Diamond Grinding Discs / Wheels
The disc type is a disc-type cutting and polishing product used for grinders that perform cutting and polishing. Discs range from roughing types that can cut concrete, bricks, blocks, etc., to finishing types that can polish stones, glass, titanium, and deburr. This item is widely used from factories and construction sites that handle stone, wood, glass, etc. to people who do DIY at home. There are various types of discs for roughing and finishing, so you can choose the right one for your purpose.
MonotaRO Diamond Disc Titanium CoatTitanium coating improves durability! Correct slit direction improves clogging prevention effect! For re-polishing mowing tipped saws, mowing blades, scissors, sickles, for cutting PVC corrugated sheets, PVC pipes, etc. *Do not use for anything other than its intended purpose. * Please be careful... Read MoreAbrasive Grain Size #150 Thickness (mm) 1.3 Outer Diameter (Φmm) 100 Maximum Rotation Speed (min-1[rpm]) 15000 Diamond width (mm) 20 Hole Diameter (Φmm) 20 (supplied ring 15) Specification Polishing / cutting Surface Treatment Titanium coating- TRUSCO Electroplated Diamond DiscSince diamond abrasive grains are dispersed and electrodeposited in a pattern rather than on the entire surface, they have excellent polishing power and can be polished without clogging. Both sides can be used. Polishing of tipped saws, brush cutters, carbide drills, etc. Chamfering tiles, stones... Read MoreOuter Diameter x Thickness x Hole Diameter (mm) 100×0.73×20 Maximum Operating Speed (min -1 [rpm]) 12000 Set Contents 15mm bush Mass (g) 34.65 Material Tool steelfrom S$33.99Min. 2 days
- TRUSCO Electroplated diamond wheel (for polishing)For finish polishing. Since it is molded into an R shape, hard and brittle workpieces can be finished neatly. Polishing of roof tiles, marble, FRP, refractory bricks, glass, granite, etc. * If it is clogged, remove the chips with a brush or the like. Be sure to wear protective equipment such as a... Read MoreMaterial / Finish (Base) S45C Thickness (mm) 10 Outer Diameter (Φmm) 102 Mass (g) 104.2 Hole Diameter (Φmm) 15 Maximum Operating Speed (min -1 [rpm]) 15000 Trusco Part No. 171-4449 Abrasive Grain Size 60 Suitable Tool Disc grinder Specification Wet and dry
- EARTH MAN Titanium coated diamond discEasy polishing of bent blades and straight blades with one piece! Bent blades such as sickles, nata, and climbing sickles can be sharpened on curved surfaces. On the flat surface, you can sharpen straight blades such as scissors, mowing blades, and hoe. The lock nut is hidden and easy to use. Ele... Read MoreAbrasive Grain Size #200 Outer Diameter (Φmm) 100 Hole Diameter (Φmm) 20 (Attached ring: 15) Maximum Rotation Speed (min-1[rpm]) 6000 Surface Treatment Titanium coating
- YANASE power diamond discFor rough polishing. By strongly welding high-quality diamonds, we have achieved unprecedented sharpness and longevity. Large diamonds are hard to clog. There is less dust than offset whetstones. Polishing of concrete and stone. Titanium polishing. Keren work. Black skin removal of metal. Deburri... Read MoreOuter Diameter x Thickness x Hole Diameter (mm) 100×14×20(15) Mass (g) 130 Maximum Operating Speed (min -1 [rpm]) 13000 Trusco Part No. 331-1091 Abrasive Grain Size 40 RoHS directive (corresponding to 10 substances) Correspondence Specification Dry type
- PROXXON Diamond DiscPolishing of metal blades, glass, stones, etc.Disc Diameter (Φmm) 50×10 RoHS directive (corresponding to 10 substances) Correspondence Material Diamond electrodeposition (approx. 150) Suitable Model Micro disc grinder (No.27520)from S$85.99Min. 2 days
- Sankyo Diamond Industrial Surfacer Ace DXThe shockless flange reduces hand and arm vibration and improves workability. By designing the spanner hook according to each company, it can be easily installed and removed. It can be used not only for concrete but also for grinding stones. Grinding concrete, stone, blocks, bricks, etc.Outer Diameter (Φmm) 100 Maximum Operating Speed (min -1 [rpm]) 14500 Mass (g) 300 Trusco Part No. 397-0981 Thickness (mm) 6.0 Suitable Material Concrete, stone, block, brick, etc. RoHS directive (corresponding to 10 substances) Correspondence Specification For rough / medium finish Hole diameter M10from S$149.90Min. 2 days
- Sanwa Kenma Diamond CeramicaVitodia: A long-life rough cutting type with strong grinding power, designed by taking advantage of the excellent abrasive grain holding power of ceramic bonds. Metal diamond: A rough-cut type with excellent finished surface accuracy, designed to fit on curved surfaces by a unique manufacturing m... Read MoreSpecification Required tool options: dedicated pad Finish Processing Wet Abrasive Materials granitefrom S$52.99Min. 15 days
- Sanwa Kenma Easy KiraraA flexible type resin diamond pad used for the process from rough cutting to glossiness. It has excellent flexibility and sharpness and fits well on curved surfaces. Since it is lightweight, there is little vibration during rotation and it is easy to handle. A hand polisher tool used for the proc... Read MoreAbrasive Materials Granite, marble Specification Required tool options: dedicated pad Product Type Resin diamond Finish Processing Wetfrom S$32.99Min. 8 days
- Sankyo Diamond Industrial Surfacer Ace LightThe shockless flange reduces wrist vibration. By reducing the weight of the main body, the burden on the operator has been reduced. By matching the detachable spanner hook to each power tool manufacturer, it can be easily attached and detached with the spanner attached to the power tool. Grinding... Read MoreOuter Diameter (Φmm) 100 Thickness (mm) 6 Maximum Operating Speed (min -1 [rpm]) 14500 Suitable Material Concrete, stone, block, brick, etc. Hole diameter M10 Specification For rough / medium finish Trusco Part No. 397-0973 Mass (g) 300from S$119.90Min. 3 days
- DREMEL EZ-Lock grinding wheelUsed for deburring, rusting and other common grinding of most metals, including stainless steel, copper and hardened iron. Deburring and rustingOuter Diameter (Φmm) 38.1 Mass (g) 20 Thickness (mm) 1.9 Shank Diameter (Φmm) 3.2 Trusco Part No. 407-5790 Material Aluminum oxide
- PROXXON Tungsten Cutting Wheel for Angle GrinderYou can perform high-rate work that far exceeds that of whetstones and paper. For wood Roughing of woodInner Diameter (Φmm) 10 Suitable Model 27520 Outer Diameter (Φmm) 50 RoHS directive (corresponding to 10 substances) Correspondence Material Tungsten carbidefrom S$119.90Min. 4 days
- Sanwa Kenma Flexible Pat SFPolishing work is possible in places where water cannot be used. A dry tool for low-speed disc grinders used in the process from rough cutting to polishing of stone (granite). Use by attaching the hook-and-loop fastener on the back to a special rubber pad or bake pad. If you use the whole process... Read MoreFinish Processing Dry type Abrasive Materials granitefrom S$48.99Min. 8 days
- GOEI SEISAKUSYO Magic diamond disc # 100Abrasive Grain Size #100 Outer Diameter (Φmm) 100 Mass (g) 118 Width (mm) 20 Hole Diameter (Φmm) 20 Trusco Part No. 852-4848from S$189.90Min. 7 days
- Airtech Japan Discus diamondWith the new welding method, we have achieved sharpness and long life that surpasses electrodeposition! The diamond has a large protrusion, has good sharpness and is less likely to be clogged, and the special metal and diamond are firmly bonded and less likely to fall off. Adhesion that fits well... Read MoreOuter Diameter (Φmm) 100 Maximum Operating Speed (min -1 [rpm]) 12000 Hole Diameter (Φmm) 15 RoHS directive (corresponding to 10 substances) Correspondencefrom S$249.90Min. 4 days
- TAKEKAWA DIA TOOL Great Kenma-kun Concrete chipType Decachip for concrete base Hole Diameter (Φmm) 20H (15 rings) Outer Diameter (Φmm) 100from S$169.90Min. 3 days
- TAKEKAWA DIA TOOL Awesome Kenma Multi-typeHole Diameter (Φmm) 20H (15 rings) Type Multi type Outer Diameter (Φmm) 100from S$149.90Min. 3 days
- PFERD CC grind solid diamond grinding wheelBy introducing CC Grind Solid Diamond, Faired has a lineup of products with the highest hardness in the field of grinding wheels. This is a new product for high-hardness materials and difficult-to-cut materials that could not be processed with conventional products such as aluminum oxide and sili... Read MoreMaximum Operating Speed (m/s) 30～40from S$339.90Min. 5 days
- DREMEL Aluminum oxide grinding wheelUsed for deburring, rusting and other common grinding of most metals, including stainless steel, copper and hardened iron. grindingShank Diameter (Φmm) 3.2 Trusco Part No. 407-5099 Outer Diameter (Φmm) 22.2 Mass (g) 10from S$7.39Min. 5 days
- TAKEKAWA DIA TOOL Great Kenma-kun, for steel plate substrateHole Diameter (Φmm) 20H (15 rings) Type For steel plate base Outer Diameter (Φmm) 100from S$149.90Min. 3 days
- TAKEKAWA DIA TOOL Terrible Kenma for concrete foundationType For concrete foundation Hole Diameter (Φmm) 20H (15 rings) Outer Diameter (Φmm) 100from S$169.90Min. 3 days
- YANASE Power diamond disc 100 mm straight typeFor medium polishing. By strongly welding high-quality diamonds, we have achieved unprecedented sharpness and longevity. Large diamonds are hard to clog. There is less dust than offset grindstones. Polishing of concrete and stone. Titanium polishing. Keren work. Black skin removal of metal. Debur... Read MoreOuter Diameter (Φmm) 100 Maximum Operating Speed (min -1 [rpm]) 13000 Mass (g) 135 Thickness (mm) 15 Hole Diameter of Attached Ring (Φmm) 15 Hole Diameter (Φmm) 20 Trusco Part No. 331-1104 Abrasive Grain Size 60 Recycled paper use mark Conformity Act on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) CorrespondenceDiscontinued
-
