Abrasive Sharpening Stones
A grindstone is a type of abrasive used to sharpen the surface of knives, scissors, and ceramics. A diamond grinding wheel is a grinding wheel for sharpening blades used for polishing carbide, knives, scissors, etc. The tough oil grindstone is a relatively familiar grindstone for polishing, deburring metal, glass, jewelry, etc., and there are medium, fine and extra fine grain sizes. Oil grindstones can be either block-shaped or stick-shaped, which is suitable for grinding molds and drills. A ceramic grindstone can be sharpened sharply in a short time. This is a recommended grindstone for sharpening professionals such as blade sharpeners.
Other Related Pages
KING King Deluxe WhetstoneThis product was developed as a grindstone for medium sharpening of all types of blades. Since it is manufactured with a special abrasive material, the quality is permanent, it takes a short time, and it has a sharp blade with sharpness, which improves work efficiency. For rough sharpening (grain... Read MoreDimension (mm) 207 x 66 x 34 (whetstone only) Material Special abrasive- KING King Finishing WhetstoneThis is the finest product made by firing the finest ultra-fine abrasive material developed as a super-finishing blade with a special technology. The quality is always the same, the blade and the grindstone stick well and it is easy to sharpen, and the blade is fast and does not damage the cuttin... Read MoreDimension (mm) 210×73×22 Abrasive Grain Size 6000 Material Special abrasive
- YAMATO SEITOSYO Oil whetstone rough (A corner)The oil grindstone is a bidderized grindstone made from A abrasive grains as the main raw material. Since the material is tough, it is ideal for grinding iron, steel, and other materials with high tensile strength and grinding with a large amount of machining allowance. Unlike the honing whetston... Read MoreAbrasive Grain Size 120 (coarse grain) Abrasive A abrasive (alumina abrasive) Suitable Material Iron, steel, etc. Type Square
- SUN TIGER C Square Asahi Tiger MarkUsing high-quality silicon carbide as a raw material, we fired and manufactured it using the technology cultivated over many years. Kongo Toishi is mainly used for correcting blade spills and rough sharpening of blades in general, but it also has various uses such as sharpening stones and concret... Read MoreDimension (mm) 205×50×25
- NANIWA (Naniwa Abrasive Mfg) New Omura Sharpening StoneA natural-style rough whetstone that achieves the sharpening taste of a natural whetstone.Abrasive Grain Size #150 Abrasive Silicon carbide
- Matsunaga Natural Whetstone Amakusa WhetstoneNatural grindstone (Producing area: Kumamoto Prefecture) * Please use while sprinkling a small amount of water on the grindstone.Abrasive Grain Size # 500 equivalent
- KING King Finishing Whetstone S-2 TypeThis is the finest product made by firing the finest ultra-fine abrasive material developed as a super-finishing blade with a special technology. The quality is always the same, the blade and the grindstone stick well and it is easy to sharpen, and the blade is fast and does not damage the cuttin... Read MoreAbrasive Grain Size # 6000 (for final super finish) Dimension (mm) 190×70×20 Included Accessories Dedicated stand Material Special abrasive
- IWOOD Electroplated Diamond GrindstoneEven hard cutting edges can be sharply polished in a short time.
- Matsunaga Natural Whetstone Water-Use WhetstoneNatural grindstone (Producing area: Kumamoto Prefecture) * Please use while sprinkling a small amount of water on the grindstone.Abrasive Grain Size # 700 equivalent
- Itoh Corp. (1 2 3) Vise Type Whetstone Base with CenterA whetstone with a minimum length of 18 cm and a maximum length of 21.3 cm can be inserted.Outer Dimensions (mm) 280×70 Material / Finish Iron / chrome plating
- Tsuboman Atma Economy Spare BladeDimension (mm) 75×210×1.0 RoHS directive (corresponding to 10 substances) Correspondence
- KING King Gold Finish WhetstoneThis is the finest product made by firing the finest ultra-fine abrasive material developed as a super-finishing blade with a special technology. The quality is always the same, the blade and the grindstone stick well and it is easy to sharpen, and the blade is fast and does not damage the cuttin... Read MoreDimension (mm) 210×73×22 Abrasive Grain Size 8000 Trusco Part No. 818-3854 Material Special abrasivefrom S$139.90Min. 2 days
- KYOKUTO (Kyokuto-Sanki) Whetstone standHard rubber and stainless steel are used for the main body, and it adheres well to the workbench. The grindstone does not move much, and the rubber protects the grindstone.Effective Width (mm) 213～180 Material (Main Unit) Hard rubber / iron (chrome plating)
- Tsuboman Atoma bamboo fileBamboo-based diamond file. Bamboo bend fits the work material.Suitable Material Mold, metal, etc.from S$13.99Min. 5 days
- TRUSCO Mold whetstone PAIdeal for dry use such as press dies. Uses PA (pink random) abrasive grains and has excellent grinding power. Polishing work for press dies. Machined finish. It can also be used wet.Length (mm) 150 Material Al2O3、SiO2 Suitable Material Mold Color Pinkfrom S$69.99Min. 2 days
- KING King Deluxe PART2This product was developed as a grindstone for medium sharpening of all types of blades. Since it is manufactured with a special abrasive material, the quality is permanent, it takes a short time, and it has a sharp blade with sharpness, which improves work efficiency. For planes, chisels, knives... Read MoreDimension (mm) 207×66×34from S$26.99Min. 6 days
- Tsuboman Spare blade for Atoma wrapper: Atoma miniEconomical replacement blade method.Orbital Polishing Diameter (mm) 12.2×43from S$8.89Min. 5 days
- SUN UP Double-sided diamond whetstone # 300/800Please use it for sharpening the blade of hardened sickle, stainless steel, carbide tip, high-speed steel, etc. Since the diamond grindstone has almost no reduction, there is no uneven sharpening. Since it is a double-sided whetstone type, lightly rub the blade with severe blade spillage for # 30... Read MoreMass (g) 400 Overall Length (mm) 180from S$39.99Min. 6 days
- NANIWA (Naniwa Abrasive Mfg) Shrimp Mark Micron Deluxe Large M-32For sharpening blades for professionals.Dimension (mm) 210×65×32from S$36.99Min. 6 days
-
- NANIWA (Naniwa Abrasive Mfg) Dirt / rust cancel rubber SAKUEraser type for removing dirt and rust. Rust remover * It may be deformed if used near high temperature.Dimension (mm) 50×40×20 Mass (g) 84 Material Alumina abrasive / polyvinyl chloridefrom S$10.99Min. 5 days
- ESCO Grindstone set for small knivesYou can sharpen it immediately by sprinkling a little water or oil on the surface. Ideal for sharpening before and after using small knives and swords.from S$189.90Min. 4 days
- ESCO 210x70x25mm / # 600 square whetstone (for rough research)Abrasive Grain Size 600 Esco Part No. EA522G-82from S$159.90Min. 4 days
- MonotaRO Diamond Grindstone Both SidesDouble-sided type with different particle size. Work efficiency is improved with a stand. Polishing of cemented carbide, hardened steel, ceramics, etc. Polishing of knives, scissors, etc. *Do not use for purposes other than sharpening blades. *Please do not use it to straighten your face. *Please... Read MoreOverall Length (mm) 200 Width (mm) 70 Thickness (mm) 8.3 Material Body: steel resin stand: ABS Suitable Material Carbide, hardened steel, ceramic, etc. Specification Wet and dry
- DAYTONA Oil Stone # 400We have a lineup of recommended tools for disassembly and assembly work, such as incorporating 4 mini-type and scooter-type engine parts that are often sold at Daytona, and for maintenance overhaul!Dimension (mm) 100×25×13 Abrasive Grain Size 400
- YAMATO SEITOSYO Extra Fine Oil Sharpening Stone (A Rectangle)The oil grindstone is a bidderized grindstone made from A abrasive grains as the main raw material. Since the material is tough, it is ideal for grinding iron, steel, and other materials with high tensile strength and grinding with a large amount of machining allowance. Unlike the honing whetston... Read MoreAbrasive Grain Size 400 (fine) Abrasive A abrasive (alumina abrasive) Suitable Material Iron, steel, etc. Type Square
- MonotaRO Vice Type Whetstone HolderA whetstone stand that can hold whetstones from a minimum of 14 cm to a maximum of 21 cm. Since it is a vise type, size adjustment is easy. Best match for diamond grindstones. As a grindstone holder * Please do not use for anything other than its intended purposeMaterial Base: Rubber, Slide holder: Steel Mass (g) 575 Length (mm) 299 Height (mm) 31, (head part: 7) Width (mm) 70
- SHAPTON KUROMAKU Whetstone with Base* Before using K0711 (# 30000), please be sure to sharpen with K0710 (# 8000).Dimension (mm) 210×70×15 RoHS directive (corresponding to 10 substances) Correspondence
- YAMATO SEITOSYO Oil Whetstone Fine (A Square)The oil grindstone is a bidderized grindstone made from A abrasive grains as the main raw material. Since the material is tough, it is ideal for grinding iron, steel, and other materials with high tensile strength and grinding with a large amount of machining allowance. Unlike the honing whetston... Read MoreAbrasive Grain Size 320 (fine) Abrasive A abrasive (alumina abrasive) Suitable Material Iron, steel, etc. Type Square
- YAMATO SEITOSYO Oil grinding wheel medium (A corner)The oil grindstone is a bidderized grindstone made from A abrasive grains as the main raw material. Since the material is tough, it is ideal for grinding iron, steel, and other materials with high tensile strength and grinding with a large amount of machining allowance. Unlike the honing whetston... Read MoreAbrasive Grain Size 180 (medium eyes) Abrasive A abrasive (alumina abrasive) Suitable Material Iron, steel, etc. Type Square
- DAYTONA Oilstone # 220We have a lineup of recommended tools for disassembly and assembly work, such as incorporating 4 mini-type and scooter-type engine parts that are often sold at Daytona, and for maintenance overhaul!Dimension (mm) 100×25×13 Abrasive Grain Size 220
- CHUKYO KENMA Sand RubberA safe and harmless elastic cleaner born in Germany. Since it is a completely water and oil resistant type, it can be used as a dry wet type depending on the application. It can be used almost where sandpaper can be used. One sand rubber is equivalent to about 50 sheets of sandpaper. For surface ... Read MoreDimensions, Height x Width x Thickness (mm) 80×65×18
- NANIWA (Naniwa Abrasive Mfg) Flattening StoneYou can quickly correct the dents on the grindstone. It can be corrected more smoothly when used in combination with Kongo sand.Abrasive Grain Size #60 Wheel Size (mm) 170×55×30 Mass (g) 500 Abrasive Silicon carbide
- KING King Finishing Whetstone F-3 TypeThis is the finest product made by firing the finest ultra-fine abrasive material developed as a super-finishing blade with a special technology. The quality is always the same, the blade and the grindstone stick well and it is easy to sharpen, and the blade is fast and does not damage the cuttin... Read MoreAbrasive Grain Size # 4000 (for final super finish) Dimension (mm) 185×62×15
- CHUKYO KENMA Oil WhetstoneIt is relatively familiar and can be used in a wide range of areas such as polishing, sharpening, deburring, and miscellaneous research on metals such as molds and cutlery, and non-metals such as glass and jewels.Abrasive Grain A (brown alumina) Suitable Material Metal, glass, jewelry, etc.
- MonotaRO Ceramic fiber grinding wheelA whetstone that is hard to break and clog due to the perfect balance of domestic alumina filaments (abrasive material) and resin. It has excellent heat resistance, and work efficiency can be improved by using an ultrasonic grinding machine. Since the fiber abrasive material grows naturally on th... Read MoreMaterial Alumina fiber
- CHUKYO KENMA Oil Grinding Stone StickFor deburring metal, polishing sculptures, polishing dies, drills, etc. * Please use with kerosene, light oil, machine oil, etc. (Can also be used for water sharpening)Abrasive Abrasive grain (brown alumina) Suitable Material Metal, sculpture, drill, etc.
- NANIWA (Naniwa Abrasive Mfg) Oil whetstone (square whetstone)Used for polishing blades and tools, polishing molds and inner surfaces, etc.Suitable Material Cutting tools and tools Abrasive Fused alumina Specification Square whetstone
- SUN TIGER Oil grinding Asahi tiger whiteUse by impregnating the grindstone with oil. Hard and suitable for precision finishing. Polishing performed manually such as deburring, chamfering, and sharpening blades. It is especially suitable for work that requires a high finish.Abrasive Grain Size #3000 Abrasive A (alumina abrasive)
-
