Buffing Bits
Felt buff is a type of polishing with a shaft used for polishing and polishing metal and precious metals. Use an electric drill to remove stubborn dirt and rust with a rotating force. A buff made of soft wool can be finished like a mirror surface of iron, stainless steel, or metal. Buffs that are more effective when applied with water or detergent are suitable for removing dirt around water in sinks, bathrooms, and toilets. In addition, the type with a cut on the surface of the buff sponge is effective for scraping off the dirt on the cut surface. If you are worried about scratches caused by polishing, you should use a soft buff made of non-woven fabric.
Other Related Pages
Leutor (NIHON SEIMITSU KIKAI KOSAKU) Felt buff with shaftThe selected high-quality wool is compressed at high density. It fits well on soft curved surfaces. Hardness about 65 degrees (according to a rubber hard clock). We recommend using an abrasive for polishing and polishing. For polishing and polishing molds, metals, precious metals, etc. using abra... Read MoreMaterial felt Hardness softfrom S$36.99Min. 2 days- MonotaRO Felt Buffing Wheel Straight with ShankA wheel for finishing such as polishing and wiping work. Please use it together with an abrasive such as a blue stick. Polishing and polishing stainless steel, aluminum, precious metals, and other metals * Do not use for anything other than its intended purpose.
- MonotaRO Felt wheel Cannonball type with shaftA wheel for finishing such as polishing and wiping work. Please use it together with an abrasive such as a blue stick. The shape is a cannonball type. Polishing and polishing stainless steel, aluminum, precious metals, and other metals * Do not use for anything other than its intended purpose.Suitable for Air/electric micro grinder
- YANASE Wheel with Felt ShaftA buff made by compressing soft wool at high density. You can finish it like a mirror. Mirror finish polishing of metals such as iron and stainless steel. Polishing after shafted sisal wheels and cotton wheels. Polishing, polishing, and wiping metal.Width (mm) 25 Shank Diameter (Φmm) 6
- YANASE Polishing Felt Buff SetIt's a great deal with lots of it! A beautiful package that makes it easy to see and select the contents! Polishing of metal, shells, glass, stones, and plasticsShank Diameter (Φmm) 2.35 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Metal, shell, glass, stone, plastic
- YANASE Impact mushroom buff (hexagonal shaft)It is a mushroom type and can be used on both the tip and sides. The mushroom shape and elasticity make it a perfect fit for any R surface. Finish polishing of metal, woodwork, and resin. Cleaning inside the pipe. * Apply an abrasive (blue stick, white stick, etc.) before use.Hex Width Across (mm) 6.35 RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Metal / woodwork / resin
- YANASE Mushroom BuffThe mushroom shape allows you to use the entire tip and sides. Mirror finish buff * For products shipped directly from the manufacturer, if you order by cash on delivery, it will be shipped the next day or later.Shank Diameter (Φmm) 6 RoHS directive (corresponding to 10 substances) Correspondence Material Cotton Color White
- YANASE Wheel with felt shaft (cylindrical type)Ideal for polishing metal and mirror polishing! Mirror finish polishing of metal. Mirror finish polishing after hemp buff wheels and cotton buff wheels. Polishing, polishing, and wiping metal. * Apply an abrasive (blue stick, white stick, etc.) before use.RoHS directive (corresponding to 10 substances) Correspondence Shape Cylindrical type Suitable Material Metal
- Sumflex Hexagon felt buff (cannonball)Hexagonal shaft type felt buff rotating tool and abrasive material that are hard to slip with a chuck are used for polishing and finishing work. Used for polishing and finishing various metals.Axis Hex axis Shape Shell type Allowable Rotation Speed (min -1 [rpm]) Up to 5000 Material felt
- H&H Stainless steel mirror finish buff with hexagon shaftIt is a mixed hair type that does not burn easily and is compatible with abrasives. Ideal for mirror finishing and final finishing of all metals. Suitable for surface polishing. For mirror finishing of metal and wiping off abrasive material remaining after puff polishingWidth (mm) 12 Maximum Operating Speed (min -1 [rpm]) 3000 Shank Diameter (Φmm) 6.35
- 3M Spiral wheelSpiral-shaped silicon is impregnated with an abrasive to enable smooth semi-finish polishing work in a short time. * Mandrail is sold separately.
- Sumflex Hexagon felt buff (cylindrical)Hexagonal shaft type felt buff rotating tool and abrasive material that are hard to slip with a chuck are used for polishing and finishing work. Used for polishing and finishing various metals.Shape Cylindrical type Axis Hex axis Allowable Rotation Speed (min -1 [rpm]) Up to 5000 Material felt
- YANASE Mushroom UnilonThe mushroom shape allows you to use the entire tip and sides. The mushroom shape and elasticity make it a perfect fit for any R surface. Wood finish, metal finish polishing * For products shipped directly from the manufacturer, if you order by cash on delivery, it will be shipped the next day or... Read MoreShank Diameter (Φmm) 6 Shank Diameter x Length (mm) 6×39 Material Non-woven
- YANASE Wheel with Felt Shaft (Cannonball Type)Ideal for polishing metal and mirror polishing! Mirror finish polishing of metal. Mirror finish polishing after hemp buff wheels and cotton buff wheels. Polishing, polishing, and wiping metal. * Apply an abrasive (blue stick, white stick, etc.) before use.RoHS directive (corresponding to 10 substances) Correspondence Suitable Material Metal Shape Shell type
- Sumflex Sanderbuff TaikoLaminated type that fits the work, spherical type that is easy to get used to. Nylon non-woven fabric impregnated with abrasive grains enables soft polishing. Rust removal, wood grain, etc.Allowable Rotation Speed (min -1 [rpm]) 5000 Shank Diameter (Φmm) 6.35 Diameter (Φmm) 60 Material Non-woven Shape Spherical
- Sumflex Felt BuffIt is used for finishing metal etc. by applying an abrasive.Material felt Suitable Material Metal etc. Thickness (mm) 10 Allowable Rotation Speed (min -1 [rpm]) 3000 Shank Diameter (Φmm) 6
- Sumflex Felt Buff with ShaftIt is used for finishing metal etc. by applying an abrasive.Allowable Rotation Speed (min -1 [rpm]) 30000 Suitable Material Metal etc. Material felt Shank Diameter (Φmm) 3 Shaft Length (mm) 35
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) Felt buff with shaftThe selected high-quality wool is compressed at high density. The soft type is impregnated with resin to make it harder, and it is suitable for polishing hard materials with less abrasive biting. Hardness about 90 degrees (according to a rubber hard clock) We recommend using an abrasive for polis... Read MoreMaterial felt Hardness hard
- Sumflex Felt buff with shaftIt is used for finishing metal etc. by applying an abrasive.Allowable Rotation Speed (min -1 [rpm]) 10000 Shank Diameter (Φmm) 6 Suitable Material Metal etc. Material felt
- SUN POWER Sisal cloth with shaft (for stainless steel, brass, die-casting)Thickness (mm) 10 Shaft Length (mm) 50 Suitable Material Stainless steel, brass, die casting Shank Diameter (Φmm) 6
- H&H Plastic finishing buff with hexagon shaftThe texture is fine and the finish is beautiful, making it difficult to polish. It goes well with semi-kneaded compounds and is ideal for polishing plastic and wood. It also fits curved and uneven surfaces. For finish polishing and polishing of plastics and resins, and polishing of varnished wood... Read MoreThickness (mm) 3 Maximum Operating Speed (min -1 [rpm]) 3000 Shank Diameter (Φmm) 6.35 Suitable for Plastic, synthetic resin, wood, bamboofrom S$6.39Min. 2 days
- Sumflex Sponge Polisher Bonbori MiniA soft sponge is processed into a spherical shape, and a neutral detergent and compound are used together for cleaning work and polishing work in the home. Attached to electric drills, impact drivers, and flexible shafts for home cleaning (sinks, satellite pottery glass, mirrors, etc.) and polish... Read MoreProper rotation speed (min -1 ) 1000 Maximum Operating Speed (min -1 [rpm]) 2500 Thickness (mm) 35 Outer Diameter (Φmm) 50 Width Across Flats (mm) 6.35
- ICHIGUCHI Polylite foil TUses a special non-woven abrasive. The finished surface is glossier than Scolite. Oxide film and rust removal, stain removal welding, cleaning before plating Aluminum, copper scratch blurring, polish painting, roughening of skin before laminating Sealing material cleaning Fine deburring of metal ... Read MoreMaximum Operating Speed (min -1 [rpm]) 12000 Shaft Length (mm) 35 Shaft Diameter 3mm Suitable Material Aluminum, copper, etc. Act on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondence
- NAKANISHI (NSK) Fiber Sander (Shank Diameter 3mm)It has excellent flexibility and can softly polish only the surface without scraping flat or curved surfaces. It has excellent durability because it retains abrasive grains with strong fibers. There are many pores and there is almost no clogging, and heat generation on the machined surface is sup... Read MoreShank Diameter (Φmm) 3
- YANASE Felt stickA felt non-woven fabric developed for finish polishing of molds. Mirror finish is possible to every detail.Dimension (mm) 5×6×100 RoHS directive (corresponding to 10 substances) Correspondencefrom S$33.99Min. 2 days
- Sumflex Hobby mandrelIt is used by attaching it to a product without a shaft.Specification Mounting screw 2mm Material Steel Shank Diameter (Φmm) 2.34
- Sumflex Leather craft bit Cloth for polishing edgeA bit for leather craft. It is used by attaching it to a mini router, etc. A bit that removes the fluff on the edge (cut). Removes fluff in a short time. * When working, pay attention to the permissible rotation speed and wear safety equipment.Outer Diameter (Φmm) 6.3 Proper rotation speed (min -1 ) 5000～10000 Shank Diameter (Φmm) 3.2
- Sumflex Sponge polisherA sponge that washes the work material with water or detergent! A ball-shaped sponge polisher with horizontal and vertical slits that blend into flat and uneven surfaces. Cleans and waxes sinks, tiles, bathtubs, car aluminum wheels, etc.Proper rotation speed (min -1 ) 1000 Maximum Permissible Rotational Speed (s-1[rpm]) 2500 Hex Width Across (mm) 6.35
- ICHIGUCHI Felt wheel with shaft (cannonball)If you use a blue stick or a white stick together, the work will be finished on a mirror surface. The shape is a cannonball type. Polishing / polishing / finishing of stainless steel, brass, aluminum and precious metals. Mirror polishingAct on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondence
- H&H Felt buff with magicIt is effective to use various abrasives for mirror polishing for polishing wood products, metals, resins, and masonry products.from S$14.99Min. 2 days
- Minitor Minimo Drill ChuckShank Diameter (Φmm) 2.34 Overall Length (mm) 49.5 Trusco Part No. 499-8219 Mass (g) 7 Outer Diameter (mm) 7.5 Type Drill chuck Material Steel
- PROXXON Felt buff Φ22mmThe buff itself has no polishing power and can be mirror-finished by using an abrasive. In addition, it is a very soft buff that can wipe off dirt when used without using abrasives. Super finish of metal and glass, polishing, wiping after polishing workShaft Diameter (Φmm) 2.35 Diameter (Φmm) 22 Thickness (mm) About 8 RoHS directive (corresponding to 10 substances) Correspondence Material feltfrom S$14.99Min. 2 days
- Leutor (NIHON SEIMITSU KIKAI KOSAKU) Wheel Felt BuffThe selected high-quality wool is compressed at high density. We recommend using an abrasive for polishing and polishing. The soft type fits well on soft curved surfaces. Hardness about 65 degrees. The hard type is a soft type impregnated with resin and hardened, and is suitable for polishing har... Read MoreHole Diameter (Φmm) 1.8 Maximum Operating Speed (min -1 [rpm]) 15000 Material feltfrom S$16.99Min. 2 days
- ICHIGUCHI Felt wheel with shaft (straight)If you use a blue stick or a white stick together, the work will be finished on a mirror surface. The shape is a straight type. Polishing / polishing / finishing of stainless steel, brass, aluminum and precious metals. Mirror polishingAct on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondence
- Sumflex Finish buff taikoLaminated type that fits the work, spherical type that is easy to get used to. Used for finishing after polishing.Allowable Rotation Speed (min -1 [rpm]) 5000 Hex Width Across (mm) 6.35 Diameter (Φmm) 60mm Material Carako Shape Sphericalfrom S$24.99Min. 2 days
- NORTON (SAINT-GOBAIN) Finished felt disc quick changeA disc that uses a quick change system that can be replaced instantly by hand. It is used as the final finishing application for quick change systems such as polishing and mirror polishing. It can also be used by applying an abrasive. Affordable 25 pack. For mirror polishing, polishing, wiping, a... Read MoreMaterial Wool felt Outer Diameter (Φmm) 50 Suitable Material Stainless steel / general steel Width (mm) 4 Shaft Length (mm) 4 Maximum Operating Speed (min -1 [rpm]) 12000 Mass (g) 6 Trusco Part No. 413-3943 Specification Uses a dedicated “Quick Change Holder” Shank Diameter (Φmm) 6
- Sumflex Felt BuffIt is used for finishing metal etc. by applying an abrasive. * Please use the mandrel (H-700) for mounting. Mandrel (H-700) is not included.Hole Diameter (Φmm) 1.5 Thickness (mm) 2 Material felt Allowable Rotation Speed (min -1 [rpm]) 30000 Diameter (Φmm) 25 Shape Wheel type Suitable Material Metal etc.
- PROXXON For silicon buffing (2 types)Polishing and polishing of metal, non-metal, etc.Shaft Diameter (Φmm) 2.35 Maximum Rotation Speed (min-1[rpm]) 25000 RoHS directive (corresponding to 10 substances) Correspondencefrom S$17.99Min. 2 days
- ICHIGUCHI Felt foil Straight with shaftIf you use a blue stick or a white stick together, the work will be finished on a mirror surface. The shape is a straight type. * For products shipped directly from the manufacturer, if you order by cash on delivery, it will be shipped the next day or later.Act on Promoting Green Procurement Conformity RoHS directive (corresponding to 10 substances) Correspondence Abrasive None Type felt Abrasive Structure feltfrom S$8.89Min. 2 days
- Sumflex Hexagon Sanderbuff Taiko Φ70Nylon non-woven fabric is compressed and laminated to improve polishing power. A spherical sander that fits into unevenness. It is used for polishing various metals, removing rust, and glossing wood.Allowable Rotation Speed (min -1 [rpm]) 5000 Shank Diameter (Φmm) 6.35 Abrasive A material Material Non-woven Suitable Material Various metals, wood
