All Category

Heating Units

Other Related Pages

View : Grid List
Filter

26 Item(s)

Set Ascending Direction
  1. Peltier cooling trial kit
    Sakaguchi E.H VOC Peltier cooling trial kit
    from S$589.90
    Min. 6 days
  2. Sakaguchi Peltier Kit SPE-UC-100
    Sakaguchi E.H VOC Sakaguchi Peltier Kit SPE-UC-100
    Power Consumption (VA)  (Maximum) 150  Endothermic amount (W)  (Maximum) 33  Operating Temperature Range (℃)  -50 to 150 or less  Temperature Display Accuracy  0.1℃  Rated Current (A)  10  Mass (kg)  2.6  Plate Dimensions (mm)  80×80  Input Voltage (V)  AC100(85-132)  Motor Rating  DC12V/0.21A  Rated Voltage (V)  DC14  Type of Control  PID type voltage suppression method  Output Current (A)  Peltier side: (Maximum) 10  Output Voltage (V)  Peltier side: (Maximum) DC14  Accuracy (℃)  ± 0.3 or ± 0.5% of set value 
    from S$3,299.00
    Min. 6 days
  3. Hot air beam controller
    HAKKO (Hakko Electric) Hot air beam controller
    Since the pressure gauge is built in the main body, it can be easily controlled. It has a built-in flow rate limit switch. If there is no air supply, the heater will not operate, so you can use it with confidence. It has a built-in temperature controller. From monitoring the air temperature to fi... Read More
    Main Unit Dimensions, Width W x Depth D x Height H (mm)  230×210×198  Hysteresis  3℃  Specification  Front connection method  Air Pressure (MPa)  Input: 0.4-1
    Output: 0.1-0.3 
    Suitable for  K type thermocouple  Terminal Screw  M4  Temperature Control  ON/OFF control  Driving System  SSR (Solid State Relay) switching  Type  Standard  Temperature Display Accuracy  ±(0.5%F.S.+1digit)  Room Temperature Correction Accuracy  ±2℃(5~40℃) 
    from S$3,299.00
    Min. 4 days
  4. Far infrared heater
    Sakaguchi E.H VOC Far infrared heater
    from S$56.99
    Min. 6 days
  5. Coil fin heater
    Sakaguchi E.H VOC Coil fin heater
    Dimension D (Φmm)  12  Sheath Outer Diameter (Φmm)  12  Dimension B (mm)  30 
    from S$46.99
    Min. 6 days
  6. Hot air generator
    HAKKO (Hakko Electric) Hot air generator
    It has excellent durability. Even though it is small, it has high capacity and excellent safety. Supports 150 ° C circulation use.
    Terminal Screw  M3.5  Specification  With controller  Type of Control  PID control method (SSR drive)  Earth Terminal  M4  Installation Posture  Horizontal  Motor Type  Condenser induction motor  Temperature Sensor  K type thermocouple  Cable Size (mm2 3.5  Cable Specification, Type  VCT  Heater Type  Seeds heater  Cable Length (m)  Intake Gas Temperature (℃)  -10~150  Mounting Hole  4-7 × 14 round length 
    from S$3,899.00
    Min. 5 days
  7. Sealing nozzle NM
    HAKKO (Hakko Electric) Sealing nozzle NM
    from S$56.99
    Min. 16 days
  8. Sakaguchi Peltier Kit SPE-UC-200
    Sakaguchi E.H VOC Sakaguchi Peltier Kit SPE-UC-200
    Power Consumption (VA)  (Maximum) 150  Endothermic amount (W)  (Maximum) 64  Operating Temperature Range (℃)  -50 to 150 or less  Temperature Display Accuracy  0.1℃  Plate Dimensions (mm)  140×70  Mass (kg)  2.6  Rated Current (A)  Input Voltage (V)  AC100(85-132)  Rated Voltage (V)  DC12  Motor Rating  DC12V:/0.14A(MAX)×2  Type of Control  PID type voltage suppression method  Output Current (A)  Peltier side: (Maximum) 10  Output Voltage (V)  Peltier side: (Maximum) DC14  Accuracy (℃)  ± 0.3 or ± 0.5% of set value 
    from S$4,899.00
    Min. 6 days
  9. Croton
    HAKKO (Hakko Electric) Croton
    It is integrally molded with epoxy glass, which has excellent heat resistance and chemical resistance, and has excellent durability. A graft carbon baku surface heat element is used for the heat generating element, and the power-saving structure provides a quick temperature rise and heat retentio... Read More
    Thickness (mm)  1.8  Regular Temperature (℃)  40 or less (liquid temperature)  Material  Epoxy resin impregnated glass cloth 
    from S$329.90
    Min. 16 days
  10. Bottom heater GOEMON-150D (with insulation cover)
    ThreeHigh Bottom heater GOEMON-150D (with insulation cover)
    A heating / heat retaining heater (with a heat insulating cover) exclusively for pail and itto cans that can heat up to 4 cans at the same time. Energy-saving design because it heats efficiently at the bottom. Easy and safe design that anyone can use. RoHS compliant product Heater / heat retentio... Read More
    from S$4,599.00
    Min. 24 days
  11. Oil heating unit
    HAKKO (Hakko Electric) Oil heating unit
    It can be used simply by connecting the piping and connecting the power supply (three-phase 200V). The legs for installation are removable. The heating element is durable and structurally robust. A thermometer can be attached.
    Maximum Operating Pressure (MPa)  0.3  Thermal Fuse  139 ° C (overheating prevention)  Temperature Control Range (℃)  33~120  Temperature Control  Liquid expansion thermostat  Dimension E  Rp1  Dimension D  Rp1  Material (Pipe)  SGP  Material (Main Unit)  SPCC (paint)  Voltage (V)  Three-phase 200 
    Rating:
    100%
    from S$1,699.00
    Min. 5 days
  12. Bottom heater GOEMON-150 (without insulation cover)
    ThreeHigh Bottom heater GOEMON-150 (without insulation cover)
    A heating / heat retention heater exclusively for pail and itto cans that can heat up to 4 cans at the same time. Energy-saving design because it heats efficiently at the bottom. Easy and safe design that anyone can use. RoHS compliant product Heater / heat retention heater for pail cans and itto... Read More
    from S$3,799.00
    Min. 17 days
  13. Stainless water heating unit
    HAKKO (Hakko Electric) Stainless water heating unit
    A clean and durable water heating unit that uses a stainless steel plug heater as a heating element. The heater and tube of the wetted parts are all stainless steel. The heating element uses a stainless plug heater of Yakko standard product. Since the surface is electropolished, it has excellent ... Read More
    Internal Capacity (L)  (Tube) 3.1  Maximum Operating Pressure (MPa)  0.1  Inspection pressure (MPa)  0.4  Capacity (kW)  10  Mass (kg)  12  Minimum Flow Rate (L/h)  120  Dimension E (mm)  216  Liquid Expansion Thermostat  30~80℃  Dimension C (mm)  35  Dimension B (mm)  510  Dimension D (mm)  575  Density of Effective Heating Area (W/cm2 7.5  Maximum Operating Temperature (℃)  80  Trusco Part No.  827-9086  Dimension A (mm)  858  Dimension G  Rp3/4  Dimension F  Rp3/4  Voltage (V)  Three-phase 200 
    from S$3,799.00
    Min. 5 days
  14. Water heating unit
    HAKKO (Hakko Electric) Water heating unit
    A clean and durable water heating unit that uses a stainless steel plug heater as a heating element. It has excellent durability and only the heating element can be replaced. It is safe because it is equipped with a thermostat for setting the upper limit temperature and a thermal fuse. Since the ... Read More
    Material (Pipe)  SUS304 (stainless steel)  Surface Treatment  Electrolytic polishing (sheath)  Voltage (V)  Three-phase 200  Liquid Expansion Thermostat  30~80℃  Maximum Operating Temperature (℃)  80  Material (Heater Sheath)  SUS316L (stainless steel)  Maximum Operating Pressure (MPa)  0.3  Material (Cover)  Iron (painted) 
    from S$1,999.00
    Min. 5 days
  15. Hot air generator 2000 series
    HAKKO (Hakko Electric) Hot air generator 2000 series
    from S$7,799.00
    Min. 5 days
  16. Hot air generator
    HAKKO (Hakko Electric) Hot air generator
    from S$3,899.00
    Min. 5 days
  17. Mounting parts for far infrared heater [Safety holder + NO.5]
    Sakaguchi E.H VOC Mounting parts for far infrared heater [Safety holder + NO.5]
    A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.
    Dimension F (mm)  10  Dimension H (mm)  18  Dimension G (mm)  20.5  Dimension D (Φmm)  23  Dimension C (mm)  25.5  Dimension L (mm)  26  Dimension B (mm)  31  Dimension A (mm)  40.5  Dimension J (mm)  5.5  Dimension K (mm)  50.5  Dimension E (mm)  72  Type  Size  Insulator: Large  Dimension M1 (mm)  M5×20L  Dimension M2 (mm)  M6×30L 
    from S$7.69
    Min. 7 days
  18. Hot air generator "Micro cable air heater"
    Sakaguchi E.H VOC Hot air generator "Micro cable air heater"
    Due to the special structural design using a sheath heater for the heating element, the heating efficiency of gas has been greatly improved. Due to the special internal structure, the surface temperature of the pipe body has been reduced. An energy-saving type heater that reduces power consumptio... Read More
    Insulation Resistance (MΩ)  (DC500V) 5 or more  Maximum Operating Temperature (℃)  500 (with built-in thermocouple)  Flow rate (NL / min)  20~100  Lead Wire Length (mm)  (Heater / Uncut) 500  Voltage (V)  200 
    from S$1,799.00
    Min. 6 days
  19. Electric steam generator
    HAKKO (Hakko Electric) Electric steam generator
    Clean and safe. Since it is heated by an electric heater, it is clean without exhaust gas. It is easy to operate and can be used safely with fully automatic control. Energy Conservation. It can be used in 10 minutes after switching on. Thermal efficiency has been further improved by special heat ... Read More
    Maximum Operating Pressure (MPa)  0.5  Dimension (mm)  450×650×1230  Type  For pure water  Voltage (V)  Three-phase 200 
    from S$16,990.00
    Min. 16 days
  20. Mounting parts for far-infrared heater [Safety holder + NO.7]
    Sakaguchi E.H VOC Mounting parts for far-infrared heater [Safety holder + NO.7]
    A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.
    Dimension H (mm)  10  Dimension D (Φmm)  12  Dimension C (mm)  14  Dimension G (mm)  15  Dimension L (mm)  16  Dimension B (mm)  21  Dimension K (mm)  30.5  Dimension A (mm)  31  Dimension E (mm)  42.5  Dimension J (mm)  6.5  Dimension F (mm)  Type  Size  Insulator: Small  Dimension M1 (mm)  M3×10L  Dimension M2 (mm)  M4×20L 
    from S$6.49
    Min. 7 days
  21. Mounting parts for far-infrared heater [Safety holder + NO.3]
    Sakaguchi E.H VOC Mounting parts for far-infrared heater [Safety holder + NO.3]
    A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.
    Dimension F (mm)  10  Dimension D (Φmm)  12  Dimension L (mm)  13  Dimension H (mm)  13  Dimension G (mm)  20.5  Dimension K (mm)  22  Dimension C (mm)  25.5  Dimension B (mm)  31  Dimension A (mm)  40.5  Dimension E (mm)  43.5  Dimension J (mm)  8.5  Type  Size  Insulator: Large  Dimension M1 (mm)  M5×20L  Dimension M2 (mm)  M6×30L 
    from S$4.39
    Min. 7 days
  22. Hot air generator (with inverter)
    HAKKO (Hakko Electric) Hot air generator (with inverter)
    from S$5,899.00
    Min. 5 days
  23. Straight heater SUS304
    Sakaguchi E.H VOC Straight heater SUS304
    from S$139.90
    Min. 6 days
  24. Hot air beam
    HAKKO (Hakko Electric) Hot air beam
    The hot air beam is a heater for gas heating that has excellent high temperature durability and uses a cykan heater, cartridge heater, etc. as a heating element. The housing is resistant to heat and mechanical shock, and provides stable heat.
    Heater Dimensions (mm)  (Cartridge) Total length: 1135  Power Cable (m)  0.3  Continuous Use Temperature (℃)  500 (Air temperature)  Highest Temperature (℃)  600 (Air temperature)  Type  Material (Main Unit)  SUS304  Included Accessories  Sensor: K type thermocouple 
    from S$1,699.00
    Min. 6 days
  25. Mounting parts for far-infrared heater [Safety holder + NO.8]
    Sakaguchi E.H VOC Mounting parts for far-infrared heater [Safety holder + NO.8]
    A safety holder for fixing the far-infrared heater. Please choose according to the cap size of the selected far-infrared heater.
    Dimension F (mm)  10  Dimension H (mm)  18  Dimension G (mm)  20.5  Dimension L (mm)  21  Dimension D (Φmm)  23  Dimension C (mm)  25.5  Dimension B (mm)  31  Dimension A (mm)  40.5  Dimension K (mm)  43  Dimension J (mm)  5.5  Dimension E (mm)  64.5  Type  Size  Insulator: Large  Dimension M1 (mm)  M5×20L  Dimension M2 (mm)  M6×30L 
    from S$7.69
    Min. 7 days
  26. Hot air generator 2000 series
    HAKKO (Hakko Electric) Hot air generator 2000 series
    A lightweight household step stool with a simple design. For indoor cleaning, light bulb replacement, picking, etc.
    Top Plate Height (m)  0.79  Maximum working mass (kg)  100  Trusco Part No.  211-5990  Top Plate Dimensions (mm)  259×169  Number of Tiers  Material / Finish  Aluminum alloy 
    Discontinued
View : Grid List
Filter

26 Item(s)

Set Ascending Direction