All Category

Plumbing Tools / Wrenches

View : Grid List
Filter

Items 1 - 40 of 139

Set Ascending Direction
  1. Tightening tool
    TOTO Tightening tool
    Rating:
    100%
    from S$12.99
    Min. 2 days
  2. Sink Drain Plug Spanner
    SANEI Sink Drain Plug Spanner
    A convenient tightening tool when replacing the sink drain plug (with a garbage container). It can be used as a sink drain plug with a drain diameter of 18 cm and 18.5 cm. For installing and removing sink drain plugs.
    Material  Copper 
    Rating:
    91%
    from S$29.99
    Min. 2 days
  3. Drainage wrench
    KAKUDAI MFG Drainage wrench
    A wrench that fits into the two holes of the cleaning port to open and close. It can be used up to a hole spacing of 150 mm.
    Rating:
    69%
    from S$17.99
    Min. 2 days
  4. Faucet removal wrench
    KAKUDAI MFG Faucet removal wrench
    A tool for removing the faucet without difficulty.
    Trusco Part No.  251-8139  Mass (g)  330  Material  Steel 
    Rating:
    96%
    from S$27.99
    Min. 2 days
  5. Cleaning wrench
    SANEI Cleaning wrench
    A wrench for opening and closing the lid of the cleaning port on the floor. Open and close by fitting in two holes. It is also possible to remove the hardened eye plate. Can also be used for unit take-out metal fittings.
    Dimensional tolerance (mm)  15~140  Material  Steel 
    Rating:
    80%
    from S$16.99
    Min. 2 days
  6. Standing Faucet Tightener
    KAKUDAI MFG Standing Faucet Tightener
    A tool for tightening and removing lock nuts for standing faucets and mixing faucets for two-hole washbasins.
    Width Across Flats (mm)  (Handle hexagon wrench) 12  Material  Cast iron  Suitable for  For 23 / 25mm across flats 
    Rating:
    98%
    from S$29.99
    Min. 2 days
  7. Faucet wrench with stand
    KVK Faucet wrench with stand
    Rating:
    87%
    from S$35.99
    Min. 2 days
  8. Trap tightening tool for washing machine bread
    MIYAKO Trap tightening tool for washing machine bread
    It can be used for tightening traps in washing machine pans and unit baths. * Some traps may not fit, so please check before using.
    Dimension (mm)  142×110 
    Rating:
    80%
    from S$29.99
    Min. 2 days
  9. Nut tightening tool
    SANEI Nut tightening tool
    It is used when turning the lock nuts of standing faucets and mixing faucets (opposite sides of about 23 mm and 24 mm).
    Material  Steel 
    Rating:
    98%
    from S$29.99
    Min. 2 days
  10. Faucet wrench with stand
    KVK Faucet wrench with stand
    Rating:
    90%
    from S$43.99
    Min. 2 days
  11. Tightening tool
    TOTO Tightening tool
    Rating:
    84%
    from S$13.99
    Min. 2 days
  12. Benley wrench
    SANEI Benley wrench
    The head can be bent when turning nuts in narrow spaces. With ratchet mechanism. In places where monkey wrenches cannot be used
    Material  Steel 
    Rating:
    90%
    from S$32.99
    Min. 2 days
  13. Nut tightening tool
    SANEI Nut tightening tool
    Used when turning the lock nut of the one-hole mixing tap (opposite side about 38 mm).
    Included Accessories  Hexagon spanner  Material  Steel 
    Rating:
    60%
    from S$29.99
    Min. 2 days
  14. Nut tightening tool
    TOTO Nut tightening tool
    A tool for tightening lock nuts and connecting bag nuts for standing faucets and hot and cold water mixing faucets (center set).
    Rating:
    91%
    from S$37.99
    Min. 2 days
  15. Nut tightening tool
    SANEI Nut tightening tool
    It is used when turning the lock nut of the one-hole mixing tap (opposite sides about 36 mm and 46 mm).
    Material  Steel 
    Rating:
    80%
    from S$47.99
    Min. 2 days
  16. Clamping tool
    KAKUDAI MFG Clamping tool
    For sink traps (4526, 452-600, 452-601, 452-602)
    Material  ABS 
    Rating:
    100%
    from S$27.99
    Min. 2 days
  17. Trap tightening tool
    KAKUDAI MFG Trap tightening tool
    For 426-121, 426-131, 426-144, 426-154
    Material  Steel 
    Rating:
    100%
    from S$27.99
    Min. 2 days
  18. Both ends multi-benley wrench
    SANEI Both ends multi-benley wrench
    The head can be bent when turning nuts in narrow places. With ratchet mechanism.
    Nut opposite side (mm)  Small: 23-24 / Large: 30-48  Material  Steel 
    Rating:
    60%
    from S$119.90
    Min. 2 days
  19. Tool (unit)
    TOTO Tool (unit)
    A tightening tool for attaching and detaching bottom construction type warmlets and toilet seats.
    Rating:
    76%
    from S$5.39
    Min. 2 days
  20. Faucet spanner
    SANEI Faucet spanner
    Material  Steel 
    Rating:
    80%
    from S$9.79
    Min. 2 days
  21. Washing machine bread trap tightening tool for washing machine bread
    TOTO Washing machine bread trap tightening tool for washing machine bread
    Rating:
    95%
    from S$15.99
    Min. 2 days
  22. Spanner (For Nut Tightening)
    TOTO Spanner (For Nut Tightening)
    Rating:
    75%
    from S$69.99
    Min. 2 days
  23. Spanner (for nut tightening)
    TOTO Spanner (for nut tightening)
    Rating:
    80%
    from S$37.99
    Min. 2 days
  24. Nut tightening tool
    SANEI Nut tightening tool
    Dedicated to bolt-type one-hole mixing tap For hexagonal opposite side 13 mm
    Material  Steel 
    from S$7.49
    Min. 2 days
  25. Water faucet mounting wrench
    SANEI Water faucet mounting wrench
    Used when turning the lock nut of a standing faucet or a mixing faucet (opposite side about 24 mm). The hexagon wrench can be used as a handle and can also be used to attach a polygonal hole colander.
    Material  Steel 
    from S$29.99
    Min. 2 days
  26. Water faucet repair wrench set (popular type)
    KAKUDAI MFG Water faucet repair wrench set (popular type)
    Although it is a simplified version, it fits the top nuts, pipe nuts, crank nuts, etc. of household faucets.
    Suitable for  For opposite sides 24, 26, 28, 30, 32 mm  Material  Steel 
    Rating:
    88%
    from S$7.99
    Min. 2 days
  27. Circulation Bracket Tightening Tool For Outer Bobbin Hooks For Bathtub
    TOTO Circulation Bracket Tightening Tool For Outer Bobbin Hooks For Bathtub
    A tightening tool for attaching the circulation bracket for the outer hook to the bathtub.
    Suitable for  TB14GW45、TB14SW45 
    Rating:
    95%
    from S$35.99
    Min. 2 days
  28. Inner wrench
    KAKUDAI MFG Inner wrench
    It is used to remove the unbroken piping screw. Call 13/20
    from S$149.90
    Min. 2 days
  29. Nut tightening tool
    SANEI Nut tightening tool
    Used when turning the lock nut of the one-hole mixing tap (opposite side approx. 46 mm). The hexagon wrench can be used as a handle and can also be used to attach a polygonal hole colander.
    Width Across Flats (mm)  (Hexagon spanner) 13  Material  Steel 
    Rating:
    60%
    from S$35.99
    Min. 2 days
  30. Clamping tool
    KAKUDAI MFG Clamping tool
    For 4530
    Material  Steel 
    Rating:
    100%
    from S$29.99
    Min. 2 days
  31. B Large-sized fastening bracket (resin)
    SUGICO B Large-sized fastening bracket (resin)
    Suitable for  TO-194BK、TO-195BK、TO-943、TO-944、TO-945 
    Rating:
    70%
    from S$32.99
    Min. 2 days
  32. Gaona faucet tightening tool for one-hole mixing faucet (narrow deep)
    GAONA Gaona faucet tightening tool for one-hole mixing faucet (narrow deep)
    For one-hole (one-hole) mixing tap. Since it can be tightened in a space-saving manner, the mixing tap can be installed and removed even under a sink where a monkey wrench cannot be used. Since the length from the handle to the tightening part is long, tightening is easy even in a deep and narrow... Read More
    Width Across Flats (mm)  38・47  Material  Steel 
    Rating:
    100%
    from S$48.99
    Min. 2 days
  33. Faucet spanner set
    SANEI Faucet spanner set
    Nut opposite side (mm)  24、26、28、30、32  Material  Steel  Included Accessories  Yatco, 2 Escoma 
    from S$12.99
    Min. 2 days
  34. Gaona drain port wrench for lid opening / closing (span cleaning port unit removal metal fittings maximum width 150 mm)
    GAONA Gaona drain port wrench for lid opening / closing (span cleaning port unit removal metal fittings maximum width 150 mm)
    It corresponds to the hole spacing of 13 to 150 mm such as the cleaning port. Insert pins into the two holes on the lid to open and close. It can be used for cleaning ports, eye plates, unit take-out metal fittings, etc. A wrench that can open and close the lid of the drain.
    Material  Steel 
    Rating:
    60%
    from S$15.99
    Min. 2 days
  35. A Large clamp (metal)
    SUGICO A Large clamp (metal)
    Suitable for  TO-194、195、TO-281、TO-282 
    from S$77.99
    Min. 2 days
  36. Red tag found faucet removal wrench set for single faucet with seal tape (easy replacement of old faucet)
    GAONA Red tag found faucet removal wrench set for single faucet with seal tape (easy replacement of old faucet)
    Ideal for single faucets that are hard and cannot be removed. It can be attached and detached simply by hooking it on a single faucet and turning it. Since the hooked part is a resin film, the faucet is not easily scratched. Comes with 5m of sealing tape (tape width 13mm), which is essential for ... Read More
    from S$19.99
    Min. 2 days
  37. Faucet wrench
    SANEI Faucet wrench
    A convenient wrench for attaching and detaching faucets.
    Material  Steel 
    Rating:
    100%
    from S$22.99
    Min. 2 days
  38. Red tag found faucet removal wrench for single faucet (old faucet hard replacement easy)
    GAONA Red tag found faucet removal wrench for single faucet (old faucet hard replacement easy)
    Ideal for single faucets that are hard and cannot be removed. It can be easily attached and detached by simply hooking it on a single faucet and turning it. Since the hooked part is a resin film, the faucet is not easily scratched. A tool that allows you to easily install and remove a single fauc... Read More
    Material  Steel, polypropylene 
    from S$17.99
    Min. 2 days
  39. Extension socket tightening tool
    KVK Extension socket tightening tool
    Suitable Model  (P) For Z1020 and other sockets 
    Rating:
    100%
    from S$10.99
    Min. 2 days
  40. Tightening tool (for cleaning drainage fittings)
    TOTO Tightening tool (for cleaning drainage fittings)
    Rating:
    60%
    from S$48.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 139

Set Ascending Direction