Diamond (CBN) Cutter Wheels
Diamond (CBN) cutters and wheels have a longer life compared to GC and WA grinding wheels, and have the advantage of eliminating the need for grinding wheel replacement. The finished surface is also beautiful and has the advantage of being environmentally friendly. CBN is also called cubic boron nitride, and diamond or CBN is selected depending on the material to be ground. Diamond (CBN) cutters are mainly used for grinding electronic parts, semiconductors, automobile parts, bearings, dies, etc. Cup wheels are often used for chamfering and surface grinding of concrete, blocks and stones.
Other Related Pages
Nishigaki Industrial Replacement diamond whetstoneDiamond whetstone for Nishigaki Easy Blade Sharpening (N-840) and Nishigaki Blade Sharpening Master Tipped Saw (N-822). It can also be used as Nishigaki Early Sharpening (N-845).Outer Diameter (Φmm) 100 (for dry process) Abrasive Grain Size 150# Diamond width (mm) 18: With double-sided slit Hole Diameter (Φmm) 20(15)from S$26.99Min. 2 days-
-
-
- Tsuboman NV polisherNo-vibe (vibration-free) polisher. Easy to put on and take off because it has a boss. For medium / light grinding of concreteOuter Diameter (Φmm) 100 Tip Width (mm) 13 Tip thickness (mm) 3 RoHS directive (corresponding to 10 substances) Correspondence Applicable Workpiece Materials For concrete Mounting Hole M10 screwfrom S$219.90Min. 4 days
- MonotaRO Diamond Disc Titanium CoatTitanium coating improves durability! Correct slit direction improves clogging prevention effect! For re-polishing mowing tipped saws, mowing blades, scissors, sickles, for cutting PVC corrugated sheets, PVC pipes, etc. *Do not use for anything other than its intended purpose. * Please be careful... Read MoreAbrasive Grain Size #150 Thickness (mm) 1.3 Outer Diameter (Φmm) 100 Maximum Rotation Speed (min-1[rpm]) 15000 Diamond width (mm) 20 Hole Diameter (Φmm) 20 (supplied ring 15) Specification Polishing / cutting Surface Treatment Titanium coating
- MonotaRO Diamond dry cup surfaceSurface type ideal for a wide range of grinding. Overwhelming cost performance! The cup part uses a high-quality machined product with little blurring, and uses diamond particles that have a good balance between grinding power and durability. For chamfering concrete, blocks, bricks and roof tiles... Read MoreMaximum Operating Speed (min -1 [rpm]) 15200 Outer Diameter (Φmm) 100 Specification Dry type Diamond Layer Thickness (mm) 5.5 Included Accessories 15Φmm ring Suitable Material Concrete, block, brick, tile Hole Diameter (Φmm) 20 Type Surface Tip Width (mm) 7
- MonotaRO Diamond dry cup doubleDouble type for medium grinding that is smooth and speedy with 2 blades. Overwhelming cost performance! The cup part uses a high-quality machined product with little blurring, and uses diamond particles that have a good balance between grinding power and durability. For chamfering concrete, block... Read MoreIncluded Accessories 15Φmm ring Maximum Operating Speed (min -1 [rpm]) 15200 Suitable Material Concrete, block, brick, tile Outer Diameter (Φmm) 100 Specification Dry type Type double Diamond Layer Thickness (mm) 5.5 Hole Diameter (Φmm) 20 Tip Width (mm) 8
- MonotaRO Diamond dry cup turboTurbo type ideal for finish grinding of large areas. Overwhelming cost performance! The cup part uses a high-quality machined product with little blurring, and uses diamond particles that have a good balance between grinding power and durability. For chamfering concrete, blocks, bricks and roof t... Read MoreOuter Diameter (Φmm) 100 Tip Width (mm) 14 Maximum Operating Speed (min -1 [rpm]) 15200 Included Accessories 15Φmm ring Hole Diameter (Φmm) 20 Diamond Layer Thickness (mm) 5.5 Suitable Material Concrete, block, brick, tile Specification Dry type Type Turbo
- MonotaRO Diamond dry cup clothA cross type with a thick and wide blade that is ideal for heavy concrete grinding. Overwhelming cost performance using high-quality machined products with little blurring in the cup part! Uses diamond particles with a good balance of grinding power and durability. For chamfering concrete, blocks... Read MoreIncluded Accessories 15Φmm ring Diamond Layer Thickness (mm) 5.5 Hole Diameter (Φmm) 20 Tip Width (mm) 8.5 Type cross Suitable Material Concrete, block, brick, tile Outer Diameter (Φmm) 100 Maximum Operating Speed (min -1 [rpm]) 15200 Specification Dry type
- Three Hand Diamond Wheel NormalDiamond can be electrodeposited without gaps and smooth polishing is possible. Brush cutter, tipped saw, scissors, sickle knife, polishing of other cemented carbide, etc.Abrasive Grain Size #180 Outer Diameter (Φmm) 100 Included Accessories 15mm bush Hole Diameter (Φmm) 20 Specification Both sides Type Normal type Material Tool steel, industrial diamond
- MonotaRO Diamond dry cup singleSingle type ideal for wall surfaces and rough grinding. Overwhelming cost performance! The cup part uses a high-quality machined product with little blurring, and uses diamond particles that have a good balance between grinding power and durability. For chamfering concrete, blocks, bricks and roo... Read MoreOuter Diameter (Φmm) 100 Maximum Operating Speed (min -1 [rpm]) 15200 Included Accessories 15Φmm ring Hole Diameter (Φmm) 20 Diamond Layer Thickness (mm) 5.5 Tip Width (mm) 9 Suitable Material Concrete, block, brick, tile Specification Dry type Type Single
- LOBSTER (LOBTEX) Diamond wheel "cutting king" (dry type)Sharpness / speed priority type. Convincing cost performance and fulfilling variations. For cutting general concrete products, blocks, slate, mortar, bricks, tiles, etc.Width of Diamond Layer, W (mm) 7 Specification Dry type
- Three Hand Diamond dry cup X typeFor chamfering and grinding large areas! For rough / medium grinding For grinding concrete, blocks, bricks, stones, etc.Material Tool steel, industrial diamond Type X type Suitable Material Concrete, block, brick, stone, etc. Specification Dry type
- TRUSCO Electroplated Diamond DiscSince diamond abrasive grains are dispersed and electrodeposited in a pattern rather than on the entire surface, they have excellent polishing power and can be polished without clogging. Both sides can be used. Polishing of tipped saws, brush cutters, carbide drills, etc. Chamfering tiles, stones... Read MoreOuter Diameter x Thickness x Hole Diameter (mm) 100×0.73×20 Maximum Operating Speed (min -1 [rpm]) 12000 Set Contents 15mm bush Mass (g) 34.65 Material Tool steelfrom S$33.99Min. 2 days
- Jupiter Diamond wheel Titanium ZebraAchieves elasticity and strength using a base that is resistant to chips and cracks Disc grinder 110 mm type can be used Uses diamond that is optimal for polishing Brush cutter, tipped saw, scissors, sickle knife, polishing of other cemented carbide, etc.Diamond Layer Thickness (mm) 1.0±0.1 Outer Diameter (Φmm) 100 Included Accessories 15mm bush Hole Diameter (Φmm) 20 Diamond Layer Width (mm) 25 Maximum Rotation Speed (min-1[rpm]) 6000 Specification Both sides Material Tool steel, industrial diamond Type Zebra type
- LOBSTER (LOBTEX) Diamond Wheel "King of Cutting" (Dry Type)A more beautiful finish. Convincing cost performance and fulfilling variations. Wave type For cutting general concrete products, blocks, slate, mortar, bricks, tiles, etc.Specification Dry type
- Jupiter Diamond wheel normalAchieves elasticity and strength using a base that is resistant to chips and cracks Disc grinder 110 mm type can be used Uses diamond that is optimal for polishing Brush cutter, tipped saw, scissors, sickle knife, polishing of other cemented carbide, etc.Type Normal type Outer Diameter (Φmm) 100 Material Tool steel, industrial diamond Specification Both sides Included Accessories 15mm bush Hole Diameter (Φmm) 20
- Tsuboman Mactor III SilverA cup wheel dedicated to removing the paint film. In the Maktor series, the sintered diamond tip cuts the coating film sharply, making peeling work quick and easy. Moreover, it comes with a shock absorber, so the finish is very beautiful.Number of Tips 9 Outer Diameter (Φmm) 92 RoHS directive (corresponding to 10 substances) Correspondence Hole Diameter (Φmm) M10 Type Thick film Specification Wet and dry
- LOBSTER (LOBTEX) Diamond wheel cutting Taro segment type (dry type)Dimension (mm) (1)305、(2)2.8、(3)7.0、(4)30.5 Mass (g) 1340 Blade Thickness (mm) 2.8 Inner Diameter (Φmm) 30.5 Outer Diameter (Φmm) 305 Maximum Rotation Speed (min-1[rpm]) 6300 Blade Width (mm) 7 Trusco Part No. 788-7159 Suitable Model Engine cutter
- Three Hand Diamond dry cup D typeFor smooth chamfering and grinding! For rough / medium grinding For grinding concrete, blocks, bricks, stones, etc.Suitable Material Concrete, block, brick, stone, etc. Specification Dry type Hole Diameter (Φmm) 20 Material Tool steel, industrial diamond Included Accessories 15mm bush Type D type Outer Diameter (Φmm) 100
- K.I. Drill G1 bladeUses the same special electrodeposition material as the in-rotor blade! Innumerable diamonds are studded on the base, and burrs do not appear when cutting PVC pipes, making it ideal for chamfering! The kitchen panel is cut cleanly without hangnail! Cutting hard PVC pipes, hard tiles, artificial m... Read MoreThickness (mm) 1.5
- Jupiter Diamond wheel zebraAchieves elasticity and strength using a base that is resistant to chips and cracks Disc grinder 110 mm type can be used Uses diamond that is optimal for polishing Brush cutter, tipped saw, scissors, sickle knife, polishing of other cemented carbide, etc.Abrasive Grain Size #180 Outer Diameter (Φmm) 100 Included Accessories 15mm bush Hole Diameter (Φmm) 20 Material Tool steel, industrial diamond Specification Wet and dry Type Zebra type
- RELIEF Cup SanderCarbide diamond particles are electrodeposited. Cup Thunder price appeal product! Manufactured in a factory certified by ISO9002. For grinding concrete, mortar, block bricks, etc.! * Be sure to install according to the direction of rotation of the power tool. * Be sure to use protective equipment... Read MoreOuter Diameter (Φmm) 100 Maximum Operating Speed (min -1 [rpm]) 14500 Hole Diameter of Attached Ring (Φmm) 15 Hole Diameter (Φmm) 20 Diamond Layer Thickness (mm) 6 Blade Thickness (mm) 6 Suitable Material Concrete, mortar, block brick, etc.
- iHelp Diamond cup sander wave bladeDiamond cup sander with an outer diameter of 100 mm for disc grinders. Wave type specifications with fast grinding speed. Ideal for finishing polishing work over a large area, such as leveling work and finishing work for foundation work. Please use for chamfering, deburring, flat surface and curv... Read MoreOuter Diameter (mm) 100 Maximum Operating Speed (min -1 [rpm]) 15200 Hole Diameter (mm) 20 (with Φ15 ring) Blade Thickness (mm) 5.5 Adaptation Disc grinder Specification Wave type for dry grindingfrom S$32.99Min. 2 days
- Tsuboman Mactor III RedNumber of Tips 6 Outer Diameter (Φmm) 92 RoHS directive (corresponding to 10 substances) Correspondence Hole Diameter (Φmm) M10 Type Standard typefrom S$149.90Min. 2 days
- LOBSTER (LOBTEX) Diamond wheel NEW laser (dry type)Thorough pursuit of "sharpness + long life and safety"! Achieves the best performance! Ideal for difficult-to-cut materials such as hard concrete, reinforced concrete, and stone! (Of course, mortar blocks are also OK) ” for safe, demanding work! For cutting hard concrete, secondary conc... Read MoreSpecification Dry type
- TSUMURA KOGYO Replacement Diamond Grinding Wheel Gold for Angle GrinderHigh durability spare blade for disc grinderDimension (mm) 100×1×20(15) RoHS directive (corresponding to 10 substances) Correspondence Material Diamond wheel titanium
- Tsuboman Shizune Mactle Orange MCS-926MDue to the special filter, the jarring sound does not sound. For peeling paint film and base steel sheet * For safety, be sure to use the dedicated guide cover.Outer Diameter (Φmm) 92 RoHS directive (corresponding to 10 substances) Correspondence Hole Diameter (Φmm) M10 Mounting Hole M10 screw Specification Wet and dry
- MonotaRO Diamond Drill Bit for Angle Grinder InstallationSpeedy drilling with welded diamonds! It can be attached to a disc grinder for easy drilling. Since it does not require water, it does not pollute the surroundings. For drilling holes in general porcelain tiles, hard porcelain tiles, stone tiles, granite, roof tiles, etc. * Be sure to attach the ... Read MoreEffective Length (mm) 30 Overall Length (mm) 60.5 Mounting Screw Diameter M10 Applicable Workpiece Materials Tiles, granite, tiles, etc.
- LOBSTER (LOBTEX) Welded diamond wheelCompared to the resinoid whetstone, it has "less dust / odor / sparks and a longer life", so it is a "work environment-friendly product" that saves the trouble of replacement! Cutting castings, ductile cast iron pipes, and powder-coated ductile cast iron pipes greatly improves... Read MoreSpecification Dry type
- TOP KOGYO Diamond wheel for PVC pipeYou can lightly cut PVC pipes.Blade Thickness (mm) 1.2 Outer Dimensions (mm) 105 Hole Diameter of Attached Ring (Φmm) 15 Inner Diameter (mm) 20 RoHS directive (corresponding to 10 substances) Correspondence Applicable Workpiece Materials PVC pipefrom S$63.99Min. 2 days
- NANIWA (Naniwa Abrasive Mfg) Welding diamond dry corea 21Positioning is OK without amazing drilling speed guide Easy to attach to a disc grinder No need for water, no curing, easy to clean up afterwards For drilling holes in general porcelain tiles, hard porcelain tiles, stone tiles, granite, roof tiles, etc. * When using, be sure to attach the safety ... Read MoreEffective Length (mm) 30 Overall Length (mm) 60 Mounting Screw Diameter M10 Applicable Workpiece Materials Tiles, granite, tiles, etc.
- TRUSCO Diamond cup wheelDiamond tips are placed on the outer and inner circumferences for efficient grinding. The cooling holes on the board reduce heat storage, and 14 chips are used for a long life. Grinding hard building materials such as concrete, blocks and bricks. Tool used: Disc grinder. * Be sure to wear protect... Read MoreHole Diameter (Φmm) 20 Specification For rough / medium finish Outer Diameter (Φmm) 100 Mass (g) 290 Trusco Part No. 402-3188 Maximum Operating Speed (min -1 [rpm]) 14500 Suitable Material Concrete, block, brick, etc. Thickness (mm) 5 Material Carbon steel
- BOSCH Diamond wheel V series DW105Fast cutting, thin 1.4mm thickness Cutting hard tiles (porcelain, stone tools, stone), general tiles, hard tiles (Sekishu, Sanshu, Awaji)Blade Thickness (mm) 1.4 Outer Diameter (Φmm) 105 Dimensions, Width W x Height H x Depth D (mm) 105×105×1.0 Blade height (mm) 12 Trusco Part No. 496-1188 Mass of Main Unit (g) 76 Material (Blade) Diamond and metal bonds Material (Main Unit) Steel Object of Cutting Tile, tile Type Wave type
- TRUSCO Electroplated diamond wheel (for polishing)For finish polishing. Since it is molded into an R shape, hard and brittle workpieces can be finished neatly. Polishing of roof tiles, marble, FRP, refractory bricks, glass, granite, etc. * If it is clogged, remove the chips with a brush or the like. Be sure to wear protective equipment such as a... Read MoreMaterial / Finish (Base) S45C Thickness (mm) 10 Outer Diameter (Φmm) 102 Mass (g) 104.2 Hole Diameter (Φmm) 15 Maximum Operating Speed (min -1 [rpm]) 15000 Trusco Part No. 171-4449 Abrasive Grain Size 60 Suitable Tool Disc grinder Specification Wet and dry
- Takashiba Gimune Mfg. FIRST MAN diamond discFirst Man's Mirror Slit R Diamond Disc is a double-sided symmetrical slit (patented) Regardless of whether it is polished or cut, the grooves on both sides improve the brushing of chips and prevent clogging. 1: Double-sided symmetrical slits allow straight cutting and prevent clogging! 2: Tit... Read MoreAbrasive Grain Size #200 Width (mm) (Diamond) 20 Thickness (mm) 0.8 Dimension (Φmm) 100
- Sankyo Diamond Industrial Tomax 8Maximum Operating Speed (min -1 [rpm]) 15200 Mass (g) 252 Number of Tips 8 Trusco Part No. 859-0711 Outer Diameter (mm) 92 Material CP (diamond), iron RoHS directive (corresponding to 10 substances) Correspondence Shape Cup type Suitable Tool Disc grinder Thread Diameter (mm) M10 Color Whitefrom S$179.90Min. 2 days
- Tsuboman Petit Mactle with SAFor peeling off the paint film and narrow areas (tile base leveling, handrails, straw sticks (gymnasium roof))Outer Diameter (Φmm) 31 RoHS directive (corresponding to 10 substances) Correspondence Mounting Hole M10 screwfrom S$99.90Min. 2 days
- EARTH MAN Titanium coated diamond discEasy polishing of bent blades and straight blades with one piece! Bent blades such as sickles, nata, and climbing sickles can be sharpened on curved surfaces. On the flat surface, you can sharpen straight blades such as scissors, mowing blades, and hoe. The lock nut is hidden and easy to use. Ele... Read MoreAbrasive Grain Size #200 Outer Diameter (Φmm) 100 Hole Diameter (Φmm) 20 (Attached ring: 15) Maximum Rotation Speed (min-1[rpm]) 6000 Surface Treatment Titanium coating
