All Category

Full Face Flange Gaskets

Full-face packing for flanges is a sealing material that is sandwiched between two flanges (disk-shaped parts for connecting pipes). It covers the entire surface of the flanges and has holes for bolts, just like the flanges. . Various materials such as natural rubber, Teflon, and non-asbestos joint sheets are available for full-face gaskets for flanges, and each material has different uses and resistance, so it is necessary to read the notes carefully before purchasing. Of course, let's check the size and number of bolt holes that fit.
View : Grid List
Filter

Items 1 - 40 of 139

Set Ascending Direction
  1. Eslon packing EPDM
    SEKISUI Eslon packing EPDM
    Has excellent chlorine resistance. High sealing performance with double round protrusions. High sealing performance with low tightening torque. General industrial piping
    Maximum Operating Temperature (℃)  100  Nominal Pressure  10K  Operating Pressure  10K  Thickness (mm)  Material  Ethylene propylene rubber (EPDM)  Type  JIS10K 
    Rating:
    97%
    from S$3.99
    Min. 2 days
  2. AV Full Face Type Gasket
    ASAHI AV AV Full Face Type Gasket
    Since it is an integrally molded product, there is no uneven thickness and the surface is smooth. Since there are two O-ring-shaped protrusions, it will not leak even if the surface pressure is low. Since the hardness of the rubber is appropriate, it can buffer against thermal stress and piping s... Read More
    Nominal Pressure  10K  Standard  10K  Dimension t (mm)  RoHS directive (corresponding to 10 substances)  Correspondence  Material  EPDM (ethylene propylene rubber), etc. 
    Rating:
    100%
    from S$3.59
    Min. 2 days
  3. Full face packing for flange (for steam)
    VALQUA Full face packing for flange (for steam)
    A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read More
    Tensile Strength (MPa)  (Horizontal direction) 12.5  Flexibility  (Vertical direction) 12  Operating Temperature Range (℃)  -50~214  Compression Ratio (%)  10 (at 34.3MPa)  Density (kg/m3 1759  Thickness (mm)  Return Ratio (%)  64 (at 34.3MPa)  Type  Full face packing for flange  Feature  Heat-resistant  Material  Non-asbestos 
    Rating:
    96%
    from S$4.89
    Min. 2 days
  4. Full face packing for flange (EPDM rubber) (10K)
    Osaka Spirit Full face packing for flange (EPDM rubber) (10K)
    A rubber material with weather resistance and high heat resistance. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure... Read More
    Maximum Operating Pressure (MPa)  Nominal Pressure  10K  Maximum Operating Temperature (℃)  120  Thickness (mm)  Material  EPDM (ethylene propylene rubber) 
    Rating:
    85%
    from S$1.69
    Min. 2 days
  5. Full face packing for flange (Non-Assembly)
    VALQUA Full face packing for flange (Non-Assembly)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.
    Operating Temperature Range (℃)  -50~100  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Nominal Pressure  10K  Thickness (mm)  Return Ratio (%)  55.0 (at 34.3MPa)  Color  Blue  Type  Full face packing for flange  Tensile Strength (MPa [kgf/cm2])  Horizontal direction 15.3 (153)  Material  Non-asbestos 
    Rating:
    80%
    from S$4.59
    Min. 2 days
  6. Full face packing for flange
    VALQUA Full face packing for flange
    A non-asbestos joint sheet that uses the minimum amount of organic fibers and contains a special rubber binder with excellent heat resistance in addition to artificial inorganic fibers and carbon fibers with excellent heat resistance. It can be applied to a wide range of applications. Petroleum r... Read More
    Tensile Strength (MPa)  (Landscape) 13.1  Flexibility  (Vertical direction) 11  Operating Temperature Range (℃)  -50~214  Thickness (mm)  1.5  Density (kg/m3 1761  Return Ratio (%)  67 (at 34.3MPa)  Compression Ratio (%)  9 (at 34.3MPa)  Type  Full face packing for flange  Feature  Heat-resistant  Material  Non-asbestos 
    Rating:
    97%
    from S$2.79
    Min. 2 days
  7. Full face packing for flange (non-asbestos) (3T 10K)
    Osaka Spirit Full face packing for flange (non-asbestos) (3T 10K)
    A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read More
    Nominal Pressure  10K  Maximum Operating Temperature (℃)  150  Thickness (mm)  Suitable Fluid  General piping such as water and oil 
    Rating:
    93%
    from S$2.09
    Min. 2 days
  8. Full face packing for flange (Non-Assembly)
    VALQUA Full face packing for flange (Non-Assembly)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.
    Operating Temperature Range (℃)  -50~100  Thickness (mm)  1.5  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Nominal Pressure  10K  Tensile Strength (MPa [kgf/cm2])  17.0 [170] horizontal  Return Ratio (%)  57.0 (at 34.3MPa)  Color  Blue  Type  Full face packing for flange  Material  Non-asbestos 
    Rating:
    100%
    from S$2.59
    Min. 2 days
  9. Full face packing for flange (EPDM)
    No Brand Full face packing for flange (EPDM)
    The main raw material is carefully selected ethylene propylene rubber (EPDM), and since it does not have a double bond in the main chain, it has excellent heat resistance, ozone resistance, and weather resistance. In addition, because it has excellent water vapor resistance and low temperature ch... Read More
    Operating Temperature Range (℃)  -40~100  Low Temperature Impact Embrittlement Temperature (℃)  -55  Standard  10K  Thickness (mm)  Elongation (%)  350  Tensile Strength (MPa [kgf/cm2])  7.0[71]  Hardness (Durometer A)  A65S  Color  Black  Material  EPDM  Type  Full face packing for flange  JIS Standard  K6380(BAD6353)  Ozone Degradation Test (50pphm 40℃ 200h 20% elongation)  No crack 
    from S$2.59
    Min. 2 days
  10. Full face packing for flange (EPDM rubber) (5K)
    Osaka Spirit Full face packing for flange (EPDM rubber) (5K)
    A rubber material with weather resistance and high heat resistance. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure... Read More
    Maximum Operating Pressure (MPa)  Maximum Operating Temperature (℃)  120  Thickness (mm)  Nominal Pressure  5K  Material  EPDM (ethylene propylene rubber)  Type  Full face packing for flange 
    Rating:
    80%
    from S$1.29
    Min. 2 days
  11. Full face packing for flange (NA joint sheet)
    NICHIAS Full face packing for flange (NA joint sheet)
    A brown NA (non-asbestos) joint sheet that does not contain any asbestos by adding an inorganic filler to inorganic fibers and aramid fibers and blending oil-resistant synthetic rubber as a binder. Gaskets for flanges, valves, equipment, etc. of various pipes
    Operating Temperature Range (℃)  -100~183  Thickness (mm)  1.5  Density (g/cm3 1.84  Tensile Strength (N/mm2 24.1  Return Ratio (%)  65(34.3N/mm2 Compression Ratio (%)  7(34.3N/mm2 Type  Full face packing for flange  JIS Standard  JIS F 0602 HJ、JIS F 7102 HJH  Material  Non-asbestos 
    Rating:
    90%
    from S$1.79
    Min. 2 days
  12. Eslon packing EPDM 5K specification
    SEKISUI Eslon packing EPDM 5K specification
    Rubber (EPDM) packing with excellent corrosion resistance. Has excellent chlorine water resistance and chemical resistance. Demonstrates high sealing performance with low tightening torque. It is suitable for various types of piping such as chemical piping in chemical factories, pure water piping... Read More
    Specification  JIS5K specification 
    Rating:
    100%
    from S$2.59
    Min. 2 days
  13. Full face packing for flange (non-asbestos) (1.5T 10K)
    Osaka Spirit Full face packing for flange (non-asbestos) (1.5T 10K)
    A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read More
    Thickness (mm)  1.5  Nominal Pressure  10K  Maximum Operating Temperature (℃)  150  Suitable Fluid  General piping such as water and oil 
    Rating:
    20%
    from S$1.19
    Min. 2 days
  14. Middle packing for flange (natural rubber) (5K)
    Osaka Spirit Middle packing for flange (natural rubber) (5K)
    It is the most elastic and general rubber material. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure is applied, it ... Read More
    Maximum Operating Pressure (MPa)  Thickness (mm)  Nominal Pressure  5K  Maximum Operating Temperature (℃)  70  Material  Natural rubber 
    Rating:
    93%
    from S$0.44
    Min. 2 days
  15. Flange packing (outer packing, non-asbestos joint sheet)
    Akitsu Flange packing (outer packing, non-asbestos joint sheet)
    A non-asbestos joint sheet with a practical temperature of 250 ° C (steam 200 ° C). No gasket paste required. Special surface treatment prevents sticking and corrosion. Joint sheet for flange.
    Operating Pressure  10K  Thickness (mm) 
    Rating:
    80%
    from S$6.69
    Min. 2 days
  16. Full face packing for flange (natural rubber) (10K)
    Osaka Spirit Full face packing for flange (natural rubber) (10K)
    It is the most elastic and general rubber material. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure is applied, it ... Read More
    Maximum Operating Pressure (MPa)  Nominal Pressure  10K  Thickness (mm)  Maximum Operating Temperature (℃)  70  Material  Natural rubber 
    Rating:
    60%
    from S$0.82
    Min. 2 days
  17. Full face packing for flange (non-asbestos) (1.5T 5K)
    Osaka Spirit Full face packing for flange (non-asbestos) (1.5T 5K)
    A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read More
    Thickness (mm)  1.5  Maximum Operating Temperature (℃)  150  Nominal Pressure  5K  Type  Full face packing for flange  Suitable Fluid  General piping such as water and oil 
    Rating:
    100%
    from S$0.99
    Min. 2 days
  18. Full face packing for flange (natural rubber) (5K)
    Osaka Spirit Full face packing for flange (natural rubber) (5K)
    It is the most elastic and general rubber material. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure is applied, it ... Read More
    Maximum Operating Pressure (MPa)  Thickness (mm)  Nominal Pressure  5K  Maximum Operating Temperature (℃)  70  Material  Natural rubber 
    from S$0.78
    Min. 2 days
  19. Full Face Packing for Flange (Natural Rubber) 10K
    No Brand Full Face Packing for Flange (Natural Rubber) 10K
    Industrial packing, gasket material, cushioning material, etc.
    Operating Temperature Range (℃)  -50~70  Standard  10K  Compression Set (%)  22 (70 ° C, 22 hours)  Elongation (%)  250  Thickness (mm)  Tensile Strength (MPa)  Hardness (Durometer A)  63  JIS Standard  K6380(AAD6040)  Main Component  Natural rubber, SBR 
    Rating:
    85%
    from S$1.69
    Min. 2 days
  20. Full face packing for flange (non-asbestos) (3T 5K)
    Osaka Spirit Full face packing for flange (non-asbestos) (3T 5K)
    A sheet gasket that contains oil-resistant synthetic rubber in inorganic fibers and aramid fibers. Gaskets for various piping flanges, valves, equipment, etc. * Pressure and heat resistant temperature are inversely proportional to each other depending on the usage conditions. Avoid using it in st... Read More
    Maximum Operating Temperature (℃)  150  Thickness (mm)  Nominal Pressure  5K  Suitable Fluid  General piping such as water and oil 
    from S$1.79
    Min. 2 days
  21. Eslon packing EPDM 10K specification
    SEKISUI Eslon packing EPDM 10K specification
    Wall Thickness (mm)  Material  EPDM  Specification  JIS10K specification  Maximum Allowable Pressure (MPa)  1.0(at20℃) 
    from S$17.99
    Min. 2 days
  22. Full face packing for flange (natural rubber) 5K
    No Brand Full face packing for flange (natural rubber) 5K
    Industrial packing, gasket material, cushioning material, etc.
    Operating Temperature Range (℃)  -50~70  Compression Set (%)  22 (70 ° C, 22 hours)  Elongation (%)  250  Thickness (mm)  Tensile Strength (MPa)  Standard  5K  Hardness (Durometer A)  63  Type  Full face packing for flange  JIS Standard  K6380(AAD6040)  Main Component  Natural rubber, SBR 
    Rating:
    100%
    from S$1.69
    Min. 2 days
  23. Full face packing for flange (Non-Assembly)
    VALQUA Full face packing for flange (Non-Assembly)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.
    Operating Temperature Range (℃)  -50~100  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Thickness (mm)  Return Ratio (%)  55.0 (at 34.3MPa)  Nominal Pressure  5K  Color  Blue  Type  Full face packing for flange  Tensile Strength (MPa [kgf/cm2])  Horizontal direction 15.3 (153)  Material  Non-asbestos 
    Rating:
    100%
    from S$3.29
    Min. 2 days
  24. Full face packing for flange (NA joint sheet)
    NICHIAS Full face packing for flange (NA joint sheet)
    A brown NA (non-asbestos) joint sheet that does not contain any asbestos by adding an inorganic filler to inorganic fibers and aramid fibers and blending oil-resistant synthetic rubber as a binder. Gaskets for flanges, valves, equipment, etc. of various pipes
    Operating Temperature Range (℃)  -100~183  Density (g/cm3 1.84  Tensile Strength (N/mm2 24.1  Thickness (mm)  Return Ratio (%)  65(34.3N/mm2 Compression Ratio (%)  7(34.3N/mm2 Type  Full face packing for flange  JIS Standard  JIS F 0602 HJ、JIS F 7102 HJH  Material  Non-asbestos 
    Rating:
    60%
    from S$2.99
    Min. 2 days
  25. For flange packing JIS10K
    Akitsu For flange packing JIS10K
    from S$0.88
    Min. 2 days
  26. Full face packing for flanges (high function type)
    VALQUA Full face packing for flanges (high function type)
    Black Hyper No. GF300 is a non-asbestos sheet that is mainly composed of graphite and PTFE and has excellent heat resistance and chemical resistance. Since it is composed only of materials with excellent heat resistance and does not contain rubber at all, it is possible to tighten the rubber mate... Read More
    Temperature Range (℃)  -200~300  Type  Full face packing for flange  Feature  Heat resistance, chemical resistance 
    Rating:
    100%
    from S$14.99
    Min. 2 days
  27. Middle packing for flange (natural rubber) (10K)
    Osaka Spirit Middle packing for flange (natural rubber) (10K)
    It is the most elastic and general rubber material. PVC piping, water piping, industrial gaskets * Excessive tightening surface pressure may cause damage and deformation. For the tightening surface pressure, follow the prescribed construction procedure. * If high internal pressure is applied, it ... Read More
    Maximum Operating Pressure (MPa)  Nominal Pressure  10K  Thickness (mm)  Maximum Operating Temperature (℃)  70  Material  Natural rubber 
    Rating:
    100%
    from S$0.50
    Min. 2 days
  28. Full face packing for flange (Non-Assembly)
    VALQUA Full face packing for flange (Non-Assembly)
    Suitable as a non-asbestos gasket for piping flanges and equipment in various industries. Piping flanges for various industries such as petroleum refining / chemicals and ships.
    Operating Temperature Range (℃)  -50~100  Thickness (mm)  1.5  Density (g/cm3 1.81  Compression Ratio (%)  10.0 (at 34.3MPa)  Tensile Strength (MPa [kgf/cm2])  17.0 [170] horizontal  Return Ratio (%)  57.0 (at 34.3MPa)  Nominal Pressure  5K  Color  Blue  Type  Full face packing for flange  Material  Non-asbestos 
    from S$2.29
    Min. 2 days
  29. All for flange packing JIS5K
    Akitsu All for flange packing JIS5K
    Rating:
    100%
    from S$1.79
    Min. 2 days
  30. Joint sheet gasket TOMBO NO.1995 (packing, 10K)
    NICHIAS Joint sheet gasket TOMBO NO.1995 (packing, 10K)
    Material  Inorganic filler, aramid fiber, NBR 
    from S$1.59
    Min. 2 days
  31. Gasket Flange outer packing 10K
    TRUSCO Gasket Flange outer packing 10K
    It is a purely domestic product using a non-asbestos joint sheet made in Japan (No.4612 made by Asktechnica), and is the most versatile type. It is flexible, fits well on the flange surface, and has a good sealing effect. It is not affected by lubricating oil, fuel oil, animal and vegetable oil, ... Read More
    2018 Trusco page  7 0505 
    from S$1.99
    Min. 2 days
  32. Flange packing FF4635
    ASK Flange packing FF4635
    No gasket paste required. A joint sheet that does not contain asbestos. It can be handled in the same way as conventional asbestos products. Heat resistance is improved by using a special heat resistant binder. It can withstand sudden temperature changes and pressure changes. High sealing perform... Read More
    Operating Temperature Range  -40 to 350 ℃ (saturated steam 250 ℃)  Thickness (mm)  Feature  Heat-resistant 
    from S$7.19
    Min. 2 days
  33. Flange packing (outer packing, non-asbestos joint sheet)
    Akitsu Flange packing (outer packing, non-asbestos joint sheet)
    A non-asbestos joint sheet with a practical temperature of 250 ° C (steam 200 ° C). No gasket paste required. Special surface treatment prevents sticking and corrosion. Joint sheet for flange.
    Thickness (mm)  Operating Pressure  5k  Material  Non-asbestos 
    from S$5.89
    Min. 2 days
  34. Cleansing top flange Full surface packing (NA joint sheet)
    NICHIAS Cleansing top flange Full surface packing (NA joint sheet)
    Since it is mainly composed of expanded graphite, it has excellent heat resistance, steam resistance, and corrosion resistance. It is not easily scratched and has excellent flexibility. Used for relatively hot flanges, valves and equipment. For low temperature fluids such as LNG, we recommend TOM... Read More
    Main Component  NBR, aramid fiber, expanded graphite 
    Rating:
    100%
    from S$3.09
    Min. 2 days
  35. D packing (PTFE coating)
    Daiko D packing (PTFE coating)
    Operating Pressure  10K  Thickness (mm)  Material  EPDM rubber, PTEF 
    from S$15.99
    Min. 2 days
  36. Joint sheet gasket TOMBO NO.1120 (Outer packing) 10K type
    NICHIAS Joint sheet gasket TOMBO NO.1120 (Outer packing) 10K type
    Operating Pressure  10K  Material  Expanded graphite, aramid fiber, NBR 
    from S$4.59
    Min. 2 days
  37. Flange packing D6000 (Outer packing, 10K)
    TRUSCO Flange packing D6000 (Outer packing, 10K)
    Operating Pressure  10K 
    from S$1.69
    Min. 2 days
  38. Naflon PTFE punched gasket TOMBO NO.9007 (outer packing) 10K type
    NICHIAS Naflon PTFE punched gasket TOMBO NO.9007 (outer packing) 10K type
    Operating Pressure  10K  Material  Fluorine resin (PTFE) 
    from S$5.39
    Min. 2 days
  39. D packing (EPDM rubber) 10K type
    Daiko D packing (EPDM rubber) 10K type
    Operating Pressure  10K  Thickness (mm)  Material  EPDM rubber 
    from S$2.29
    Min. 2 days
  40. Gasket Flange packing 10K
    TRUSCO Gasket Flange packing 10K
    It is a purely domestic product using a non-asbestos joint sheet made in Japan (No.4612 made by Asktechnica), and is the most versatile type. It is flexible, fits well on the flange surface, and has a good sealing effect. It is not affected by lubricating oil, fuel oil, animal and vegetable oil, ... Read More
    2018 Trusco page  7 0503 
    from S$1.29
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 139

Set Ascending Direction