Cup Brushes
A cup brush is an abrasive that polishes the surface of an object to be polished while it is attached to an electric or pneumatic tool and rotated. A circular cup shape is formed overall, and a brush is provided on the entire inner side along the outer peripheral edge. Ideal for rust removal, deburring, slug scale removal, paint stripping, finishing after welding, etc. Brush wires include stainless steel, wire, and brass to accommodate a variety of workpieces. The power tool used can be a general-purpose handy electric disc grinder. The brush can be easily removed using a general-purpose spanner.
Other Related Pages
TRUSCO Cup brush for pneumatic toolsSince the brush is not a grinding material like a grindstone or a coating abrasive, it does not scrape the product itself and is ideal for removing dirt and deposits on the surface. Removes rust and removes oxide film after welding. Paint peeling and base treatment.Suitable Diameter (Φmm) (Grinder whetstone) 100 Maximum Operating Speed (min -1 [rpm]) 12000 Hole Diameter (Φmm) 16 Mass (g) 270 Outer Diameter (Φmm) 75from S$23.99Min. 2 days- MonotaRO Hineri Cup BrushA tough twist type cup brush for power tools 100 mm. For steel *Do not use for anything other than its intended purpose. *Worn wires may scatter together with polishing scraps (burrs, welding scum, etc.). *Be sure to use safety protective equipment (glasses, mask, gloves, etc.) during work. *Plea... Read MoreWire Diameter Φ(mm) 0.5 Thread Pitch 1.5 Thread Diameter (mm) 10 Maximum Rotation Speed (min-1[rpm]) 12500 Bristle Length (mm) 20 Metal Part Diameter (mm) 60 Outer Diameter (Φmm) 75 Overall Height (mm) About 45 Thread Size M10×P1.5 Suitable Material Steel Material Steel wire
- TRUSCO Cup brush for electric toolsEffective for deburring, removing rust, and removing paint. Ideal for deburring minute burrs after cutting and grinding. Anti-corrosion of steel and non-ferrous metals, polishing, deburring of welding, peeling of paint, polishing of base, edge finishing of rubber manufacturing process, surface fi... Read MoreMaterial Brass plated steel wire Suitable Material Steel, non-ferrous metal, rubber, etc.
- MonotaRO Cup brush stainless*Do not use for anything other than its intended purpose. *Worn wires may scatter together with polishing scraps (burrs, welding scum, etc.). *Be sure to use safety protective equipment (glasses, mask, gloves, etc.) during work. *Please use at the maximum operating speed or less. * Perform a test... Read MoreMass (kg) 0.183 Wire Rope Diameter (Φmm) 0.3 Wire Diameter Φ(mm) 0.3 Thread Pitch 1.5 Thread Diameter (mm) 10 Maximum Operating Speed (min -1 [rpm]) 12500 Outer Diameter (Φmm) 75 Material SUS304
- Osborn Cup brushSteel wire knot Schmil cup brush (tough twist type) for power tools 100 mm. The larger the outer diameter, the more efficient the brush. For portable tools, use 180 mm or less. The shorter the trim length, the harder the brush and the better the cutting. The longer the trim, the more flexible it ... Read MoreWire Diameter Φ(mm) 0.35 Thread Pitch 1.5 Thread Diameter (mm) 10 Wheel Diameter (Φmm) 100 Rotational Speed (min -1 [rpm]) 11000 (Maximum safe number) Maximum Rotation Speed (min-1[rpm]) 12500 Bristle Length (mm) 20 Trimming Length (m/m) 20 Mass (g) 265 Metal Part Diameter (mm) 60 Outer Diameter (Φmm) 65 Thread Size M10×P1.5
- SUN POWER Steel wire plated wire cup brushType Cup brush for electric tools Suitable Material General steel Material Steel Other With liability insurance
-
- MonotaRO Brass cup brushCompared to hard steel wire and stainless steel wire, the polishing power is lower, but the waist is soft and the brass wire is soft. Polishing brass and copper products, removing rust, deburring, paint peeling, etc. *Do not use for anything other than its intended purpose. *Worn wires may scatte... Read MoreWire Diameter Φ(mm) 0.3 Thread Pitch (mm) 1.5 Thread Diameter (mm) 10 Maximum Operating Speed (min -1 [rpm]) 12500 Bristle Length (mm) 20 Outer Diameter (Φmm) 75 Material Brass wavy line Suitable Material Brass, copper, etc. Thread Size M10
- Amagasa Thrust brushIf the brush part is worn, you can cut a part of the cup to get new hair tips. An economic type that lasts a long time and is not wasteful.Thread Pitch 1.5 Thread Diameter (mm) 10 Specification For power tools Connection Size M10
- SUN POWER SUS304 Stainless Steel Cup BrushType Cup brush for electric tools Other With liability insurance
- Nishiki Engrit mini cup brush (for electric tools) EN-110No seizure on stainless steel. The amount of wear (amount of wear + amount of breakage) is greatly reduced. Reliably captures work surfaces of all shapes. Polishing and grinding can be done at the same time without damaging the base material. It has excellent workability and durability, and has e... Read MoreThread Pitch 1.5 Thread Diameter (mm) 10 Maximum Rotation Speed (min-1[rpm]) 12800 Bristle Length (mm) 22 Outer Diameter (Φmm) 95 Material Abrasive nylon RoHS directive (corresponding to 10 substances) Correspondence Thread Size M10×P1.5 Suitable Material Stainless steel, aluminum, etc.
- Sumflex Hex axis cup wire brush brass wireThe cup shape is suitable for work on wide surfaces and R surfaces. Brass wire has a soft and soft polishing power. Used for paint peeling, rust removal, deburring, etc. * Extreme pressurization increases breakage and reduces work efficiency.Recommended Operating Speed (min-1 [rpm]) 2000 Allowable Rotation Speed (min -1 [rpm]) 4500 Wire Diameter Φ(mm) 0.15 Wire rod (mm) Brass wire Shaft Length (mm) 35 Axis Hex axis (6.35mm across flats)
- Sumflex Disc cup wireA wire brush that is attached to a disc grinder for grinding and polishing. Used for rust removal, paint removal, and deburring. * Dustproof glasses are essential as they will always break off.Thread Pitch 1.5 Thread Diameter (mm) 10 Allowable Rotation Speed (min -1 [rpm]) 13000 Shape Disc cup type
- Sumflex Hex shaft cup wire brush stainless steel wireThe cup shape is suitable for work on wide surfaces and R surfaces. Stainless wire is suitable for polishing areas where rust is disliked. Another feature is that there are few breaks. Used for paint peeling, rust removal, deburring, etc. * Extreme pressurization increases breakage and reduces wo... Read MoreAllowable Rotation Speed (min -1 [rpm]) 4500 Recommended Operating Speed (min-1 [rpm]) 2000 Wire rod (mm) Stainless wire Wire Diameter Φ(mm) 0.3 Axis Hex axis (6.35mm across flats) Shaft Length (mm) 35from S$21.99Min. 2 days
- GOKURYU Hineri BrushFlat surface polishing cup brush for disc grinders. The wire of the brush has a twisted shape that is strongly twisted with a machine made in Germany, and has grinding power and durability, making it suitable for strong polishing. The strong twist reduces the breakage of the steel wire and enable... Read MoreMaximum Operating Speed (min -1 [rpm]) 12500 Outer Diameter (Φmm) 80 Material Steel wire Screw diameter (M × P) M10×P1.5 Diameter x height (mm) About 75 × 55 Wire diameter (mm) 0.5 Mass (g) About 340
- Sumflex Hex axis cup wire brush steel wireThe cup shape is suitable for work on wide surfaces and R surfaces. Used for paint peeling, rust removal, deburring, etc. * Extreme pressurization increases breakage and reduces work efficiency.Material (Brush Part) Steel wire Recommended Operating Speed (min-1 [rpm]) 2000 Allowable Rotation Speed (min -1 [rpm]) 4500 Wire Diameter Φ(mm) 0.3 Specification Hex axis (6.35mm across flats) Shaft Length (mm) 35
- ESCO 75mm cup type wire brushIdeal for heavy grinding such as cutting burrs and concrete peeling.Material (Brush) Steel / oil tempered wire Wire Diameter Φ(mm) 0.51 Thread Pitch 1.5 Thread Diameter (mm) 10 Maximum Rotation Speed (min -1 [rpm]) 12000 Bristle Length (mm) 25 Outer Diameter (Φmm) 75 Esco Part No. EA809-22 Screw size M10×1.5
- TRUSCO Cup brush stainless steel for electric toolsEffective for deburring, removing rust, and removing paint. Ideal for deburring minute burrs after cutting and grinding. For rust prevention and polishing of steel and non-ferrous metals, deburring of welding, peeling of paint, polishing of base, edge finishing of rubber manufacturing process, su... Read MoreWire Diameter Φ(mm) 0.3 Thread Pitch 1.5 Thread Diameter (mm) 10 Maximum Operating Speed (min -1 [rpm]) 12000 Trusco Part No. 124-7638 Mass (g) 310 Metal Part Diameter (mm) 71 Outer Diameter (Φmm) 75 Thread Size M10×P1.5 Material SUS Suitable Material Steel, non-ferrous metal, rubber, etc.
- YANASE Steel wire cup brush E typeWire Diameter Φ(mm) 0.3 Thread Pitch 1.5 Thread Diameter (mm) 10 Maximum Rotation Speed (min-1[rpm]) 12000 Bristle Length (mm) 20 Metal Part Diameter (mm) 60 Outer Diameter (Φmm) 75 RoHS directive (corresponding to 10 substances) Correspondence Thread Size M10×P1.5
- YANASE Steel wire plated cup brush E typeA brass-plated hard steel wire for polishing and cleaning general metals such as iron with high grinding power and low wire breakage rate.Wire Diameter Φ(mm) 0.22 Thread Pitch 1.5 Thread Diameter (mm) 10 Maximum Rotation Speed (min-1[rpm]) 12300 Bristle Length (mm) 20 Metal Part Diameter (mm) 60 Outer Diameter (Φmm) 75 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Iron etc. Thread Size M10×P1.5 Material (Wire Part) Steel wire brass plating Material Steel wire brass plating
- SUN POWER Brass cup brushWire Diameter Φ(mm) 0.30 Thread Pitch 1.5 Thread Diameter (mm) 10 Wheel Diameter (Φmm) 100 Maximum Rotation Speed (min-1[rpm]) 12000 Material Brass wavy line Material (Wire Part) Brass wavy line Suitable Material Brass, wood Type For electric and pneumatic tool grinder Hole Diameter (Φmm) M10×P1.5 Other With liability insurance
- SUN POWER Steel wire cup brushType Cup brush for electric tools Suitable Material General steel Material Steel Other With liability insurance
- TRUSCO Cup brush for power tools (abrasive nylon)Compared to metal wire brushes, the wire is less scattered and safety is emphasized. Compared to conventional nylon wire with abrasive grains, it uses bristle material that is less likely to seize on the workpiece due to wear heat. Compared to the brush of, the weight is reduced, so workability i... Read MoreAbrasive Grain #80 Wire Diameter Φ(mm) 1.2 Thread Pitch 1.5 Thread Diameter (mm) 10 Maximum Operating Speed (min -1 [rpm]) 12000 Mass (g) 162 Trusco Part No. 480-5666 Outer Diameter (Φmm) 75 Material of Bristle Abrasive-filled nylon wire # 80 Thread Size M10(P1.5) Material Nylon wire with abrasive grains
- Nishiki Cup brush TN typeImproved safety and workability by significantly reducing wire breakage Ideal for polishing and grindingWire Diameter Φ(mm) 0.50 Maximum Rotation Speed (min-1[rpm]) 12000 Material Hard steel wire Type Steel Hineri wire
- SUN POWER SUS304 Stainless Steel Cup BrushWire Diameter Φ(mm) 0.5 Type Cup brush for electric tools Material Stainless steel Other With liability insurancefrom S$63.99Min. 2 days
- BURRTEC Weiler high speed rotating powerful brushHT carbon steel (high-strength heat-treated copper wire) specifications Long life perfect balance Cleaning tanks and drums for shipbuilding, bridges, etc. Cleaning before and after welding Vehicle cleaning Remove rust on various metals Paint peeling Injection molding machine Screw shaft cleaning ... Read MoreMaximum Rotation Speed (min-1[rpm]) 14000 Outer Diameter (Φmm) 70
- ESCO 75mm / M10 wire brush (cup type / steel twist)Esco Part No. EA809YS-1
- PROXXON Wire brush cup typeIron, non-ferrous metal polishing, rust removalShaft Diameter (Φmm) 2.35 RoHS directive (corresponding to 10 substances) Correspondencefrom S$18.99Min. 2 days
- Nishiki Engrit cup brush (for electric tools) EN-010No seizure on stainless steel. The amount of wear (amount of wear + amount of breakage) is greatly reduced. Reliably captures work surfaces of all shapes. Polishing and grinding can be done at the same time without damaging the base material. It has excellent workability and durability, and has e... Read MoreThread Pitch 1.5 Thread Diameter (mm) 10 Outer Diameter (Φmm) 125 Maximum Rotation Speed (min-1[rpm]) 12800 Bristle Length (mm) 25 Material Abrasive nylon RoHS directive (corresponding to 10 substances) Correspondence Thread Size M10×P1.5 Suitable Material Stainless steel, aluminum, etc.
- Nishiki Cup brush AN typeImproved safety and workability by significantly reducing wire breakage Ideal for polishing and grindingWire Diameter Φ(mm) 0.27 Maximum Rotation Speed (min-1[rpm]) 12000 Material Hard steel wire twisted type Type Steel twisted wirefrom S$19.99Min. 2 days
- SUN POWER Steel wire plated wire cup brushWire Diameter Φ(mm) 0.25 Type Cup brush for pneumatic tools Material Steel Other With liability insurancefrom S$14.99Min. 2 days
- SUN POWER Steel Wire Hinelli Cup BrushWire Diameter Φ(mm) 0.5 Type Cup brush for pneumatic tools Material Steel Other With liability insurancefrom S$32.99Min. 2 days
- MITACHI MP grid brush grain size # 46The grid wire is both a safe chemical fiber wire and a steel wire with strong grinding force, and the grid placed on the entire surface of the grid does not damage the work surface. By increasing the heat resistance, the problem of welding due to abrasion heat has also been solved. The grid lines... Read MoreTrusco Part No. 791-9191 Outer Diameter (Φmm) 95 Mass (g) 156 Thread Size M10(P1.5) Material of Bristle N-GRIT line Wire Diameter Φ(mm) 1.9 Maximum Operating Speed (min -1 [rpm]) 5000～8000 Thread Gauge 46
- Nishiki Cup brush AH typeImproved safety and workability by significantly reducing wire breakage Ideal for polishing and grinding * If you are using a power tool, please let us know.Wire Diameter Φ(mm) 0.27 Maximum Rotation Speed (min-1[rpm]) 12000 Material Hard steel wire twisted type Type Steel twisted wirefrom S$21.99Min. 2 days
- TRUSCO Spanner for cup wireSince the mouth has a stepped shape, one can handle two sizes (17/22 mm). Detachment of cup brush / bevel brush.Size 22mm/17mm Material / Finish High carbon steel / chrome plating Mass (g) 114 Trusco Part No. 232-5721 Specification With grip.
- YANASE Uni long lit cup brushIt has excellent wear resistance, and has moderate hair stiffness and flexion recovery. Can withstand continuous use for a long time. Since nylon with abrasive grains (# 180) is used, it is suitable for deburring metal and wood, and removing rust and paint.Maximum rotation speed Nmax (min -1 [rpm]) 12000 RoHS directive (corresponding to 10 substances) Correspondence Wire Diameter Φ(mm) Grit # 180 Φ0.7
- MITACHI MP grid brush grain size # 60The grid wire is both a safe chemical fiber wire and a steel wire with strong grinding force, and the grid placed on the entire surface of the grid does not damage the work surface. By increasing the heat resistance, the problem of welding due to abrasion heat has also been solved. The grid lines... Read MoreMaterial of Bristle N-GRIT line Maximum Operating Speed (min -1 [rpm]) 5000～8000 Outer Diameter (Φmm) 95 Mass (g) 156 Thread Gauge 60 Trusco Part No. 791-9166 Wire Diameter Φ(mm) 1.3 Thread Size M10(P1.5)
- Nishiki Engrit mini cup brush (for air tools) EH-116No seizure on stainless steel. The amount of wear (amount of wear + amount of breakage) is greatly reduced. Reliably captures work surfaces of all shapes. Polishing and grinding can be done at the same time without damaging the base material. It has excellent workability and durability, and has e... Read MoreMaximum Rotation Speed (min-1[rpm]) 12800 Hole Diameter (Φmm) 16 Bristle Length (mm) 22 Outer Diameter (Φmm) 95 Material Abrasive nylon Suitable Material Stainless steel, aluminum, etc.
- TRUSCO Cup brush brassSince it is cup-shaped, it is suitable for work on a relatively wide surface. Polishing of metal surface, rust removal, deburring, paint peeling, etc.Wire Diameter Φ(mm) 0.15 Bristle Length (mm) 25 Maximum Operating Speed (min -1 [rpm]) 3000 Shaft Length (mm) 35 Shank Diameter (Φmm) 6 (round shaft) Material Brass Suitable Material Metalfrom S$21.99Min. 2 days
- Nishiki Super cup SN typeImproved safety and workability by significantly reducing wire breakage Ideal for polishing and grindingMaximum Rotation Speed (min-1[rpm]) 12000from S$32.99Min. 2 days
