Electromagnetic Pumps
A magnet pump is a pump that uses a magnet to connect the power section and the pump section. Without connecting the motor shaft and the impeller inside the pump directly, movement is transmitted between the motor and the impeller via a magnet, so there is no leakage or corrosion from the motor shaft. Another feature is that there is no need to replace dirt around the pump or mechanical seal. Since there is no risk of liquid leakage, it can be used for seawater circulation or chemical liquid circulation if the pump material is compatible.
Other Related Pages
SANSO ELECTRIC Magnet pump (for chemical seawater)High performance and energy saving 35% improvement in pump efficiency compared to conventional products. It is smaller and lighter, with noise reduced by 5db and vibration reduced by 50%. Long-life liquid leakage-free Magnet pump is a pump without a shaft seal. Since it is made of resin without a... Read MoreSuitable Liquid Seawater / chemical liquid Liquid Temperature Range (℃) 0～60 Installation Location For indoor installation Allowable Boost Pressure (kPa) under 100from S$649.90Min. 6 days- ELEPON E.C.A.P. Magnet drive sealless pumpA sealless centrifugal pump made of polypropylene with excellent corrosion resistance for the wetted parts and the main part of the pump. It can be used for almost all types of chemicals for both small and medium-sized models. Demonstrates excellent performance in transferring perishable fluids s... Read MoreFrequency (Hz) 50/60 Power Input (V) Single phase 100 Voltage (V) 100 Rotational Speed (min -1 [rpm]) 50Hz：2800
60Hz：3380 Power Supply 100V single phase Motor Drip-proof protection type Suitable Liquid Chemical solution (acid, alkali, etc.) Fluid Temperature (℃) 60 Liquid Temperature Range (℃) 0～60 Material (O-ring) Viton Applicable Fluid Temperature (℃) 60 Material (Casing) Polypropylene (PP) Material (Pump Shaft) Ceramic Transfer Liquid Temperature (℃) 60 Material (Bearing) PTFE Maximum Liquid Temperature to Use (℃) 60 Material (Thrust Bearing) Ceramic Liquid temperature (℃) 60from S$1,299.00Min. 4 days - SANSO ELECTRIC Magnet pump (for hot water)Since the resin parts use modified PPO (with glass), it is ideal for cold water to high temperature water. Since it is compact and has a high lift (high pressure), it is economical because it is compact and has a sufficient discharge rate even if the piping resistance is large. The motor has high... Read MoreSpecific Gravity 1.1 or less Liquid Temperature Range (℃) -20～90 Installation Location For indoor installation Allowable Boost Pressure (kPa) under 100
- SANSO ELECTRIC Magnetic Drive Pump (for Chemical and Seawater) High Head TypeHigh performance and energy saving 35% improvement in pump efficiency compared to conventional products. It is smaller and lighter, with noise reduced by 5db and vibration reduced by 50%. Long-life liquid leakage-free Magnet pump is a pump without a shaft seal. Since it is made of resin without a... Read MoreFrequency (Hz) 50/60 Voltage (V) 100 Maximum Flow Rate (L/min) 11/11 Power Consumption, at 50/60Hz (W) 18・20 Hose Diameter (Φmm) 14A Suitable Liquid Seawater / chemical liquid Motor Voltage (V) 100 Liquid Temperature Range (℃) 0～60 Installation Location For indoor installation Allowable Boost Pressure (kPa) under 100 Rated output (W) (50Hz / 60Hz) 4/6 Maximum pumping volume (L / min) (50Hz / 60Hz) 11・11
- Taisan Industrial Electromagnetic PumpThe AC power supply is half-wave rectified by a rectifying element (diode) and applied to the coil to generate intermittent magnetic force to move the brander up and down. * We do not deliver to private homes (detached houses / apartments).Voltage (V) AC100 Applicable Voltage (V) AC100V 50/60Hz
- Enomoto Micro Pump Mfg. DC Motor Type Small Liquid PumpThe diaphragm and valve are integrated to achieve a lightweight and compact design. Since it has self-priming capability, no priming is required.Type of Piping Fitting / Φ5.5mm hose end Discharge pressure (kPa) 30 or more Material (Wetted Part) EPDM / PBT resin
- SANSO ELECTRIC Magnet pump (for chemical seawater) High head typeHigh performance and energy saving 35% improvement in pump efficiency compared to conventional products. It is smaller and lighter, with noise reduced by 5db and vibration reduced by 50%. Long-life liquid leakage-free Magnet pump is a pump without a shaft seal. Since it is made of resin without a... Read MoreFrequency (Hz) 50/60 Suitable Liquid Seawater / chemical liquid Liquid Temperature Range (℃) 0～60 Installation Location For indoor installation Allowable Boost Pressure (kPa) under 100
- SANSO ELECTRIC Magnetic Drive Pump (for Chemical and Seawater) Single Phase 200V TypeHigh performance and energy saving Long life No liquid leakage Completely expelling liquid leakage Abundant models Fully enclosed indoor motors Union standard equipment for PVC piping A dedicated union joint for screw connection type is attached. (13A and 16A can be connected to the pump diameter... Read MoreFrequency (Hz) 50/60 Voltage (V) Single phase 200 Suitable Liquid Seawater / chemical liquid Number of Phases Single-phase Motor Voltage (V) Single phase 200 Liquid Temperature Range (℃) 0～60 Installation Location For indoor installation Allowable Boost Pressure (kPa) under 100from S$379.90Min. 6 days
- SANSO ELECTRIC DC Brushless PumpA small pump for liquid delivery driven by 24V DC.Rated Voltage DC24V Connection Suction / discharge Φ15mm
- SANSO ELECTRIC Self-priming magnet pump (for chemical seawater)Ultra-low noise and ultra-high efficiency By adopting a novel self-priming structure, the pump efficiency and noise value are almost the same as the manufacturer's non-self-priming PMD type magnet pump (before the self-priming tank is placed), and the ultra-low noise and ultra-efficiency Real... Read MoreSuitable Liquid Seawater / chemical liquid Liquid Temperature Range (℃) 0～60 Installation Location For indoor installation Allowable Boost Pressure (kPa) under 100 Suction diameter (Φmm) 1Bfrom S$649.90Min. 2 days
- AS ONE Self-priming Magnetic PumpSince it is a self-priming type, it can be used immediately just by injecting priming water (self-priming up to 2m). There is no need to worry about liquid leakage due to the magnet drive type pump without shaft seals.Type Self-priming magnet pump Power Input (V) 100 Operating Temperature (℃) 0～40 Priming water Required only for the first time Hose connection diameter (Φmm) 20from S$679.90Min. 4 days
- AS ONE Small Chemical Resistant Gear Pump* We do not deliver to private homes (detached houses / apartments).Connection Size Outer diameter Φ6.4 × 19mm Power Input (V) AC100 (50 / 60Hz, 2P plug)from S$879.90Min. 2 days
- ELEPON E.C.A.P. Sealless pumpThere is no liquid leakage from the pump casing due to the magnet drive system. A wide range of variations allows detailed selection. PP (polypropylene), which has excellent corrosion resistance, is used as the main material. The structure is simple and has few parts, so maintenance is easy.from S$899.90Min. 3 days
- ELEPON E.C.A.P. Magnet drive sealless pumpA sealless centrifugal pump made of polypropylene with excellent corrosion resistance for the wetted parts and the main part of the pump. It can be used for almost all types of chemicals for both small and medium-sized models. Demonstrates excellent performance in transferring perishable fluids s... Read MoreFrequency (Hz) 50/60 Power Input (V) Single phase 100 Voltage (V) 100 Rotational Speed (min -1 [rpm]) 50Hz：2800
60Hz：3380 Power Supply 100V single phase Motor Drip-proof protection type Rated Output (W) 200 Rated Output (kW) 0.2 Suitable Liquid Chemical solution (acid, alkali, etc.) Fluid Temperature (℃) 80 Liquid Temperature Range (℃) 0～80 Material (O-ring) Viton Applicable Fluid Temperature (℃) 80 Material (Casing) Polypropylene (PP) + glass fiber Material (Pump Shaft) Ceramic Transfer Liquid Temperature (℃) 80 Material (Bearing) PTFE Maximum Liquid Temperature to Use (℃) 80 Material (Thrust Bearing) Ceramic Rated Motor Output (W) 200 Liquid temperature (℃) 80from S$1,699.00Min. 3 days - SANSO ELECTRIC Self-priming magnet pump (for chemical seawater) high head typeUltra-low noise and ultra-high efficiency By adopting a novel self-priming structure, the pump efficiency and noise value are almost the same as the manufacturer's non-self-priming PMD type magnet pump (before the self-priming tank is placed), and the ultra-low noise and ultra-efficiency Real... Read MoreFrequency (Hz) 50/60 Maximum Flow Rate (L/min) 40/45 Discharge Diameter (Φmm) 3/4B Suitable Liquid Seawater / chemical liquid Liquid Temperature Range (℃) 0～60 Installation Location For indoor installation Allowable Boost Pressure (kPa) under 100 Opening Diameter (Union fitting) 16A / 20A Suction diameter (Φmm) 1B Maximum pumping volume (L / min) (50Hz / 60Hz) 8-32・12-22/10-39・16-27from S$979.90Min. 6 days
-
-
-
-
- SANSO ELECTRIC Electromagnetic Pump (for Chemical and Seawater)35% improvement in pump efficiency compared to conventional manufacturers. It is smaller and lighter, with noise reduced by 5db and vibration reduced by 50%. It is a pump without a shaft seal and is made of resin with no liquid leakage, so it is suitable for transferring highly corrosive special ... Read MoreFrequency (Hz) 50/60 Motor Fully closed indoor motor Specific Gravity 1.1 or less Suitable Liquid Seawater / chemical liquid Liquid Temperature Range (℃) 0～60 Installation Location For indoor installation Working Ambient Temperature (℃) 0～40 Allowable Boost Pressure (kPa) under 100
- Sanwa Hydrotech Stainless steel magnet pumpThe magnet pump is a completely leak-free pump.Material (Main Unit) SCS13(SUS304) Frequency (Hz) 50 Voltage (V) 100 Temperature Range (℃) -20～130 Motor Type Single phase induction Motor Output (kW) 0.0.25 Discharge Diameter (Φmm) 12(R1/2) Discharge Rate (L/min) 10 Specific Gravity 1 Viscosity Less than 10 cSt Explosion-proof Structure Non-explosion proof Motor Voltage (V) 100 Suction Port Diameter (Φmm) 14(R1/2) Maximum Liquid Temperature to Use (℃) 130 Design pressure (MPaG) 0.6Discontinued
-
- Nichihatsu Jabsco Magnet pump NEMP seriesWet contact part completely non-metal. Compatible with highly corrosive chemicals. Compliant with international standards (various IP, CE, UL), continuous operation is possible without liquid leakage.Fluid Temperature (℃) -20～+85Discontinued
- Nichihatsu Jabsco Magnet pump DC15 / 5Wet contact part completely non-metal. Compatible with highly corrosive chemicals. Compliant with international standards (various IPs, CE).Maximum Flow Rate (L/min) 23.0 Fluid Temperature (℃) -20～+85 Port Diameter (Φmm) 13Discontinued
-
- SANSO ELECTRIC Casing (hose)Suitable Model For PMD-641B2F Opening Diameter (Hose) 26AmmDiscontinued
- TOHKEMY Small magnet pump TSN typeHigh reliability and long life design faithful to the basics. Series configuration that can meet various demands.Frequency (Hz) 50/60 sharedDiscontinued
- Nichihatsu Jabsco Magnet pump DC40 / 10Wet contact part completely non-metal. Compatible with highly corrosive chemicals. Compliant with international standards (various IPs, CE). Continuous operation is possible without liquid leakage.Maximum Flow Rate (L/min) 55.0 Fluid Temperature (℃) -20～+85 Port Diameter (Φmm) 21Discontinued
- Nichihatsu Jabsco Magnet pump DC30 / 5Wet contact part completely non-metal. Compatible with highly corrosive chemicals. Compliant with international standards (various IPs, CE).Maximum Flow Rate (L/min) 35.0 Fluid Temperature (℃) -20～+85 Port Diameter (Φmm) 21Discontinued
- SANSO ELECTRIC Self-priming magnet pump (for chemical seawater)A magnet pump with ultra-low noise, ultra-high efficiency, and a removable self-priming tank structure. Since the sealless structure is based on the magnet coupling method, there is no leakage or corrosion of the pump, and there is no need for dirt around the pump or replacement of the mechanical... Read MorePower Supply AC100V・50/60Hz Operating Environment 0～40℃ Liquid Temperature Range (℃) 0～60 Connection Bore Diameter (Φmm) 25Discontinued
