Coolant Pumps
A coolant pump is a pump that is used to circulate coolant fluid in a machine. It is mainly used for the circulation of coolant for machine tools, circulation of cleaning liquid used in cleaning equipment, and filtration equipment. There are two types of structure: self-priming type and immersion type. The self-priming type is often used in small machine tools, and the motor and pump are integrated. On the other hand, the immersion type has a structure in which the motor and pump are separated, so the pump part is installed directly below the liquid level.
TERAL Non Self-priming Low Flow Coolant Pump VKP SeriesUsed by submerging the pump part directly under the liquid level. Correspondence to 6 substances with environmental load under the European RoHS Directive. EU Directive (CE marking). Upgrade to environmental resistance (mist, etc.). We offer a wide range of menus such as long and short legs so th... Read MoreType Flow type, immersion type Frequency (Hz) 50/60 Rated Voltage (V) 200/200-220 Protection Class IP54 Suitable Liquid Coolant liquid Paint Color Munsell N1 (glossy)- Teral Taku (Former Mitsubishi Electric) Coolant Pump (Self-priming Type)By adopting SiC mechanical seal, the life of the shaft sealing device is extended. General machine tools other than grinding, such as lathes, milling machines, drilling machines, and hobbing machines * As the viscosity of the oil used increases, the motor load increases and the amount of discharg... Read MoreFrequency (Hz) 50/60 Standard Compliant with EM1242 Voltage (V) 200/200-220[50/60Hz] Liquid Temperature Range (℃) -20～60 Ambient Temperature (℃) -15 to 40 (no freezing) Dimension LG (mm) 13
- TERAL Self-Priming Low Flow Coolant PumpCompact and lightweight by integrating the motor and pump. It has a self-priming function and can be installed anywhere. Correspondence to 6 substances with environmental load designated by European RoHS. EU directive (CE marking) compliant For circulation of cutting fluid such as machine tools. ... Read MoreType Self-priming Frequency (Hz) 50/60 Standard IEC60034-1 Voltage (V) 200 Voltage (V), at 50 / 60Hz 200/200-220 Protection Class IP54 Suitable Liquid Coolant liquid Paint Color Munsell N1 Dimension KE (mm) 67 Dimension LZ (Φmm) 7
- Teral Taku (Former Mitsubishi Electric) Coolant Pump (Non-self-priming Type)The motor and pump are coaxial, but they have separate structures. There is no suction pipe in the pump part, and it is used by submerging it directly under the liquid level. Unlike the NPJ type, it does not have a mechanical seal, so it is suitable for all machine tools, including grinding machi... Read MoreType Immersion type Frequency (Hz) 50/60 Voltage (V) 200/200-220[50/60Hz] Suitable Liquid Coolant liquid Liquid Temperature Range (℃) -20～60 Ambient Temperature (℃) -15 to 40 (no freezing)
- Hitachi Industrial Equipment Systems Coolant pump (self-priming type)It uses a mechanical structure specially designed as a pump and a class E motor that is durable against cutting fluid. Due to the rational design of the pump part, it has the performance that fully satisfies the standard. For supplying cutting fluid for machine tools If the delivery destination i... Read MoreType Self-priming Number of Poles 2 Power Supply Three-phase Rated Voltage (V) 200、220 Rated Frequency (Hz) 50/60 Protection Class IP44 Suitable Liquid Coolant liquid Paint Color Munsell 8.9Y5.1 / 0.3 (Riguel Gray) Protection Method Fully closed typefrom S$339.90Min. 2 days
- Hitachi Industrial Equipment Systems Coolant Pump (Non-self-priming Type)It uses a mechanical structure specially designed as a pump and a class E motor that is durable against cutting fluid. Due to the rational design of the pump part, it has the performance that fully satisfies the standard. For supplying cutting fluid for machine tools If the delivery destination i... Read MoreType Immersion type Number of Poles 2 Power Supply Three-phase Rated Voltage (V) 200、220 Rated Frequency (Hz) 50/60 Protection Class IP44 Suitable Liquid Coolant liquid Paint Color Munsell 8.9Y5.1 / 0.3 (Riguel Gray) Protection Method Fully closed type
- TERAL Self-Priming Low Flow Coolant Pump VKN SeriesCompact and lightweight by integrating the motor and pump. It has a self-priming function and can be installed anywhere. Correspondence to 6 substances with environmental load under the European RoHS Directive. Upgrade to environmental resistance (mist, etc.). The pressure type has a pressure inc... Read Morefrom S$389.90Min. 2 days
- TERAL Submerged low pressure coolant pump VKP seriesUsed by submerging the pump part directly under the liquid level. Correspondence to 6 substances with environmental load under the European RoHS Directive. EU Directive (CE marking). Upgrade to environmental resistance (mist, etc.). We offer a wide range of menus such as long and short legs so th... Read MoreFrequency (Hz) 50/60 Rated Voltage (V) 200/200-220 Protection Class IP54from S$1,199.00Min. 3 days
- Fuji Electric Coolant pumpThe pump part is made of reinforced plastic, gunmetal, A spiral pump that is extremely resistant to rust!Type Swirl pump Frequency (Hz) 50/60 Voltage (V) 200[50Hz]/200-220[60Hz] Suitable Liquid Coolant liquid Paint Color Dark Grin FM Material (Pump Housing) plastic Standard pipe diameter G1/2from S$1,299.00Min. 22 days
- Kawamoto Pump Immersion type multistage coolant pumpFCD500 is used for the pump material and a unique sand step structure is used for the casing to realize a tough pump structure. The unique mechanical sealless structure has improved the sealing performance. It is possible to support various specifications (CE, RoHS, child finger tropical passage ... Read MoreSpecification Impeller FC200, casing FCD500 Type Immersion type coolant pump Output (kW) 2.2 Number of Poles 2-pole Frequency (Hz) 50/60 combined use Power Input (V) Three-phase 200 Discharge Rate (L/min) 300 Suitable Liquid Coolant liquid Electric Motor Fully enclosed external fan indoor type Structure (Shaft Seal) Sealless shaft seal Protection Method Fully enclosed external fan indoor type Pump nominal diameter (suction x discharge) 40×40mmfrom S$4,799.00Min. 5 days
- TERAL VKB type coolant pumpCoolant pump, multi-stage, 2-pole, energy-saving pump equipped with a coupling-directed top-runner efficiency (equivalent to IE3) motor. (VKB-e type) Uses a non-seal (mechanical seal-less) structure. It complies with the 10 substance regulations of the RoHS Directive (2011/65/EU). Compliant with ... Read MoreFrequency (Hz) 50/60 Rated Voltage (V) 50Hz：200、60Hz：200/220 Rated Current (A) 50Hz：7.4、60Hz：10.0/9.1 Discharge Rate (L/min) 50Hz：40、60Hz：50 Casing Number: 13 Starting Current (A) 50Hz ：64、60Hz：54.0/59.0 Feature Pressure type Nominal output (kW) 50Hz：0.9、60Hz：1.53 Number of Impellers 9from S$2,999.00Min. 3 days
- TERAL Coolant pumpResistant to dirty liquids. Adoption of impeller material FCD provides excellent durability. The operating water level can be freely set by installing the suction pipe. For low viscosity liquid * It can be operated with a liquid containing additives (rust preventive, etc.) such as water-soluble a... Read MoreType Immersion type Frequency (Hz) 50 Opening Diameter (Φmm) 40 Pumping Rate (L/min) 80～250 Paint Color Munsell N1.5 Heat Resistance Class E Viscosity (cSt) 32 (use limit) Ambient Temperature (℃) 40 or less Power Supply (Motor) (V) Three-phase 200 Poles of Motor 2 Protection Method Totally enclosed fan Synchronous rotation speed (min -1 [rpm]) (Electric motor) 3000Discontinued
- TERAL High pressure coolant pump VKD series-The pump part is very sturdy and resistant to dirty liquids. -Adopts a new mechanical sealless structure. -High pressure and large capacity pump characteristics. (max500L / min)・ European RoHS Directive Correspondence to 6 substances with environmental load.Discontinued
- TERAL Low pressure coolant pump (submersible type)It complies with the European RoHS Directive and EU Directive (CE marking). The motor and pump are integrated to reduce size and weight. The connection of the lead wire is fixed to the terminal block. For circulation of cutting fluid for machine tools, etc. Cooling system circulation. * Products ... Read MoreType Flooded type Rated Power Supply 200/200～220VDiscontinued
- TERAL LPW coolant pumpIt is a non-mechanical seal structure that does not have a seal between the motor and the pump. Strong against air kami. It can also be used for high-viscosity liquids. No need for safety valves, relief pipes, or three-way valves. For cooling cutting tools. For cleaning cutting machines, etc. For... Read MoreSpecification Immersion type Discharge Rate (L/min) 80～300 Rated Power Supply 200VDiscontinued
- TERAL Multistage high pressure coolant pump VKB series-Adopts a mechanical sealless structure.・ European RoHS Directive Correspondence to 6 substances with environmental load. -Compliant with European standards. EU directive (CE marking), IEC standard compliant terminal box, child finger compliant fan cover. -Adopts an impeller for high-frequency o... Read MoreDiscontinued
- TERAL Multistage high pressure coolant pump VKA seriesUses a highly durable mechanical seal. Compliant with 6 substances of environmental impact in the European RoHS Directive. Conforms to European standards. Terminal box compatible with EU directives (CE marking), IEC standards, fan cover compatible with child fingers. Upgraded to environmental res... Read MoreDiscontinued
