Spherical & Other Countersinks

Longer life due to titanium coating. Beautiful surface finish without chattering. Smooth surface finish with a single blade.

High speed and high accuracy even though it is manual! It is possible to chamfer 12 edges of blocks of 50 x 50 x 20 size in about 30 seconds. It doesn't get scratched, it doesn't take up much space, the chamfered surface is shiny and quiet, and there is little scattering of chips. Chamfer... Read More

It can be used for various purposes such as chamfering, deburring, and widening holes. For iron, aluminum, brass, copper, wood, etc.

It can also be used for countersunk and pipe chamfering wood when tightening wood screws, light metals such as aluminum and copper, and mild steel materials that have not been hardened. * Please use the drill speed at 5000 rpm or less.

For chamfering and deburring after drilling holes in metal materials. Chamfering cutter for stainless steel!] Ideal for deburring and chamfering after drilling a metal material! Since it is a perforated type chamfering cutter, chips can be removed smoothly! The material is HSS-CO and highly durab... Read More

For processing soft and sticky materials

Ideal for chamfering and deburring countersunk screws. High durability with high-speed steel for deburring and chamfering after drilling

The hexagonal shaft (6.35 mm) is ideal for C chamfering and deburring in field work. A smooth chamfered surface finish is possible with a single blade. Since the blade is coated with titanium, burr welding to the blade is reduced. It has a long life. Work Material: Aluminum, Iron, Resin, Copper, ... Read More

The cutting edge is sharp and the chips are well removed, enabling a clean chamfer. For iron, aluminum, brass, copper, plywood, etc.

Titanium coating improves durability and wear resistance. Hexagonal shaft that does not slip even with a chuck! For chamfering wood, light metal, and iron. For chamfering, deburring, and expanding the hole diameter of the inner surface of pipes, and for counterbore processing.

Efficient work is possible because secondary burrs are hard to come out and it is durable. It can be used both mechanically and manually. Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum Alloy.

C-chamfering cutter using molten highs

Efficient work is possible because secondary burrs are hard to come out and it is durable. Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum Alloy.

For processing hard, non-sticky materials * When processing soft and highly ductile (sticky) materials such as aluminum alloys and copper alloys, use "Mentridrill".

It can also be used for countersunk and pipe chamfering wood when tightening wood screws, light metals such as aluminum and copper, and mild steel materials that have not been hardened. * Please use at a drill speed of 5,000 rpm or less.

Chamfering the inner diameter of the pipe, deburring hole Chamfering the edge, deburring

Longer life due to titanium coating. Beautiful surface finish without chattering. Smooth surface raising with a single blade.

Unique blade shape using high-speed steel. It cuts sharply even if you catch the natural roll tape and push or pull it. You can easily replace the blade with a screwdriver. Made of resin that is easy to hold, light and slippery. Since the cut end is clean, post-processing is super easy. 0.5mm PVC... Read More

It is a chip cleaning tool that was unlikely. The handle part has a protective guard of Φ130 mm. A set with a shovel on the tip hook. For cleaning metal chips generated by cutting such as lathes.

The outer diameter of round bars and pipes with a diameter of 8 to 28 mm can be easily chamfered. Since the counter sink can be rotated continuously, your wrist will not get tired. For chamfering the outer diameter of pipes and round bars.

It is a unique design that suppresses chattering and has excellent centripetal properties. It has excellent sharpness and excellent chip evacuation. Work Material: Steel, Alloy Steel, Stainless Steel, Copper Alloy, Aluminum Alloy.

Using a 40mm crank type holder, troublesome burrs can be easily removed. Since the counter sink can be rotated continuously, your wrist will not get tired. A counter sink that does not tire your wrists.

You can chamfer and deburr the hole edge. Iron, stainless steel, non-ferrous metals, etc.

Cobalt high-speed steel is used as the base material, and it has excellent wear resistance and heat resistance. The surface hardness is high due to the surface titanium coating treatment, and heat resistance, wear resistance and sharpness are improved compared to cobalt highs. By adopting a 3-flu... Read More

Outer diameter chamfering tools for round bars, pipes, etc. You can easily chamfer the outer circumference of almost all materials.

It can be used for deburring all plastic molded products and soft materials. R250mm ceramic blade with convex radius can be replaced and used.

Three types of HSS spare blades can be used for materials from plastic to aluminum, brass, casting, and iron. Chamfering bar used for chamfering and deburring products and parts * The blade is sharp and dangerous. Please handle with care.

There are few burrs and chattering, and the surface roughness is clean. Work material: Aluminum alloy, copper, plastic, soft iron.

The KOPAL chamfering unit is made up of a combination of the main body, blade, and guide. The conical guide whose height can be adjusted by the spring serves as the centering of the work. The high-speed steel blade is locked with a nut and the protrusion of the blade can be set. Chamfering of out... Read More

For ironwork

Suitable for deburring all plastics and soft metals and deburring parting lines.