Pneumatic Drum Pumps
The air type is a type that uses air pressure in a drum can pump that can be inserted into a drum can to discharge liquid. Simply attach the drum can to the base of the drum can and switch the lever with a single touch to discharge the liquid with air pressure. Inhalation draws the liquid with a negative pressure inside the can. It can also be used for liquids with high viscosity, which are difficult with electric and air motor types. Electric motor-type handy pumps are suitable for subdividing and transferring liquids at plating and chemical plants. Air-driven pumps are best for low viscosity liquids. A dedicated chemical pump is also available for transferring flammable fluids such as chemicals.
AS ONE Handy Pneumatic Pump for Transporting Liquid SolutionsAs ONE Part Number 1-7900-15from S$6,699.00Min. 16 days- AQUA SYSTEM Air pressure pumpThis is an air-type drum can closed type discharge pump with a mechanism that inserts air decompressed to 0.05Mpa into the drum can and pushes it out. * We do not deliver to private homes (detached houses / apartments).Trusco Part No. 509-5361from S$2,499.00Min. 6 days
- BLOVAC Blowback DrumSpeed inhalation / speed discharge (200 liters of water for about 2 minutes) One-touch switching between suction and discharge <QTO type> Extensive product lineup Even in explosion-proof areas, you can use a compressor with safe horsepower! Double safety measures (W check of pressure reduci... Read MoreNozzle Length (cm) Φ32×30
- BLOVAC Top plate, lever type band setSpecification 200L open drum top platefrom S$299.90Min. 2 days
- Yamada Corp. Drum Pump for Low ViscosityAn air-driven drum pump that is ideal for pumping and pumping oil from 200L drums. It can also be used for subdividing oil and supplying to hose reels. Installed directly on drum engine oil. (Please purchase the hose and oil gun on the discharge side separately.) * Gasoline, light oil, and kerose... Read MoreMaximum Discharge (mL/min) 52.0 Maximum Pumping Rate (L/min) 29.0 Pump Ratio 1×1 Discharge Port Rc3/4 Trusco Part No. 466-4329 Mass (kg) 5.0 Hose Inner Diameter (Φmm) 19.0from S$779.90Min. 2 days
- BLOVAC Hose Q / Oil Resistant General OilFor general oilMaterial (Main Unit) Aluminum alloy casting Applicable Fluid General oil Material (Hose) Vinyl chloridefrom S$229.90Min. 4 days
- AQUA SYSTEM Air compressor used drum pumpThe air pressure is reduced to 0.025Mpa and placed in a closed drum to compress the liquid level and push out the liquid inside the drum. Since there are no obstacles in the flow path, it is okay to use highly viscous liquids or liquids containing foreign substances, and the water from a single d... Read MoreHose Length (m) 2 Applicable Viscosity (cP) 3000 or less Mass (kg) 4.3 Maximum Pumping Rate (L/min) 55 Suitable Liquid General oil Material (O-ring) Viton
- AQUA SYSTEM Air compressor used drum pumpThe method of pushing out with the air pressure injected under reduced pressure into the can is adopted. It is ideal for discharging high-viscosity liquids and liquids that require explosion-proof measures, which are difficult with electric or air motor types. It is a double safety valve mechanis... Read MoreSuitable Air Pressure (MPa) 0.1～1 compressor 1 horsepower or more (0.75kW) Lifting Height (m) 2 Hose Length (m) 2 Usable viscosity (mPa.s) 3000mPa ・ S or less Trusco Part No. 353-8796 Mass (kg) 5.3 Pumping Rate (L/min) 50 Material (Main Unit) Aluminum Material (Gasket) Fluororubber Material (Hose) Oil resistant rubber Compressed Air Connection Rc1 / 4 (with plug)
- BLOVAC Hose TO, QTO / Oil resistant General oilFor general oilMaterial (Main Unit) Aluminum alloy casting Applicable Fluid General oil Material (Hose) Vinyl chloridefrom S$329.90Min. 4 days
- Yamada Corp. Yamada drum pump DR-50A3It is essentially explosion-proof and safe and secure driving. The discharge pressure can be selected and adjusted in a wide range. For low viscosity (oil). Used for pumping oil from drums, used for pumping oil from drums, for low viscosity (oil) * Gasoline, light oil, and kerosene cannot be used... Read MoreMaximum Operating Pressure (MPa) 0.7 Pump Ratio 3×1 Mass (kg) 5.4 Trusco Part No. 811-7025 Included Accessories Air coupler Material Steelfrom S$869.90Min. 5 days
- YOKOTA INDUSTRIAL Piston PumpA reciprocating pump in which a piston pump is directly connected to a reciprocating motor that operates using compressed air as power. Since there is no loss or contamination due to pumping, various liquids (water, oil chemicals, etc.) can be easily taken out from containers such as drums, inclu... Read MorePiston Diameter (Φmm) 50 Mass (kg) 3.5 (Main unit only) Air Pressure (MPa) 0.5 Air Consumption (L/min ANR) 170-340 (maximum) Suitable Air Pressure (MPa) 0.3～0.5 Stroke (mm) 100 Overall Length (mm) 608from S$879.90Min. 4 days
-
-
-
- BLOVAC For hose G For gasolineFor gasolineMaterial (Main Unit) Aluminum alloy casting Applicable Fluid Gasoline Material (Hose) Nitrile rubberfrom S$779.90Min. 5 days
- AQUA SYSTEM Separate type air vacuum pumpIt is a drum can suction pump with a mechanism that the inside of the drum can becomes negative pressure and is sucked from the outside by inserting air decompressed to 0.4 to 0.6Mpa into the drum can and discharging it from the ejector. Attach the discharge part (the side with the hose) to the l... Read MoreViscosity (mPa s) (Available) 4000 Suitable Air Pressure (MPa) 0.4～0.6 Hose Length (mm) 25×2000 Lifting Height (m) 3 Trusco Part No. 410-0352 Mass (kg) 6.5 Suction Rate (L/min) 68 (at viscosity 1cp) Applicable Fluid General solvent Specification Only for drum cansfrom S$2,599.00Min. 32 days
- BLOVAC For hose S For thinnerFor thinner * Special compound rubber is a hose based on Z-3 rubber with improved thinner resistance.Material (Main Unit) Aluminum alloy casting Material (Hose) Special compound rubber Applicable Fluid thinnerfrom S$1,199.00Min. 5 days
- AQUA SYSTEM Separate type air pressure pumpAn air-type drum can sealed type discharge pump with a mechanism that inserts air decompressed to 0.05Mpa into the drum can and pushes it out. Attach the discharge part (the side with the hose) to the large mouth G2 of the drum can, and the pressurization part (the side with the regulator) to the... Read MoreViscosity (mPa s) (Available) 4000 Suitable Air Pressure (MPa) 0.1～1 Hose Length (mm) 25×2000 Lifting Height (m) 3 Trusco Part No. 410-0361 Discharge Rate (L/min) 70 Mass (kg) 8.5 Specification Dedicated drum can sealed discharge Applicable Fluid General solventfrom S$3,399.00Min. 32 days
- AQUA SYSTEM Use of air compressor + pump for drumsPneumatic pump for closed drums. Since it uses compressed air, it can be used in explosion-proof areas. Uses aluminum and stainless steel. Comes with a nozzle that can be operated with one hand. Discharge is a method of pushing out with air pressure injected under reduced pressure into the can. I... Read MoreSuitable Air Pressure (MPa) 0.1～1 compressor 1 horsepower or more As ONE Part Number 1-3510-01 Hose Length (m) 2 Lifting Height (m) 2 Pumping Rate (L/min) 30 Usable viscosity (mPa.s) 3000 or less Mass (kg) 4.9 Trusco Part No. 455-0285 Material (Main Unit) Aluminum Type Discharge only Material (O-ring) PTFE, fluororubber Material (Hose) Stainless steelfrom S$1,999.00Min. 3 days
- Yamada Corp. Air powered pumpThe combination of an oil drum pump, hose, and oil control valve is ideal for applications such as pumping oil from a drum can and subdividing it, or injecting it in fixed amounts. Insert the oil drum pump into the 2B bang (injection port) of the drum can, fix it with the bang adapter, connect th... Read MoreTrusco Part No. 466-4337 Effective Diameter (Φmm) Air motor / 55.0 Mass (kg) 7.1 (Pump only) Display Air motor / 445mL, Lower pump / 116mL Stroke (mm) 70from S$1,199.00Min. 5 days
- AQUA SYSTEM Pneumatic Drum Pump for Suction APDQ1 SeriesFrom kerosene / light oil to cutting fluid mixed with foreign matter can be collected in drums. It is an explosion-proof type that uses air pressure and does not use electricity at all, so you can rest assured! Efficiently recovers low-viscosity to high-viscosity (3000cP) liquids. Since no motors... Read MoreTrusco Part No. 124-9136 Lifting Height (m) 2 Hose Length (m) 2 Applicable Viscosity (cP) 3000 or less Hose Inner Diameter (Φmm) 32 Mass (kg) 4.3 Suction Rate (L/min) 80 Horsepower [Compressor] 3 horsepower or more Applicable Fluid oilfrom S$1,099.00Min. 3 days
- AS ONE Handy Electric Pump for Transporting Liquid SolutionsAs ONE Part Number 1-7900-14from S$5,899.00Min. 16 days
- Yamada Corp. Single cylinder drum pumpAn air-powered pump for pumping, pumping, and controlling the supply of all fluids from drums, tanks, etc. Centralized control of materials is useful for rationalization by transporting materials by piping in remote factories and production lines and managing materials. If the delivery destinatio... Read Morefrom S$4,399.00Min. 9 days
- AQUA SYSTEM Air piston drum pumpAn air piston type drum pump for high viscosity oil. It can be used at high places and long distances. Since it uses air pressure for power, it can be used with confidence even in an environment where there is a risk of ignition or explosion. It can be used without sealing the drum can. High visc... Read MoreApplicable Viscosity (cP) 20000 or less Trusco Part No. 405-0959 Lifting Height (m) 50 compressor 3 horsepower or more (2.25kW) Suitable Air Pressure (MPa) 1.0 or less Hose Length (mm) 20×2000 Mass (kg) 9.4 Specification Discharge only Applicable Fluid High viscosity oil Discharge Rate (L/min) 15 Compressed Air Connection R1 / 4 (with plug)from S$3,899.00Min. 3 days
- BLOVAC For hose + N / SUS + general solventFor general solventsLength (m) 2 Material (Main Unit) Aluminum alloy casting Material (Hose) Stainless steel Applicable Fluid solventfrom S$1,299.00Min. 5 days
-
-
- AQUA SYSTEM Combined discharge and suction filter cleaner for pneumatic drums (switchable)Discharge rate 140 L / min, suction volume 110 L / min. Safe and secure with air drive. Simply place it on a JIS standard 200L open drum and it will quickly turn into a vacuum cleaner with an air filtration function. For cleaning and reusing cutting oil of machine tools, separating cutting oil an... Read MoreNozzle Ball valve nozzle Type For both discharge and inhalation Suitable Air Pressure (MPa) 0.1～1 Applicable Viscosity (cP) 500 Maximum Lifting (m) 2.5 Discharge Rate (L/min) 140Discontinued
-
-
-
-
-
-
- AQUA SYSTEM Air compressor used drum pumpIt is a very convenient pump that can suck and collect liquid directly into the drum can by simply attaching it to the base of the drum can and connecting it to the air source (1HP or more). Using compressed air of 0.1 to 0.7Mpa, the air inside the drum can is discharged to the outside by the act... Read MoreMaterial (Hose) Oil resistant rubber Trusco Part No. 455-0307 Mass (kg) 4.4 Maximum Suction Volume (L/min) 50 (When viscosity is 1cP) Material Body: Aluminum nozzle: Aluminum Material (O-ring) Viton Hose Length (m) 2 Applicable Viscosity (cP) 3000Discontinued
-
- AQUA SYSTEM Air compressor used drum pumpIt is a very convenient pump that can suck and collect liquid directly into the drum can by simply attaching it to the base of the drum can and connecting it to the air source (1HP or more). Using compressed air of 0.1 to 0.7Mpa, the air inside the drum can is discharged to the outside by the act... Read MoreHose Length (m) 2 Mass (kg) 3.3 Applicable Viscosity (cP) 3000 Trusco Part No. 382-1200 Maximum Suction Volume (L/min) 65 (When viscosity is 1cP) Material Body: Aluminum nozzle: Aluminum Suitable Liquid General oil Material (Hose) Vinyl chloride Material (O-ring) VitonDiscontinued
-
-
