Wheel Brushes
A wheel brush is a brush that can be used by setting it on an electric tool or air tool, and polishing fixed objects by rotating the brush. It is often used in product factories and processing industries, and is used for deburring, polishing the surface, and peeling paint. Since it is a brush used by setting it on a tool, it is possible to easily do repetitive work. There are various types of brushes that use metal materials such as copper wire, brass, and stainless steel, and brushes that use plant fibers or nylon fibers.
Other Related Pages
MonotaRO Wheel brush steel wireIt is effective for removing paint, removing rust, and removing burrs. For removing paint, removing rust, and removing burrs. * Please wear protective goggles, protective mask, and protective clothing before use.Wire Diameter Φ(mm) 0.3 Thickness (mm) 20- SUN POWER Steel Wire Wheel BrushFor brush work, it is effective to scrape with the tip of the brush wire. Rust removal polishing, base polishing of plating coating, finish polishing of peeling and welding parts of paint, deburring such as press cutting, cleaning finish of castings, rubber products, etc. * Be sure to wear safety... Read MoreWire Diameter Φ(mm) 0.3 Suitable Material Casting, rubber, etc. Suitable for Electric / pneumatic tool grinder Type Wheel brush
- TRUSCO Adjust pin wrenchSince the pin width is variable from 10 to 30 mm, the lot nuts of each company can be attached and detached with one. Detachment of lock nutRange to Use (mm) 10～30 Mass (g) 148 Trusco Part No. 232-5705
- SUN POWER Brass Wheel Brush* Be sure to wear safety glasses and protective equipment when working.Wire Diameter Φ(mm) 0.15 Suitable for Electric / pneumatic tool grinder Type Wheel brush
- Narutoya Steel wire saw blade wheel brushUses a wire diameter suitable for removing chips adhering to the blade groove of band saws, contours, and portable machine saws. Scrape off chips adhering to the galette of the blade.Maximum Operating Speed (min -1 [rpm]) 3000 Hole Diameter (mm) 6.5 Inner Diameter (Φmm) 6.5 Outer Diameter (mm) 80from S$13.99Min. 2 days
- Narutoya Steel wire gold wheel brushGenerally, 0.3 mm wire (steel wire) is used, but we focused on the wire material and used yellow stranded wire (brass plated wire), which is hard to break, stable forever, and further improved the polishing power.
- SUN POWER Sus304 Stainless Wheel Brush* Be sure to wear safety glasses and protective equipment when working.Wire Diameter Φ(mm) 0.3 Suitable for Electric / pneumatic tool grinder Type Wheel brush
- BURRTEC Weiler high speed rotating powerful brushHT carbon steel (high-strength heat-treated copper wire) specifications Long life Perfect balance Compatible with 100mm grinders from various companies (Hitachi, Makita, Toshiba, Shinko, Mitsubishi, Ryobi, Mitachi, high speed, etc.) Cleaning of tanks and drums for shipbuilding and bridges Cleanin... Read MoreThread Pitch 1.5 Thread Diameter (mm) 10 Outer Diameter (Φmm) 102 Screw diameter (M × P) 10×1.5 Maximum Rotation Speed (min-1[rpm]) 20000
- SUN POWER Steel wire press wheel brushWire Diameter Φ(mm) 0.3 Thickness (mm) 13 Suitable for Electric / pneumatic tool grinder Type Press wheel brush (for internal use)
- SUN POWER Steel wire plated wire wheel brush* Be sure to wear safety glasses and protective equipment when working.Suitable for Electric / pneumatic tool grinder Type Wheel brush
- TRUSCO Foil brushThe brush shape is disk-shaped, and hairs are planted radially toward the outer surface. It can be installed if there is a 10 mm hole in the center of the disk-shaped brush and the tool, machine, etc. has a shaft of the same diameter. Deburring, polishing, cleaning, etc. of metal surfaces.Wire diameter (mm) 0.3 Hole Diameter (mm) 10 Inner Diameter (Φmm) 10 Thickness (mm) 12 Maximum Operating Speed (min -1 [rpm]) 3000 Material Steel wire
- SUN POWER Quick stainless wheel brushIt is widely used for shipbuilding, vehicles, and bridges, and is suitable for removing rust in narrow spaces and polishing before painting. * Be sure to wear safety glasses and protective equipment when working.Wire Diameter Φ(mm) 0.30 Thickness (mm) 13 Shaft Length (mm) 27 Hex Width Across (mm) 6.35 Type Quick brush Material Stainless steel Material (Brush Part) Stainless steel wire (SUS304)
-
-
- TRUSCO Foil Brush (0.3 Stainless Steel Wire)The brush shape is disk-shaped, and hairs are planted radially toward the outer surface. It can be installed if there is a 10 mm hole in the center of the disk-shaped brush and the tool, machine, etc. has a shaft of the same diameter. Deburring, polishing, cleaning, etc. of metal surfaces.Wire diameter (mm) 0.3 Inner Diameter (Φmm) 10 Hole Diameter (mm) 10 Thickness (mm) 12 Maximum Operating Speed (min -1 [rpm]) 3000from S$18.99Min. 2 days
- TRUSCO Foil brush (0.15 brass wire)The brush shape is disk-shaped, and hairs are planted radially toward the outer surface. It can be installed if there is a 10 mm hole in the center of the disk-shaped brush and the tool, machine, etc. has a shaft of the same diameter. Deburring, polishing, cleaning, etc. of metal surfaces.Wire diameter (mm) 0.15 Inner Diameter (Φmm) 10 Hole Diameter (mm) 10 Thickness (mm) 12 Maximum Operating Speed (min -1 [rpm]) 3000 Material Brassfrom S$19.99Min. 2 days
- BURRTEC ROBO foil brush SW0. 35 WA-200 16/25 holeStable quality Standard type with reliable and proven results in grinding, polishing, deburring, and cleaning work. Flush removal of plastic parts, appearance finish of aluminum / copper / brass / stainless steel products, rust removal of pipes / steel materials, deburring of gears / cast iron pr... Read MoreWire diameter (mm) 0.35 Inner Diameter (Φmm) 16/25 Thickness (mm) 19 Outer Diameter (Φmm) 200 Maximum Rotation Speed (min-1[rpm]) 4500 Bristle Length (mm) 55 Trusco Part No. 805-1553 Material (Brush Part) Steel wire
- SUN POWER Brass Press Wheel Brush* Be sure to wear safety glasses and protective equipment when working.Wire Diameter Φ(mm) 0.15 Hole Diameter (Φmm) 10 Thickness (mm) 13 Suitable for Electric / pneumatic tool grinder Type Press wheel brush (for internal use)from S$16.99Min. 2 days
- SUN POWER Quick Brass Wheel BrushIt is widely used for shipbuilding, vehicles, and bridges, and is suitable for removing rust in narrow spaces and polishing before painting. * Be sure to wear safety glasses and protective equipment when working.Wire Diameter Φ(mm) 0.15 Thickness (mm) 13 Shaft Length (mm) 27 Hex Width Across (mm) 6.35 Material (Brush Part) Brass (BS) Type Quick brushfrom S$14.99Min. 2 days
- Sumflex Foil wire 75Φ (steel wire)A wire brush that is attached to a rotating tool for grinding and polishing. Used for paint peeling, rust removal, deburring, etc. * Extreme pressurization increases breakage and reduces work efficiency.Wire diameter (mm) 0.3 Thickness (mm) 10 Hole Diameter (mm) 12.7 Inner Diameter (Φmm) 12.7 Allowable Rotation Speed (min -1 [rpm]) 7000 Outer Diameter (mm) 75 Material Steel wire Shape Wheel typefrom S$11.99Min. 2 days
-
- Futaba Brush (FBK) Wheel brush PP wirePP corrugated wire Φ0.3 (polypropylene) is used for the brush material. It has high solvent resistance and is not easily scratched against polished objects. For deburring, cleaning and maintenance of soft polished materials, surface polishing and cleaning of iron plates, etc. * When using the met... Read MoreWire Diameter Φ(mm) 0.3 Hole Diameter (Φmm) 10 Maximum Rotation Speed (min-1[rpm]) 3600 RoHS directive (corresponding to 10 substances) Correspondencefrom S$36.99Min. 2 days
- YANASE Octopus brush steel wireSteel wire rope (SW) is used for the wire. Resin processing is applied to each wire to prevent it from fraying. Ten wires of wire rope 3Φ (0.3, 49) are planted in one block, which reduces the number of breaks and jumps like conventional brushes, has elasticity as a whole, and does not cause fatig... Read MoreWire diameter (mm) 0.3 Thread Pitch 1.5 Thread Diameter (mm) 10 Outer Diameter (mm) 100 Maximum Operating Speed (min -1 [rpm]) 12000 Mass (g) 175 Trusco Part No. 332-2777 RoHS directive (corresponding to 10 substances) Correspondence Thread Size M10
- TRUSCO Foil brushThe brush shape is disk-shaped, and hairs are planted radially toward the outer surface. It can be installed if there is a hole in the center of the disk-shaped brush and the tool, machine, etc. has a shaft of the same diameter. Polishing of metal surface, rust removal, deburring, paint peeling.2018 Trusco page 5 1367from S$58.99Min. 2 days
- Narutoya Stainless wheel brushIt is resistant to acids and alkalis, is safe up to 850 ° C for high temperature oxidation, and has excellent high temperature strength.Wire diameter (mm) 0.30 Material Stainless steelfrom S$88.99Min. 2 days
-
- YANASE Wheel brush, abrasive-free UnilonMade of elastic nylon material with excellent abrasion resistance. No abrasive grains are applied to the nylon material, so no scratches remain on the surface.Type Abrasive-free Unilon Φ0.5from S$26.99Min. 2 days
- Osborn Industrial brush Colfil E-ring lockA material in which silicon carbide abrasive grains are embedded in nylon filament. Since the absorption rate is low, wit polishing can be performed in the same way as dry polishing. Deburring, surface treatment, micro deburring of hydraulic parts, etc. * Please use protective glasses and a dust ... Read MoreWire diameter (mm) - Shaft Length (mm) 30 Shank Diameter (Φmm) 6 Bracket width (mm) 7from S$35.99Min. 2 days
- Futaba Brush (FBK) Wheel Brush Brass WireBrass corrugated wire Φ0.15 (thin wire) is used for the brush material. Brushing is possible with softer hair than steel wire or stainless steel wire. Polishing, deburring, cleaning and maintenance of brass and copper products. For graining wood products * When using the metal wire of the wire br... Read MoreWire Diameter Φ(mm) 0.15 Maximum Rotation Speed (min-1[rpm]) 3600 Suitable Material Brass, copper, woodworking, etc. RoHS directive (corresponding to 10 substances) Correspondencefrom S$27.99Min. 5 days
- BURRTEC ROBO foil brush SW0.3 WA-100 13/10 holeWire diameter (mm) 0.3 Inner Diameter (Φmm) 10/13 Outer Diameter (Φmm) 100 Thickness (mm) 16 Bristle Length (mm) 23 Trusco Part No. 805-1550 Maximum Rotation Speed (min-1[rpm]) 9000 Material (Brush Part) Steel wirefrom S$32.99Min. 2 days
- Futaba Brush (FBK) Wheel Brush Steel WireHard steel wire (# 60 carbon wire is cold-stretched to increase hardness) is used for the brush material. It has moderate springiness and is widely used in general. For removing rust on metal products, polishing the base of plating coating, deburring, cleaning and maintenance, peeling paint, grai... Read MoreWire Diameter Φ(mm) 0.3 Maximum Rotation Speed (min-1[rpm]) 3600 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Metal, woodwork, etc.from S$12.99Min. 5 days
-
- SUN POWER SUS304 Stainless press wheel brushWire Diameter Φ(mm) 0.3 Hole Diameter (Φmm) 10 Thickness (mm) 13 Suitable for Electric / pneumatic tool grinder Type Press wheel brush (for internal use)from S$16.99Min. 5 days
- BOSCH Carbon steel brushA pack of 2 deals. Dirt removal / polishingShank (mm) 3.2from S$9.89Min. 2 days
-
- Futaba Brush (FBK) Wheel brushUses iron wave wire Φ0.15 (fine soft wire) for the brush material. Brushing is possible with softer hair than steel wire or stainless steel wire. For removing rust from soft metal products, polishing the base of plating coating, deburring, cleaning and maintenance, peeling paint, graining wood pr... Read MoreWire Diameter Φ(mm) 0.15 Hole Diameter (Φmm) 10 Maximum Rotation Speed (min-1[rpm]) 3600 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Metal, woodwork, etc.from S$19.99Min. 6 days
- LESSMANN Wheel brushIt is a knot (twist) processed product using high-quality wire, and is a long-life product with excellent high grinding power and sharpening power. It is especially suitable for sites where high grindability is required. For sites such as welding, steel, and shipbuilding. For polishing steel and ... Read MoreThread Size M10(P1.5) Overall Length (mm) 20 Maximum Operating Speed (min -1 [rpm]) 12500from S$38.99Min. 2 days
-
- OFFICE MINE B cross wheel for roller minicoAbrasive Grain Size #500～#600 Trusco Part No. 156-9171 Mass (g) 75from S$97.99Min. 2 days
- Futaba Brush (FBK) Steel wire for wheel brush saw bladeHard steel wire (# 60 carbon wire is cold-stretched to increase hardness) is used for the brush material. It has moderate springiness and a large hammer effect. It is a maintenance part used to remove chips and prevent biting from the saw blade of band saws and contour machines. * When using the ... Read MoreMaximum Rotation Speed (min-1[rpm]) 3600 Hole Diameter (Φmm) 6.5 Outer Diameter (Φmm) 80 RoHS directive (corresponding to 10 substances) Correspondence
