Mounted Points & Abrasives
Polishing with a shaft is mainly used for grinding and polishing metal, and is suitable for internal grinding and workpieces with small processing parts. There are many types of bonds, including rotary bars, grinding wheels with shafts, brushes with shafts, and flap wheels. The rotary bar is characterized by a large amount of cutting and demonstrates its strength in deburring and contour cutting. Grinding wheels with shafts are suitable for shape adjustment and chamfering, and the hardness and grain size of grinding wheels can be distinguished by color. Shaft brushes are widely used for rust removal and internal polishing.
Other Related Pages
MonotaRO Wheel Wire Brush with ShaftSince it is wheel-shaped, it is convenient for work in narrow areas such as grooves. For rust removal work. For deburring work. * Be sure to use safety protective equipment (glasses, mask, gloves, etc.) during work. * Please use at the maximum rotation speed or less. * Since it is a wire processe... Read MoreThickness (mm) 12 Maximum Operating Speed (min -1 [rpm]) 20000 Shaft Length (mm) 30 Shank Diameter (Φmm) 6- MonotaRO Electroplated Diamond BarExcellent grinding power due to the large amount of abrasive grains protruding. Suitable for rough machining, small diameter hole drilling, and grinding finish machining of dies and jigs. Ideal for non-ferrous metals such as cemented carbide, ceramics, stones, glass, rubber, silicon, plastics, FR... Read MoreShank Diameter (Φmm) 3 Overall Length (mm) 45
- FSK A Shaft Whetstone Black ACompared to Vitrified Bond, it hits the work softly during work and is easy to use. Rough grinding, deburring, etc.Abrasive Grain Size 36 Shape A Abrasive Grain A (black) Suitable Material General steel, casting, stainless steel Bonding Strength P Binder Resinoid
- Daiwa Kasei Daiwa Rabin with shaft CM type WA120 (blue)Beautiful finish like never before! "Shave a little and polish a lot" It fits very well on the work piece and provides a smooth and glossy finished surface without clogging or clogging. Achieves significant labor saving and efficiency improvement of work! "Can cover 2 processes fro... Read MoreShape Straight type (A) Abrasive Grain WA120 (blue)
- Daiwa Kasei Daiwa Rabin with shaft CM type WA220 (green)Beautiful finish like never before! "Shave a little and polish a lot" It fits very well on the work piece and provides a smooth and glossy finished surface without clogging or clogging. Achieves significant labor saving and efficiency improvement of work! "Can cover 2 processes fro... Read MoreShape Straight type (A) Abrasive Grain WA220 (green)
- YANASE Electroplated diamond bar setIt's a great deal with lots of it! A beautiful package that makes it easy to see and select the contents! Glass engraving, pottery, metal engraving, silver accessory processing, name entryShank Diameter (Φmm) 2.35 RoHS directive (corresponding to 10 substances) Correspondence Shaft Diameter Shank diameter Φ2.35mm
- ESCO Whetstone with shaftAbrasive Grain Size #120 Shank Diameter (Φmm) 2.35 Overall Length (mm) 38～47
- ESCO 32x32mm [blue] 6mm whetstone with shaftAbrasive Grain Size #36 Maximum Rotation Speed (min -1 [rpm]) 19000 Thickness (mm) 32 Diameter (Φmm) 32 Shank Diameter (Φmm) 6 Abrasive Grain A Shape Cylindrical type Esco Part No. EA819HC-12
- EARTH MAN Grinding wheel with hexagonal shaft for metalMetal processing, deburring, polishing of cutting tools For metals (adaptive material: iron / light metal)Shank Diameter (Φmm) (Hex) 6.35 Maximum Operating Speed (min -1 [rpm]) 5000 Suitable Tool Impact driver, electric screwdriver Suitable Material Iron and light metals Abrasive WA Abrasive Grain Size WA60
- Sumflex Set of 5 whetstones with shaft for metalA set of grindstones that are attached to rotary tools for grinding.Shank Diameter (Φmm) 6
- TRUSCO Grinding wheel with high durability rubber shaft (# 400)By increasing the ceramic content compared to conventional products, the polishing performance is excellent and the durability is tripled. Finished surface accuracy is improved. Since ceramic powder and alumina oxide raw material are sintered on natural rubber, there is little loss of abrasive gr... Read MoreShank Diameter (Φmm) 3 Shaft Length (mm) 30 Abrasive Grain Size 400 Shape Cylindrical type Material (Shaft) Stainless steel (SUS430)
- PROXXON Set of 2 whetstones with shaftGrinding and polishing of iron, aluminum, brass, etc.Material WA whetstone 150 Shaft Diameter (Φmm) 2.35from S$14.99Min. 2 days
- SK (Niigata Seiki) Diamond InternalA whetstone with a shaft in which diamond abrasive grains are electrodeposited internally. For precision processing of cemented carbide, glass products, accessories, etc., finishing of dies, etc.Material (Shank) Carbon tool steel (SK) Type of Abrasive Grain Diamond # 200 Rotation Speed (min-1[rpm]) Proper / 10000
- Takashiba Gimune Mfg. Hexagonal Diamond Sharpener[Easy versatile polishing from professionals to hobbies!] One-touch mounting for impact! Easy and convenient polishing and blade sharpening! Since it is a hexagonal shaft, it can be attached to the impact for quick polishing and blade sharpening on site! The material is industrial diamond # 400. ... Read MoreAbrasive Grain Size Both sides # 400
- Sumflex Cera Point (for Metal)A rubber grindstone that has both cutting and polishing properties, combining a specially treated ceramic filler and a uniquely developed elastic rubber. (Manufacturing method patent) A whetstone whose main purpose is polishing. For surface adjustment of various metals, fine deburring, thread cha... Read MoreMaximum Operating Speed (min -1 [rpm]) 15000 Allowable Rotation Speed (min -1 [rpm]) 15000 Outer Diameter x Length L (Φmm x mm) 20×25 Shank Diameter (Φmm) 6 Material Elastic ceramic grinding wheel
- RELIEF Diamond mini cutterPig hair, brass wire, steel wire, and felt buff are set as the brush material according to the three types of polishing materials: tubular, cup, and foil. For cutting tiles, glass, stone fragments, shellfish, ceramics, copper plates, aluminum, etc.
- YANASE Electrodeposited diamond bar (spherical type)* For products shipped directly from the manufacturer, if you order by cash on delivery, it will be shipped the next day or later.RoHS directive (corresponding to 10 substances) Correspondence Abrasive Diamondfrom S$9.59Min. 2 days
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) Felt buff with shaftThe selected high-quality wool is compressed at high density. It fits well on soft curved surfaces. Hardness about 65 degrees (according to a rubber hard clock). We recommend using an abrasive for polishing and polishing. For polishing and polishing molds, metals, precious metals, etc. using abra... Read MoreMaterial felt Hardness softfrom S$36.99Min. 2 days
- Sumflex Hexagonal shaft whetstone (for metal) GC materialA grindstone that is attached to a rotary tool for grinding. Uses a hexagonal shaft that does not slip on the chuck. Suitable for grinding carbide, glass, stone, etc. * When using with an impact driver, do not apply too much pressure.Abrasive Grain Size #60 Allowable Rotation Speed (min -1 [rpm]) 5000 Shank Diameter (Φmm) 6.35 Suitable Material Carbide, glass, stone, etc. Abrasive GC material Axis Hex axis
- YANASE Steel wire plated shaft end brushIt is a machined wire made by processing steel wire and has excellent polishing power. Polishing narrow spaces such as holes and grooves. Rust removal, cleaning and surface finishing on the bottom.Wire Diameter Φ(mm) 0.25 Hub Cylinder Diameter (Φmm) 15 Shaft Length (mm) 20 Abrasive Grain Size 220 Hub Cylinder Length (mm) 25 Bristle Length (mm) 27 Shank Diameter (Φmm) 6 Maximum Rotation Speed (min-1[rpm]) 8000 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Steel sheet
- YANASE Hex shaft diamond fileIdeal for sharpening metal, carbide, glass, stone, and sharpening blades. Carbide, ceramic, glass, concrete, brick, tile, stone, casting deburring, shaving, hole, character processing and blade sharpening * Do not use beyond the maximum number of revolutions shown. * Insert the shaft of the produ... Read MoreAbrasive Grain Size #100 RoHS directive (corresponding to 10 substances) Correspondence Material Iron, diamondfrom S$7.99Min. 2 days
- ICHIGUCHI Cone holderA holder for mounting when using cone paper. Use cone paper and cone holder with the same nominal diameter. * For products shipped directly from the manufacturer, if you order by cash on delivery, it will be shipped the next day or later.Maximum Operating Speed (min -1 [rpm]) 10000 Width (mm) 30 Shank Diameter (Φmm) 6 Act on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondence Material Holder: Rubber
- Sumflex Grinding wheel with shaft for metal 3A set of grindstones that are attached to rotary tools for grinding. A general whetstone used for grinding various metals.Set Contents No.3512、No3514、No.3515 Shank Diameter (Φmm) 6 Suitable Material Various metalsfrom S$14.99Min. 7 days
- Sumflex Grinding wheel with shaft (for non-ferrous) GC material Φ3 shaftA grindstone that is attached to a rotary tool for grinding. Suitable for grinding carbide, glass, stone, etc. * When working, pay attention to the permissible rotation speed and wear safety equipment.Shank Diameter (Φmm) 3 Suitable Material Carbide, glass, stone, etc. Abrasive GC materialfrom S$27.99Min. 7 days
- NORTON (SAINT-GOBAIN) SG BlazeTM Ceramic Disc Quick ChangeA disc that uses a quick change system that can be replaced instantly by hand. The high-purity, edgy Norton new ceramic abrasive grain "SG Blaze [[TM]]" offers exceptional durability and outstanding grinding power. Affordable 25 pack. For deburring general steel, stainless steel, alumin... Read MoreWidth (mm) 1.2 Maximum Operating Speed (min -1 [rpm]) 25000 Shaft Length (mm) 4 Trusco Part No. 413-3960 Outer Diameter (Φmm) 50 Shank Diameter (Φmm) 6 Mass (g) 6 Abrasive Grain Size 60 Specification Use "Quick Change Holder"from S$55.99Min. 2 days
- RELIEF 5-Pieces Diamond BitAbrasive Grain Size #180 Shank Diameter (Φmm) 2.35 Rotation Speed at No Load (min-1[rpm]) 30000 Overall Length (mm) 43 Trusco Part No. 859-2709from S$11.99Min. 4 days
- RELIEF Dia Bit SetShank Diameter (Φmm) 2.35 Rotation Speed at No Load (min-1[rpm]) 30000from S$6.49Min. 4 days
- RELIEF Diamond bit set and precision mini fileEngraving, model, plastic model. It can be used for glass engraving, name insertion, etc.Abrasive Grain Size #180from S$9.69Min. 4 days
- SUPER TOOL Carbide bar (shank diameter 3mm) (Spherical) All carbide (W cut)Material Carbide Type All carbide Shaft Length (mm) 35.7 Shank Diameter (Φmm) 3 Shape Sphere type (double cut) Mass (g) 5from S$19.99Min. 6 days
- YANASE Electrodeposition diamond point (shaft diameter 2.34mm)Ideal for polishing plastic, glass, and stone. Ideal for glass engraving. It is also recommended for engraving.RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Plastic, glass, stone Dimension (mm) Φ2×2.34from S$3.99Min. 5 days
- TAG Standard type carbide bar shank diameter 6mm H series doubleMaterial Carbidefrom S$88.99Min. 5 days
- ESCO 21mm diamond disc (# 240)Abrasive Grain Size 240 Esco Part No. EA819AS-103from S$13.99Min. 4 days
- ESCO 75x50mm / 6mm shaft finishing wheel (medium)Esco Part No. EA819AV-75Bfrom S$39.99Min. 4 days
-
-
-
- RELIEF Precision high-speed bit and diamond bit setComes with a mandrel. For engraving work such as engraving, models, plastic models, etc.Shank Diameter (Φmm) 2.35 Rotation Speed at No Load (min-1[rpm]) 30000 Overall Length (mm) 45 Suitable Material Engraving, model, plastic model, etc.from S$11.99Min. 4 days
-
- MonotaRO Flap FoilIt uses a polishing cloth made of alumina abrasive and has moderate grinding power and durability. Since it is supple and fits well to the work, it is possible to work on curved surfaces as well as flat surfaces. Abrasive surface, curved surface polishing Details, narrow area polishing Casting su... Read MoreWidth (mm) 25 Shank Diameter x Length (mm) 6×40 Abrasive Alumina Abrasive Structure Polishing cloth
- MonotaRO Rubber wheelWith a wide variety of particle sizes, you can select the particle size that suits your work from grinding to polishing. It is very familiar to the shape of the work and has a soft feel. Metallic noise and noise during processing are extremely small compared to a whetstone with a shaft. Ideal for... Read MoreRoHS directive (corresponding to 10 substances) Correspondence Shape Cylindrical type Abrasive Grain WA
![32x32mm [blue] 6mm whetstone with shaft](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono03621247-230302-02.jpg)
