Diamond Cutters
The diamond cutter is a tool that can cut hard materials such as stone, glass, and shells. It uses industrial diamond chips and features good bite and high cutting speed. There are various diamond cutters, but the dry type segment type cutter is the most popular. Ideal for cutting and grooving mortar and concrete. Thin diamond cutters are often sharper, easier to use, and more satisfying in terms of cost.
Other Related Pages
- MonotaRO Diamond cutter segment 5-packIdeal for DIY use, a great deal on a set of 5! Convincing sharpness at an overwhelmingly low price! A segment type that emphasizes sharpness and speed. * Pay attention to the direction of rotation, and install so that the direction of rotation of the blade and the power tool match. For cutting co... Read MoreIncluded Accessories Φ15mm ring Hole Diameter of Attached Ring (Φmm) 15 Maximum Operating Speed (min -1 [rpm]) 15300 Diamond Layer Width (mm) About 7 Specification Dry type (dry type) Type segment Diamond Layer Thickness (mm) About 2 Outer Diameter (Φmm) 105
- MonotaRO Diamond cutter segment high speedAlthough it is a basic type with good sharpness, it is also a product with excellent durability due to the hot press manufacturing method in which metal bonds are sintered by high temperature and high pressure. It is a segment type with excellent cutting power because the cutting edge is cut at r... Read MoreDiamond Layer Width (mm) 7 Specification Dry type (dry type) Type segment
- MonotaRO Diamond Cutter (Turbo) High SpeedAlthough it is a basic type with good sharpness, it is also a product with excellent durability due to the hot press manufacturing method in which metal bonds are sintered by high temperature and high pressure. A turbo type with a beautifully finished cut and seamlessly connected cutting edges. *... Read MoreDiamond Layer Width (mm) 8 Type Turbo Specification Wet and dry
- MonotaRO Diamond groove cutter U typeU-shaped grooving cutter with excellent cost performance. Since the U type can be cut larger than the V type, it is easy to pour the caulking agent. For grooving concrete, mortar and brick, and repairing cracks. * Pay attention to the direction of rotation, and install so that the direction of ro... Read MoreSpecification U groove, dry type Maximum Operating Speed (min -1 [rpm]) 15300 Hole Diameter of Attached Ring (Φmm) 15 Blade Thickness (mm) 10 Outer Diameter (Φmm) 100 Hole Diameter (Φmm) 20 Suitable Material Concrete, mortar, brick
- MonotaRO Five diamond cutters thinA great deal on a set of 5 pieces, an overwhelmingly low price, yet surprisingly sharp! It is a product with excellent durability due to the hot press manufacturing method in which metal bonds are sintered by high temperature and high pressure. A turbo type with a thin blade of 1.4 mm for quick c... Read MoreDiamond Layer Thickness (mm) 1.4 Outer Diameter (Φmm) 100 Hole Diameter of Attached Ring (Φmm) 15 Maximum Operating Speed (min -1 [rpm]) 15300 Diamond Layer Width (mm) 8 Specification Dry type Type Turbo Included Accessories Φ15mm ring
- MonotaRO Diamond cutter turbo 5-packIdeal for DIY use, a great deal on a set of 5! Convincing sharpness at an overwhelmingly low price! A turbo type with a beautiful cut surface. * Pay attention to the direction of rotation, and install so that the direction of rotation of the blade and the power tool match. For cutting concrete, b... Read MoreOuter Diameter (Φmm) 105 Hole Diameter of Attached Ring (Φmm) 15 Maximum Operating Speed (min -1 [rpm]) 15300 Diamond Layer Thickness (mm) About 2 Diamond Layer Width (mm) About 7 Type Turbo Specification Wet and dry Included Accessories Φ15mm ring
- MonotaRO Diamond corner cutterDiamond wheel with flange. Uses a blade that has a good balance between sharpness and durability. Since it has a flange, you can cut the corners. For cutting and cornering concrete, blocks, bricks, etc. * If the flange mounting screws become loose or wobble, stop using them immediately. * Pay att... Read MoreOuter Diameter (Φmm) 105 Maximum Operating Speed (min -1 [rpm]) 15300 Blade Thickness (mm) 2 Tip Width (mm) 7 Suitable Material Concrete, block, brick, etc. Nominal dimensions of screw M10 Specification Wet and dry
- Sumflex Diamond Cutter SetUsed for cutting glass, shells, tiles, stones, etc.Allowable Rotation Speed (min -1 [rpm]) 15000 Shank Diameter (Φmm) 2.34 Diameter (Φmm) 18、22、25 Suitable Material Glass, shells, tiles, stones, etc. Material Diamond
- Three Hand Diamond Cutter SegmentFor fast and efficient work! For cutting concrete, blocks, mortar, ALC, bricks, tiles, slate, etc.Diamond Layer Width (mm) 7 Specification Dry type Material Tool steel, industrial diamond Type segment
- MonotaRO Diamond Groove Cutter V TypeA V-shaped grooving cutter with excellent cost performance. Since the V type has a tapered shape, it excels in cutting into cracks and improves work efficiency. For grooving concrete, mortar and brick, and repairing cracks. * Pay attention to the direction of rotation, and install so that the dir... Read MoreOuter Diameter (Φmm) 100 Maximum Operating Speed (min -1 [rpm]) 15300 Specification V groove, dry type Blade Thickness (mm) 10 Suitable Material Concrete, mortar, brick Hole Diameter of Attached Ring (Φmm) 15 Hole Diameter (Φmm) 20
- Three Hand Diamond cutter turboThe cut surface is clean! For cutting secondary concrete products, blocks, mortar, ALC, bricks, tiles, slate, etc.Material Tool steel, industrial diamond Type Turbo Specification Wet and dry
- Sankyo Diamond Industrial RZ Protect Mark II (Diamond Cutter)Deep cutting for cutting reinforced concrete (10 mm reinforcing bar), straightness, clean cut type By extending the side tip, wear of the board is prevented. Achieves a significant increase in sharpness and life. Cutting concrete blocks, etc.Tip Width (mm) 6 Diamond Layer Width (mm) 6 Suitable Material Concrete block RoHS directive (corresponding to 10 substances) Correspondence
- EFFORT Inner cutterBy adopting a removable hexagonal spindle (6.35mm), it can be attached to a rechargeable impact driver (12V or more) and a disc grinder. Start up the drain port Cut the PVC pipe below the floor. Cut the rising cylinder of Vinimas below the floor. Uses a flange guide that cuts in parallel along th... Read MoreSuitable Material PVC pipe
- Ryuhomaru Double-sided Symmetrical Diamond Disc TitaniumDouble-sided symmetrical slit PAT for polishing tip saws and cutting envelope pipesAbrasive Grain Size #200 Substrate thickness (mm) 0.8 Outer Diameter (Φmm) 100 Ring Diameter (Φmm) 15 Hole Diameter (Φmm) 20 Diamond Layer Width (mm) 20 Mass (g) 70 Specification Dry type Suitable Material PVC pipe, etc.
- RELIEF Thin diamond cutterIt is a product that has both high cutting speed and beautiful finish of the cut surface. Since it is a thin type, resistance during cutting is reduced, and objects can be cut quickly and cleanly. It can cut porcelain tiles, kawara, bricks, concrete products, granite, building stones, PVC pipes, ... Read MoreHole Diameter (Φmm) 20 (when using bushing: 15) Diamond Layer Thickness (mm) 1.4 Type Dry type Outer Diameter (Φmm) 100 Diamond Layer Width (mm) 6
- RELIEF Diamond corner cutterSince it has a flange, you can cut the corners. You can process and cut corner surfaces. Ideal for cutting and cornering concrete with reinforcing bars, blocks, bricks, granite, etc.Blade Thickness (mm) 2 Hole Diameter (Φmm) 20 (when using bushing: 15) Tip Width (mm) 7 Outer Diameter (Φmm) 105
- IWOOD Diamond cutter Flange cutterBlade Thickness (mm) 2.2 Applicable Cutting Material Concrete / Stone Specification Dry type
- Jupiter Diamond cutter for roof tile1mm ultra-thin! Achieves a finish with few cracks on roof tiles and tiles! Hard tiles (porcelain, stoneware, pottery, stony tiles, etc.) Hard roof tiles (Sanshu, Ishishu, Awaji Kawara, etc.)Diamond Layer Thickness (mm) 1.2±0.1 Outer Diameter (Φmm) 105 Maximum Rotation Speed (min-1[rpm]) 13500 Included Accessories 15mm bush Hole Diameter (Φmm) 20 Diamond Layer Width (mm) 7 Specification Dry type Suitable Material Hard tile, hard tile Material Tool steel, industrial diamond
- RIKEN diamond Diamond cutter segmentA premium grade series that has both longevity and sharpness. ◎ Unreinforced concrete, block, mortar, red brick, secondary concrete product, asphalt ○ Interlocking, ALC, slate, reinforced concrete, granite, iron flat stoneRoHS directive (corresponding to 10 substances) Correspondence
- Sankyo Diamond Industrial SE Protect Mark IIDeep cutting for cutting reinforced concrete (10 mm rebar), straightness, sharpness-oriented type By extending the side insert, wear of the board is prevented (protected). Achieves a significant increase in sharpness and life. Concrete, block cuttingDiamond Layer Width (mm) 6 Tip Width (mm) 6.0 Suitable Material Concrete block RoHS directive (corresponding to 10 substances) Correspondence Specification Dry type
- HOUSE B.M Inside cutter J typeOne-touch attachment / detachment to the impact driver with a hexagonal shaft (6.35 mm) spindle. It can be directly attached to a 100mm disc grinder by removing the hexagonal shaft (6.35mm) spindle. Uses a top guide that cuts in parallel along the top of the start-up pipe. The cutting length (dep... Read MoreSuitable Material PVC pipe Trusco Part No. 307-2860 Cutting Capacity, Wall Thickness (mm) 7.0 (maximum) Mass (g) 220
- Tsuboman Tile 2000 Usuba for precision cuttingIt has the best cut accuracy and feel. Since it is a stiff stepped board, it does not bend like a conventional thin blade cutter. General tiles, hard tiles, high-class decorative tiles, ceramic kitchen panels (not suitable for wood plywood), etc.Tip thickness (mm) 1.1 Tip Width (mm) 5 Specification Dry type
- Sumflex Diamond drill cutterUsed for cutting glass, shells, tiles, stones, etc.Abrasive Grain Size #180 Thickness (mm) 1 Allowable Rotation Speed (min -1 [rpm]) 3000 Shank Diameter (Φmm) 6 Suitable Material Glass, shells, tiles, stones, etc.
- Jupiter Diamond U Groove CutterThe repair area can be scraped wider than the V-groove, making it easier to pour the filler. For repairing cracks in concrete, mortar, bricks, slate, etc.Material Tool steel, industrial diamond Blade Thickness (mm) 10 Specification U groove, wet and dry Hole diameter Φ20mm Suitable Material Concrete, mortar, brick, slate, etc. Outer Diameter (Φmm) 100
- Tsubosan Diamond disc sharpenerIdeal for re-polishing mowing tipped saws and blades, and chamfering bricks and tiles. * If it is clogged, remove it with a brush etc. before use.Abrasive Grain Size #200 Outer Diameter (Φmm) 100 Diamond width (mm) 20 Hole Diameter (Φmm) 20
- Heiwa Technica NASTON GOLD TC-1It excels in precision cutting of cemented carbide, philite, tungsten, and other magnetic materials, as well as cutting difficult-to-cut composite materials, and has a soft sharpness that suppresses chipping and improves processing quality. For cutting cemented carbide, philite, tungsten, and oth... Read MoreAbrasive Grain TC (diamond)from S$35.99Min. 2 days
- Sankyo Diamond Industrial SD cutter 8XCorrugated substrate: Prevents substrate heat storage and maintains stable sharpness. Turbo chip: The resistance applied to the chip is reduced and the sharpness is improved. The rim type has a seamlessly connected cutting edge, so the cut end is beautifully finished. Cutting of concrete products... Read MoreTip Width (mm) 8.0 RoHS directive (corresponding to 10 substances) Correspondence
- EFFORT Inner cutterBy adopting a removable hexagonal shaft (6.35 mm) press-fit shank, it can be attached to a rechargeable impact driver (12 V or more) and a 100 mm disc grinder. Uses a flange guide that cuts in parallel along the top of the start-up pipe. (Adjustable cutting depth) * Adjustment range: minimum 25 m... Read MoreBlade Outer Diameter (mm) 38 Suitable Material PVC pipefrom S$48.99Min. 2 days
- Asahi Diamond Industrial Merritite << wet, for general construction >>Economy type with excellent practicality and cost performance General concrete, hard concrete, mortar, blocks, hume pipes, U-shaped grooves, etc.
- GOEI SEISAKUSYO Dust collection cover Little job cut (for both Φ105 and Φ125)Can be attached to grinders from major manufacturers! Φ105, Φ125 Cutter combined corner remaining industry minimum 20mm Compatible with dust collector hose diameters Φ32 and Φ38!Mass (g) 260 Trusco Part No. 828-7452 Material Aluminum die-cast
- Sumflex Diamond cutterUsed for cutting glass, shells, tiles, stones, etc.Thickness (mm) 0.6 Suitable Material Glass, shells, tiles, stones, etc. Allowable Rotation Speed (min -1 [rpm]) 10000 Shank Diameter (Φmm) 2.34 Material Diamond
- LOBSTER (LOBTEX) Diamond civil engineering blades (for both wet and asphalt / concrete)Hole Diameter (Φmm) 27 Dimension H (Φmm) 27 Dimension W (mm) 7 Suitable Material Asphalt / concrete
- Asahi Diamond Industrial Blue 《Offset》Corner cutting cutter with a protective cover attached to the flange to improve safety Granite in general, concrete, roof tiles
- RELIEF Electroplated diamond cutterYou can cut FRP and PVC pipes. For cutting resin materials, FRP, porcelain tiles, marble, etc.Hole Diameter (Φmm) 20 (when using bushing: 15) Tip Width (mm) 5 Maximum Operating Speed (min -1 [rpm]) 15000 Blade Thickness (mm) 1.8 Specification Dry type Outer Diameter (Φmm) 97
- Tsuboman Tile joint cutterEasy to handle because it has a small diameter and a shaft. Even complicated joints are OK. Cut only the joints without damaging the tiles. * Please be sure to read the instruction manual. * Please use a protective cover and safety glasses.Shaft Length (mm) 70 RoHS directive (corresponding to 10 substances) Correspondence Specification Dry type Suitable Material tile
- MOTOYUKI Global saw universal blade Welded diamond bladeUses high-strength, high-quality diamond abrasive grains. The sharpness is maintained by the protruding diamond abrasive grains. For cutting various materials. * Metals larger than 1 mm (iron, stainless steel, etc.) cannot be cut.Outer Diameter (Φmm) 105 Maximum Rotation Speed (min-1[rpm]) 14500 Ring Size (mm) 15 Diamond Layer Thickness (mm) 2.2 Hole Diameter (Φmm) 20 Inch display 4 Diamond Layer Width (mm) 5.0 Trusco Part No. 803-6665 Suitable Model Disc grinder, cutter Specification Dry typefrom S$35.99Min. 2 days
- Tsuboman YosaburoA crisp sharpness and a supple feel. Concrete, reinforced concrete, hard porcelain tile, ceramic refractory, stone, etc.Specification Dry type
- IWOOD Diamond cutter NEW for tiles and tilesOuter Diameter (Φmm) 105 Hole Diameter (Φmm) 20
- BOSCH Carbide cutting blade (titanium coating)Suitable for For PTC470, PTC640