It is a machined wire made by processing steel wire and has excellent polishing power.
Polishing narrow spaces such as holes and grooves. Rust removal, cleaning and surface finishing on the bottom.
The tubular shape makes it convenient for work in a narrow range.
For rust removal work. For deburring work.
* Be sure to use safety protective equipment (glasses, mask, gloves, etc.) during work. * Please use at the maximum rotation speed or less. * Since it is a wire processed product, there ar... Read More
Ideal for narrow spaces that cannot be polished with wheels, cup brushes, etc.
Deburring the inner surface of the pipe.
* Do not use for anything other than its intended purpose.
Ideal for narrow spaces that cannot be polished with wheels, cup brushes, etc.
Deburring the inner surface of the pipe.
* Do not use for anything other than its intended purpose.
Since it is a hexagonal shaft type, it can be used with electric impact drills. Since the spring is attached to the base of the wire, it will return to its original position after use even if the wire opens. Suitable for polishing narrow areas such as the bottom and corners.
Polishing of metal su... Read More
Outer Diameter (mm) 15 Maximum Operating Speed (min -1 [rpm]) 3000 Mass (g) 40 Hex Shank across Flats 6.35mm Suitable Material Metal surface
Easy to install and replace because it has a shaft. An end-type brush that is compact, easy to operate due to high-speed rotation, and has excellent workability. Since it is an end type, it is ideal for polishing the bottom surface and corner grooves of small parts.
Polishing aluminum products
A brush that attaches to a rotating tool, applies an abrasive, polishes it, and removes dirt.
It is used for removing rust, paint, dirt, etc. of various metal products.
Shank Diameter (Φmm) 2.34 Allowable Rotation Speed (min -1 [rpm]) 30000 Outer Diameter (mm) 5 Material Brass wire Shape Brush type Suitable Material Various metals
A brush that attaches to a rotating tool, applies an abrasive, polishes it, and removes dirt.
It is used for removing rust, paint, dirt, etc. of various metal products.
Shank Diameter (Φmm) 2.34 Allowable Rotation Speed (min -1 [rpm]) 30000 Outer Diameter (mm) 5 Shape Brush type Material Stainless wire Suitable Material Various metals
It has excellent acid resistance, alkali resistance, and heat resistance, and rust does not occur on the workpiece after polishing.
Polishing narrow spaces such as holes and grooves. Rust removal, cleaning and surface finishing on the bottom.
Since it is a hexagonal shaft type, it can be used with electric impact drills. Since the center of the wire is tied with a wire, it is difficult for the wire to spread during rotation. Suitable for polishing narrow areas such as the bottom and corners.
Polishing of metal surfaces and corners, de... Read More
Outer Diameter (mm) 15 Maximum Operating Speed (min -1 [rpm]) 3000 Mass (g) 40 Hex Shank across Flats 6.35mm Suitable Material Metal surface
Easy to install and replace because it has a shaft. An end-type brush that is compact, easy to operate due to high-speed rotation, and has excellent workability.
Since it is an end type, it is ideal for polishing the bottom surface and corner grooves of small parts. Polishing brass, copper and al... Read More
Easy to install and replace because it has a shaft. An end-type brush that is compact, easy to operate due to high-speed rotation, and has excellent workability.
Since it is an end type, it is ideal for polishing the bottom surface and corner grooves of small parts.
It has excellent grinding power because its hardness is increased by cold stretching.
Polishing narrow spaces such as holes and grooves. Rust removal, cleaning and surface finishing on the bottom.
Steel wire plated stranded wire # 70 carbon (G wire) is used for the brush material. It is sticky, hard to break and resistant to rust. The spring type has a moderate amount of hair and features a wide working range. With liability insurance (limited to accidents in Japan)
It is used for narrow a... Read More
It can be easily attached to power tools, etc. It uses high-quality wire, has excellent durability, and has a long life.
For places that require delicate polishing work, such as small-area surfaces and grooves.
* Be sure to wear protective equipment such as a hard hat and safety glasses when work... Read More
The uniquely developed high carbon steel wire has a long life and excellent safety and grindability. A knot type brush with a shaft for powerful cutting (a twisted bundle of wires).
Deburring of cylindrical holes and inner surface, paint removal, surface treatment.
* Please use protective glasses... Read More
Please select the wire material and shape according to the processed material and processed part.
Used for rust removal, paint removal, and deburring.
* Dustproof glasses are essential as they will always break off.
A brush that attaches to a rotating tool, applies an abrasive, polishes it, and removes dirt.
It is used for removing rust, paint, dirt, etc. of various metal products.
Shank Diameter (Φmm) 2.34 Allowable Rotation Speed (min -1 [rpm]) 30000 Outer Diameter (mm) 5 Shape Brush type Material Steel wire Suitable Material Various metals
Stainless wire (SUS) It is resistant to acids, alkalis and heat, does not rust and breaks less than hard steel wires. We carefully select high quality brush materials. We recommend using an abrasive for polishing and polishing.
Polishing of stainless steel aluminum products Polishing in aqueous a... Read More
Maximum Operating Speed (min -1 [rpm]) 15000 Suitable Material Stainless steel, aluminum, etc.
It can be easily attached to power tools, etc. It uses high-quality wire, has excellent durability, and has a long life.
It is the most suitable shape for polishing the bottom and corners of deep places and corners.
* Be sure to wear protective equipment such as a hard hat and safety glasses when... Read More
Material Shaft: Steel, Wire rod: Steel wire Shank Diameter (Φmm) 6 Material of Bristle Wire steel wire
Black hair (pig hair) It is flexible, elastic and strong. Ideal as a material for brushes and brushes. We carefully select high quality brush materials. We recommend using an abrasive for polishing and polishing.
For various polishing For cleaning For payment
* For safety, pay attention to the pr... Read More
Easy to install and replace because it has a shaft. An end-type brush that is compact, easy to operate due to high-speed rotation, and has excellent workability.
Since it is an end type, it is ideal for polishing the bottom surface and corner grooves of small parts.
Wire Diameter Φ(mm) Hard steel wire 0.1 Suitable Tool Micro grinder Shaft Length (mm) 36 Shank Diameter (Φmm) 3 Maximum Operating Speed (min -1 [rpm]) 15000 Remark Metal product peeling and grinding
Steel wire plated stranded wire # 70 carbon (G wire) is used for the brush material. It is sticky, hard to break and resistant to rust. The method of fixing the brush wire is nailing. Compared to the caulking type, there is less wire loss and root breakage, enabling stable work. With liability in... Read More
Wire Diameter Φ(mm) 0.25 Shank Diameter (Φmm) 6 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Various metals
Since it has a shaft, it is easy to install and replace, so it is very easy to use.
It is ideal for thin rust removal polishing of various metal products, base polishing of plating coating, peeling of paint, etc., and stain removal in narrow spaces. It is used by attaching it to electric tools an... Read More
Suitable Material Various metals Shaft Length (mm) 36 Suitable for Electric / pneumatic tool grinder Hub Cylinder Length (mm) 9 Hub Cylinder Diameter (Φmm) 5 Wire Diameter Φ(mm) 0.1 Other With liability insurance
YANASE Steel wire plated shaft end brushIt is a machined wire made by processing steel wire and has excellent polishing power. Polishing narrow spaces such as holes and grooves. Rust removal, cleaning and surface finishing on the bottom.Wire Diameter Φ(mm) 0.25 Hub Cylinder Diameter (Φmm) 15 Shaft Length (mm) 20 Abrasive Grain Size 220 Hub Cylinder Length (mm) 25 Bristle Length (mm) 27 Shank Diameter (Φmm) 6 Maximum Rotation Speed (min-1[rpm]) 8000 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Steel sheet
![6mm [3mm axis] stainless wire brush](https://jp.images-monotaro.com/Monotaro3/pi/middle/mono03615744-221024-02.jpg)
