It is a polishing pad that has a track record of nearly 40 years as a product made in Japan and has been supported by many people. With a high repeat rate, it has outstanding reliability and a sense of security. It is a standard product used for all purposes such as rust removal.
Rust removal Scr... Read More
Abrasive Grain Size #320 Dimension (mm) 150×230 Abrasive A (aluminum oxide) Color Red tea Grade VF
Flexibility that fits well on curved surfaces, and familiarity due to the cushioning effect. It is hard to get clogged and can be washed with water. An elastic abrasive made by applying and adhering abrasive particles to a sponge with moderate elasticity. Excellent polishing ability.
Finish polis... Read More
Dimension (mm) 114×140 Thickness (mm) 5 Abrasive A (aluminum oxide) Suitable Material Wood, plastic, pottery, metal, etc.
This is the type that gives the finest finish among the pads. It is used for finishing nameplates, finishing electronic parts before plating, matting wood-painted surfaces, and blurring scratches on stainless steel, aluminum, and copper.
Extra fine finish
Abrasive Grain Size #800 Trusco Part No. 126-6390 Dimension (mm) 150×230 Color Gray Abrasive S (silicon carbide) Grade UF
It is a polishing pad that has a track record of nearly 40 years as a product made in Japan and has been supported by many people. With a high repeat rate, it has outstanding reliability and a sense of security. It is a standard product used for all purposes such as rust removal.
Rust removal Scr... Read More
Abrasive Grain Size #320 Dimension (mm) 150×230 Abrasive A (aluminum oxide) Color Red tea Grade VF
The most standard type, it is a versatile product that is used for all purposes. It is widely used for removing rust and dirt on steel plates and pipes, blurring scratches on aluminum products, hairlines, paint coating, and roughening before laminating.
Rust remover Scratches Blur (Universal type... Read More
Dimension (mm) 150×230 Abrasive Grain Size 320 Thickness (mm) About 8 Abrasive Aluminum oxide Color Red tea Suitable Material Steel plate, aluminum, etc.
Workability for professional purveyors that you can understand by using it! Domestic highest quality, excellent durability, beautiful finish! The non-woven fabric is formed by combing long nylon fibers, which is called the carding method, so the fibers are hard to unravel and have high durability... Read More
Dimension (mm) 150×230 Abrasive Grain Size 320 Thickness (mm) 8 Suitable Material Aluminum etc. Abrasive Aluminum oxide Color Red tea
A precision polishing film with a uniform coating of fine particle abrasives. Deep scratches are less likely to occur on the polished material, resulting in a uniform and stable finish. Water sharpening is also possible. Since it is color-coded according to particle size, you can check the count ... Read More
Dimension (mm) 230×280 Suitable Material Plastic, metal, precious metal, etc. Abrasive WA
We use a wide variety of high-quality nylon suitable for a wide range of applications. Due to the open structure, it is hard to get clogged and has excellent flexibility and elasticity. It has excellent water and oil resistance, and also has good heat resistance (180 ° C).
Dimensions (Length L x Width W x Thickness) (mm) 150 × 230 × about 8 RoHS directive (corresponding to 10 substances) Correspondence
Double the work speed (compared to conventional manufacturers). Speed up and reduce work costs per hour. Lifespan 20-30% UP (compared to conventional manufacturers). It is a durable material with long-lasting polishing power. It reduces the amount used and saves the trouble of replacement. Althou... Read More
Abrasive Grain Size #320 Dimension (mm) 150×230 Mass (g) 30 Trusco Part No. 485-5116 Abrasive A (aluminum oxide) Color Red tea Grade VF
It is used for the same purpose as No.7447, but with a finer finish. It is used for cleaning finishes of other non-ferrous metals such as printed circuit boards.
Fine finish
Abrasive Grain Size #400 Trusco Part No. 126-6381 Dimension (mm) 150×230 As ONE Part Number 2-7694-07 Mass (g) 32 Color Green Abrasive S (silicon carbide) Grade SF
It has polishing power and is suitable for peeling oxide film and painted surface. It is also suitable for stainless steel hairline finishes.
Hairline film peeling
Abrasive Grain Size #180 Trusco Part No. 126-6349 Dimension (mm) 150×230 As ONE Part Number 2-7694-03 Mass (g) 67 Abrasive A (aluminum oxide) Color Brown Grade CP-M
While maintaining the sharpness of Kenmaron, it has improved compatibility with workpieces, water resistance, and oil resistance. With a soft texture, it fits well on uneven parts and provides a uniform polished surface in every detail. In addition, the polishing power is maintained even in wet w... Read More
As a next-generation abrasive that is different from sandpaper and grinding wheels, it is a product in which abrasive grains are adhered to a cloth (= non-woven fabric) with bonded fibers without weaving chemical fibers. Since it is made of non-woven fabric, it has elasticity and has an open stru... Read More
Dimension (mm) 150×230 Thickness (mm) About 8 Abrasive Structure Non-woven
Since it is flexible, it fits well on curved surfaces. Since it is a nylon fiber, water and oil can be used together. It is softer than Sumitomo 3M Scotch-Brite, so it is suitable for detailed work. It is a pop-up sheet that can be torn off according to the work content. There is no clogging like... Read More
Dimensions (mm x m) 200×6 Thickness (mm) About 5 Suitable Material Metal, woodwork, resin, etc. Base Material Nylon nonwoven fabric Shape Sheet type
A polishing and polishing cloth that contains ultrafine abrasive materials and polishing wax.
* Do not polish anything that is originally glossy. You may get stubborn eyes. Be careful not to polish the plated products too much. It cannot be washed with water. Do not polish matte finishes such as ... Read More
Dimension (mm) 125×195 RoHS directive (corresponding to 10 substances) Correspondence
It is a product that pursues ease of use with a soft texture by improving the sand sheet. The sharpness and life are perfect, and the center is perforated so that it can be cut in half. It is more versatile and can be used in a wider range than sand sheets. It can also be used with water and oil.
A durable nylon non-woven fabric that is evenly impregnated with abrasive grains with a special adhesive. It has excellent durability without fraying or tearing. There is no clogging like sandpaper. Can be used in combination with water, oil and detergent. The size of the fit fits in the palm of ... Read More
Dimension (mm) 100×150 Color Dark brown Abrasive Structure Non-woven
A pop-up type polishing pad that allows you to pull out the required amount from the inside. A high-quality pad with a uniform coating of abrasives does not clog and hits small parts, so you can finish it beautifully.
Rust removal and scratch blur (universal type)
* Please wear safety protective ... Read More
Sheet Size (mm) 100×200 Dimensions (mm x m) 200×6 Abrasive Grain Size 320 Thickness (mm) About 5 Abrasive Alumina Base Material Nylon nonwoven fabric
You can polish even the slightest irregularities and even the corners of narrow spaces. Do not over-shave the surface of the object to be polished. There is no clogging like sandpaper. The fibers are hard to break and can be used many times. A smooth and uniform polished surface can be obtained. ... Read More
The fibers are thick, tough and durable. Suitable for removing rust, dirt, and stubborn deposits on cast and forged products. Especially effective for washing with hot water.
Removal of deposits
Abrasive Grain Size #280 Trusco Part No. 126-6357 Dimension (mm) 150×230 As ONE Part Number 2-7694-06 Mass (g) 32 Abrasive A (aluminum oxide) Grade F Color Red tea
Compared to sandpaper, it does not cause clogging, and because it is thick, it fits well in the hand and has excellent workability. A uniform finished surface can be obtained without deep scratches, and the flexibility makes it ideal for work on curved surfaces.
Rust removal, wood hangnail remova... Read More
Dimension (mm) 150×230 Heat Resistance Temperature (℃) 90
The elastic material of the hairline pad has little settling, and the abrasive grains are firmly held by the special spraying treatment, so it fits well and gets caught in the object to be polished, and the hairline can be easily inserted. It is used for rust removal, cleaning work, and concrete ... Read More
Abrasive Grain Size #60 Grade - Dimension (mm) 150×230 Trusco Part No. 170-3692 As ONE Part Number 2-7694-01 Mass (g) 67 Abrasive A (aluminum oxide) Color Chestnut
The elasticity of the sponge demonstrates excellent polishing power. It is flexible and fits curved surfaces. Wet and dry polishing is possible.
For removing paint, removing rust, polishing woodwork, removing rust on bicycles, and removing stains on pottery and glass.
* Do not use for any other p... Read More
Water resistant paper with a super shiny finish. Ideal for finishing precision parts and dies, and pre-processing ultra-luxury paint finishes.
Pre-process of painting finish, finishing work of plastic and metal products.
* Please do not use for gold and gold plating.
Dimensions, Height x Width (mm) 135×115 Suitable Material Various metals
It is possible to easily remove small scratches and dirt and restore the luster. It can handle everything from polishing to super-finishing with fine particle abrasives and glazing wax. Please use according to the purpose depending on the type of particle size.
* Do not use on a matte surface as ... Read More
Since the cross has perforations, it can be cut without using scissors, and it can be used for all kinds of work. It does not clog like sandpaper. It fits well on curved surfaces and does not get deep scratches, so you can finish only the surface without scraping the material. It has excellent fl... Read More
A laminated type of Scotch-Brite and sponge, dedicated to foot blurring work before painting. Familiar, uniform and soft paper grain. Water sharpening and air sharpening are possible.
Part number 7397 (Suitable for adding to electrodeposition coating when replacing parts) Part number 7398 (Suitab... Read More
Dimensions, Thickness x Width W x Length L (mm) 25×85×150
Finishes the polished grain equivalent to P1000 to a uniform and fine grain equivalent to P2000, and does not cause deep scratches.
* Please attach it to the dedicated baffle pad and use it for empty sharpening.
Abrasive Grain Size 2000 equivalent RoHS directive (corresponding to 10 substances) Correspondence Specification For skin adjustment Type Green
The elasticity of the sponge demonstrates excellent polishing power. It is flexible and fits curved surfaces. It is economical because it can be used on both sides. Wet and dry polishing is possible.
For removing paint, removing rust, polishing woodwork, removing rust on bicycles, and removing st... Read More
High quality manufactured by a leading domestic manufacturer! It is water and oil resistant and can be used both dry and wet. Since the tough polyester film is uniformly coated with abrasive fine particles, deep scratches do not occur and a uniform finished surface can be obtained.
For removing s... Read More
Dimensions, Height x Width (mm) 280×228 Thickness (μm) 75 Abrasive Aluminum oxide Suitable Material Plastic, metal, etc.
When searching for dust and removing dust, the polished grain equivalent to P1500 is finished to a uniform and fine grain of P3000 or higher, and deep scratches do not occur.
* Please attach it to the dedicated baffle pad and use it for empty sharpening.
Type Black RoHS directive (corresponding to 10 substances) Correspondence Specification For finishing dark cars Abrasive Grain Size No. 3000
Since the paper can be attached and detached in a magical manner, it is easy to replace the paper and there is no waste. Because it is made of wood with a moderate weight, it fits in your hand the more you use it. It is processed into a shape that does not slip even when used with work gloves.
* ... Read More
RoHS directive (corresponding to 10 substances) Correspondence
It is a sandwich structure with Ken Maron Super stuck on both sides of the sponge. It has excellent water retention and familiarity and can be used in both wet and dry types.
Foot attachment before painting, polishing of urethane bumper. Polishing of resin products.
Dimensions, Height x Width (mm) 150×85 Suitable Material Resin etc.
Excellent polishing power and uniform polishing surface can be obtained. It has flexibility and cushioning properties, fits well into the shape of the material, and does not over-shave. The sheet has perforations, so it's easy to fold in half and you can easily cut it by hand. It demonstrates... Read More
Dimension (mm) 150×230 Suitable Material Metal, woodwork, etc.
You can use it by cutting it to the required size with scissors or a utility knife. Since the back side is a sticker, it can be attached to various things and used.
Polishing of ceramics, glass and pottery.
* Do not use for any other purpose.
Dimensions, Height x Width (mm) 200×100 Thickness (mm) About 0.4 Mass (g) About 25 Suitable Material Ceramic, glass, pottery Base Material Copper plate (nickel plating)