum Alloy.

C-chamfering cutter using molten highs

Efficient work is possible because secondary burrs are hard to come out and it is durable. Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum Alloy.

Convenient for chamfering hole edges, deburring, and chamfering countersunk screws. It can be used for iron, stainless steel, and non-ferrous metals. Since the cutting edge is sharply finished, the cutting powder is well brushed and accurate and clean chamfering is possible. Work Material: Iron, ... Read More

The heat-treated high-speed steel is sharpened by CBN polishing. A deep and sharp cutting edge. Work Material: Steel, Casting, Non-Ferrous Metals and Light Metals, Stainless Steel.

Hexagonal shaft (6.35 mm) shank specifications make work setting easy. Minimize burrs and chatter. Work Material: Iron, Cast Iron, Non-Ferrous Metals, Light Metals.

The center ring that can perform perfect circular processing without chatter is outstandingly high in processing speed.

For processing hard, non-sticky materials * When processing soft and highly ductile (sticky) materials such as aluminum alloys and copper alloys, use "Mentridrill".

The manufacturer's original cutting edge design provides a beautiful finish without chattering. Chamfering of threaded holes, chamfering of curved holes, enlargement of holes, counterbore, deburring of holes, etc. can be processed smoothly. The unique groove shape allows curled chips to be di... Read More

It can also be used for countersunk and pipe chamfering wood when tightening wood screws, light metals such as aluminum and copper, and mild steel materials that have not been hardened. * Please use at a drill speed of 5,000 rpm or less.

It is a non-coated counter sink. For chamfering.

Adopting a blade shape exclusively for chamfering enables high-speed chamfering with less burrs

Chamfering the inner diameter of the pipe, deburring hole Chamfering the edge, deburring

By adopting a 3-flute shape for the cutting edge, chips can be discharged well and a beautiful finish can be obtained. Work material: Iron, casting, stainless steel.

For counterbore, chamfering, and deburring. There is no chatter. Can be processed into a perfect circle. Excellent centering. Processing speed is high. Long life. Machine work or manual work! (For aluminum)

Longer life due to titanium coating. Beautiful surface finish without chattering. Smooth surface raising with a single blade.

A mini chamfer that can be chamfered and deburred by milling the front and back of the drill hole !! Since it is a spiral blade, the sharpness is smooth. It is a blue coating specification of the new grade MT8 that fits all materials.