Board Files
Other Related Pages
- TRUSCO Board FileOne eye is a demon (roughing) and the back is a file (finishing), and the width of the file body makes it ideal for work that requires cutting force. File for processing gypsum board, slate, brick, lightweight concrete, wood and resin.
- Tsubosan Lightweight Board FileBy changing the material to aluminum, the weight has been significantly reduced compared to conventional products. One side is demon eyes (rough cutting) and the other side is file eyes (finishing). The feature is that it is hard to be clogged because the eyes are coarse. For rough finishing of g... Read MoreSuitable Material For plaster board. Overall Length (mm) 190 Blade Width (mm) 35 Thickness (mm) 6
- Tajima (TJM DESIGN) Board file super hardTiger super hard can be scraped. Durability is 10 times that of Onime file Shuttle structure with swinging fine ceramic blade Carbide gypsum board cutting file * Because it is a knife, please handle it with care.Suitable Material Super hard plasterboardfrom S$54.99Min. 2 days
- Tajima (TJM DESIGN) Board file dualThe unique file shape does not clog. Work volume is reduced with a continuous tetra blade that can be scraped by pushing or pulling. Elastomer grip makes it hard to slip and has an easy-to-grip body shape. Lightweight design that does not get tired easily. Maintenance-free, rust-proof file part. ... Read MoreSuitable Material Gypsum board / calcal board Suitable Thickness of Workpiece (mm) Up to 21 (coarse area)
- GISUKE (Takagi) Mentor fileA new board file that does not clog. For cutting and chamfering various boards, slate, wood, resin, etc.Dimension (mm) 300 Material (Grip) PVC Material (Main Unit) SPC-41 (Parker treatment) Suitable Material Various boards, slate, wood, resin, etc.from S$17.99Min. 2 days
- YAMAGUCHI Board file flat demon 250MMTrusco Part No. 811-6899 Thickness (mm) 6 Mass (g) 370 Overall Length (mm) 250 Width (mm) 32from S$38.99Min. 4 days
- Ryuhomaru Board file with chamfering cutterThe'chamfered plane'and'board file' of gypsum board are now in one. Chamfer width dial one-touch adjustment (PAT) Powder keep structure (PAT) that does not scatter powder when filingDimensions, Width W x Height H x Depth D (mm) 55×180×35 Mass (g) 250
- Tajima (TJM DESIGN) Board fileEquipped with a newly developed Tetra blade that enables continuous cutting without clogging. The bidirectional blade allows polishing in both "push and pull" directions, improving workability by about 30% compared to general demon files. Comes with stainless fins. For side cutting of g... Read MoreLength (mm) 148 Thickness (mm) 20 Width (mm) 37 Suitable Material Gypsum board, calc board
- YAMAGUCHI Board file flat demon 350MMThickness (mm) 6 Overall Length (mm) 350 Trusco Part No. 811-6900 Width (mm) 36 Mass (g) 585from S$48.99Min. 3 days
- Tsubosan Board file (demon / medium)One side is demon eyes (rough cutting) and the other side is file eyes (finishing). The feature is that it is hard to be clogged because the eyes are coarse. For rough finishing of gypsum board * If it is clogged, remove it with a brush etc. before use.Thickness (mm) 6 Suitable Material For plaster board. Abrasive Grit Size rasp-cutfrom S$39.99Min. 4 days
- GISUKE (Takagi) Super / extreme rough ZAG flat blade metal bodyShave in a zag. Hard to clog! Speedy grinding! Ideal for rough cutting of gypsum board. Easy! Replaceable blade type. Durable alloy body. Roughing / chamfering of gypsum board, wood, etc. For removing rust and removing paint.Dimension (mm) (Blade) about 139 × 42 Suitable Material Gypsum board, wood, etc.from S$21.99Min. 4 days
- TAKAGI Lightweight 2WAY plasterboard file2WAY type of demon eyes and fine demon eyes. For cutting gypsum board, slate, wood, resin, etc.Type Onimome, Hoshimeme Suitable Material Gypsum board, slate, wood, resin, etc.from S$42.99Min. 4 days
- GISUKE (Takagi) Super / Extreme Rough ZAG Flat Blade Replacement BladeHard to clog! Speedy grinding! Ideal for rough cutting of gypsum board. GISUKE Ultra-rough ZAG flat blade spare blade for metal body. Roughing / chamfering of gypsum board, wood, etc. For removing rust and removing paint.Dimension (mm) (Blade) about 139 × 42 Suitable Material Gypsum board, wood, etc.from S$7.29Min. 4 days
- H&H Board fileFully sharpened finish for cutting gypsum board, slate, wood, resin, etc.Dimension (mm) 250 Material Carbon tool steel (SK-2) Abrasive Grit Size Front: Onimus, Back: Nakamefrom S$29.99Min. 3 days
- YAMAGUCHI Board file flat demon 350Mass (g) 680 Overall Length (mm) 350 Trusco Part No. 811-6901 Thickness (mm) 5 Width (mm) 42from S$58.99Min. 3 days
- H&H Lightweight board fileLight for cutting gypsum board, slate, wood, resin, etc.! Easy workDimension (mm) 250 Material Aluminum / nickel plating Abrasive Grit Size Front: Onimus, Back: Nakamefrom S$27.99Min. 3 days
- Tsubosan Board file 300mmWidth (mm) 32 Overall Length (mm) 300 Trusco Part No. 852-7913 Thickness (mm) 6from S$36.99Min. 5 days
- Tsubo Senkichi Board fileA file for woodworking boards. Can be used for rough finishing for woodwork boards. Grinding and polishing of woodworking boards. * Make sure that the file body is free of chips, cracks, cracks, and cracks. * If used in the opposite direction, it will damage your eyes and shorten the service life... Read MoreAbrasive Grit Size Rough / finish Material SKS-8 or SK-2 Suitable Material Woodworking boardfrom S$49.99Min. 3 days
- Tsubosan Board file 350mm wide typeThickness (mm) 5 Overall Length (mm) 350 Width (mm) 42 Trusco Part No. 852-7916from S$48.99Min. 4 days
- Tsubosan Board file 350mmTrusco Part No. 852-7914 Thickness (mm) 6 Width (mm) 36 Overall Length (mm) 350from S$46.99Min. 4 days
- YAYOI CHEMICAL INDUSTRY Board File Middle Eye TBY-S130CThe unique file shape prevents clogging and uses a new Tetra blade that can be sharpened smoothly in any direction. Stainless steel fins are useful for holding paper on boards and retightening screws. It is small and convenient to carry.Length of File Part (mm) 130from S$46.99Min. 5 days
- Yoita Riki Kogyo Yamaguchi Light Alloy Board File Light Waza-kunIt is a compact and easy-to-carry board file that is light and easy to work with because it is a light alloy. Because it is a light alloy, it is very light and does not rust easily. Ideal for cutting wood, resin, gypsum board, slate, horseshoe, etc. A board file that is convenient for the form. C... Read MoreMaterial Light alloyfrom S$44.99Min. 3 days
- YAYOI CHEMICAL INDUSTRY Board file fine TBY-S130SThe unique file shape prevents clogging and uses a new Tetra blade that can be sharpened smoothly in any direction. Stainless steel fins are useful for holding paper on boards and retightening screws. It is small and convenient to carry.Length of File Part (mm) 130from S$46.99Min. 5 days
- YAMAGUCHI Light alloy board file Double-sided demon (Daemon / Small demon)Double-sided demon file (large) and demon (small). Does not rust. No need to apply oil, maintenance free. It is super lightweight and fits in a work bag. Cutting of gypsum board, slate, wood, resin, horseshoe, etc. * Please press to use. If you use it in the opposite direction, it will damage you... Read MoreWidth (mm) 45 Overall Length (mm) 250 Mass (g) 180Discontinued
- GISUKE (Takagi) Gotokudaira File5 roles per piece (Medium ironwork / Coarse ironwork / Plastic / aluminum board / Woodworking plywood / Single-sided small cut (polishing 90 degree corners)) For iron, brass, plastic, plaster, bamboo, etc.Dimension (mm) 200 Material (Main Unit) SK2Discontinued
- ORIENT (File) Alligator mini board file 150mmSince it has a grip, it is easier to hold than a general board file. Ideal for cutting rough materials such as exterior and interior materials. (Please use gloves)Mass (g) 425 Abrasive Grit Size Middle eyes / Oni eyes Dimensions, Width W x Height H x Depth D (mm) 37.5×250×5.9 Standard Size (mm) 150Discontinued
- ORIENT (File) Board fileIdeal for cutting rough materials such as exterior and interior materials. (Please use gloves) Please use gloves when usingAbrasive Grit Size Middle eyes / Oni eyesDiscontinued
- ORIENT (File) Master of the boardTwo roles, a hammer and a file, in one. File for woodworkingHead dimensions (mm) 22×22×120 Abrasive Grit Size Middle eyes / Oni eyes Dimensions, Width W x Height H x Depth D (mm) 120×335×24 Mass (g) 570Discontinued
- YAYOI CHEMICAL INDUSTRY Mini board fileConvenient for finishing the cut surface of gypsum board. The front side is rough and the back side is fine.Overall Length (mm) 255 Size 150mmDiscontinued
- ESCO File for boardBlade Length 105mm Overall Length (mm) 151 Blade Width 38mm Material Ceramic Surface roughness Fine Shape FlatDiscontinued
- ESCO File for boardBlade Length 130mm Overall Length (mm) 148 Blade Width 38mm Material Ceramic Shape Flat Surface roughness SecondDiscontinued
- ESCO File for boardBlade Length 165mm Overall Length (mm) 180 Blade Width 53mm Material Ceramic Surface roughness Fine / coarse Shape FlatDiscontinued
- ESCO File for boardMass (g) 250 Blade Length (mm) 45 Dimension (mm) 55×180×35 Abrasive Grit Size FineDiscontinued
- ESCO File for boardBlade Length 170mm Overall Length (mm) 180 Blade Width 47mm Material Ceramic Surface roughness Fine / coarse Shape FlatDiscontinued