Hydraulic Hoses
A hydraulic hose is a hose used for hydraulic piping. Many hose shapes are constructed with a cover on the outside of the inner tube to enhance durability. Many of the inner pipes use oil-resistant synthetic rubber to withstand hydraulic pressure, and the outer jacket uses synthetic rubber that resists deformation and deterioration called wear resistance and weather resistance. There are differences in the outer diameter and length, etc., and it is necessary to install a suitable size depending on the hydraulic machine used.
Other Related Pages
BRIDGESTONE Pass color PA1408 (with bracket F + C + 2 adapters)Hose Inner Diameter (Φmm) 12.7 Minimum Burst Pressure (MPa) 56 Reinforcing Layer 1W Fluid Temperature Range (℃) -40～+100 Dimension X (mm) 27 Recommended ambient temperature (℃) -40～+70 Maximum Operating Pressure (MPa) 14 Mass (g/m) 400 Dimension Y (mm) 22 Minimum Bending Radius (mm) 90 Approximate mass (g) Fitting / 140, Adapter / 100 Suitable Fluid Mineral hydraulic oil Dimension E (mm) (8001RG08)33、(8002RG08)35 Thread Size G1/2 Fitting length (L) (mm) 67 Hose Outer Diameter (Φmm) 19.5from S$99.90Min. 6 days- THE YOKOHAMA RUBBER (YOKOHAMA) MID Oil HoseA substitute oil resistant hose for Yokohama Rubber. The inner rubber has excellent oil resistance, and the outer rubber has excellent oil resistance, weather resistance, and durability. Oil feeding of general hydraulic oil, lubricating oil, heavy oil, etc.
- BRIDGESTONE Pass color PA2106 (Both-end bracket F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingApproximate mass (g) Clasp / 100 Reinforcing Layer 2W Recommended ambient temperature (℃) -40～+70 Hose Outer Diameter (Φmm) 18.0 Thread Size G3/8 Suitable Fluid Mineral hydraulic oil Mass (g/m) Hose / 470 Hardware Both ends bracket F Fluid Temperature Range (℃) -40～+100 Dimension Y (mm) 19 Inner Diameter (inch) 3/8 Fitting length (L) (mm) 62 Minimum Burst Pressure (MPa) 82.0 Dimension X (mm) 22 Minimum Bending Radius (mm) 90 Hose Inner Diameter (Φmm) 9.5 Maximum Operating Pressure (MPa) 20.5
- BRIDGESTONE Pass color PA0704 (Both ends F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingDimension X (mm) 19 Reinforcing Layer 1W Recommended ambient temperature (℃) -40～+70 Minimum Burst Pressure (MPa) 28.0 Hardware Both ends bracket F Fluid Temperature Range (℃) -40～+100 Inner Diameter (inch) 1/4 Dimension Y (mm) 17 Minimum Bending Radius (mm) 55 Fitting length (L) (mm) 56 Maximum Operating Pressure (MPa) 7.0 Thread Size G1/4 Hose Inner Diameter (Φmm) 6.3 Mass (g/m) Hose / 220 Suitable Fluid Mineral hydraulic oil Hose Outer Diameter (Φmm) 13.2
- DENKA ELECTRON Protective tube for hydraulic hoseA cover tube that is ideal for protecting hydraulic hoses. A highly flexible sleeve braided with nylon thread. It can be used as a protective cover for hydraulic rubber hoses and hydraulic hoses for industrial machines. This sleeve has a fine mesh and no gaps, so it can completely prevent the hyd... Read MoreOperating Temperature Range (℃) -60～160 Wall thickness T (mm) 1.1 Melting Point (℃) 256 Standard Color Black Material Nylon multifilament Specification RoHS compliant, UV weather resistant Flame Retardance VW-1 equivalent Tolerance ±5mm
- BRIDGESTONE Pass color PA2104 (Both ends F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingHose Inner Diameter (Φmm) 6.3 Hose Outer Diameter (Φmm) 13.8 Reinforcing Layer 1W Dimension X (mm) 19 Fitting length (L) (mm) 56 Dimension Y (mm) 17 Mass (g/m) Hose / 250 Hardware Both ends bracket F Fluid Temperature Range (℃) -40～+100 Approximate mass (g) Clasp / 65 Inner Diameter (inch) 1/4 Minimum Burst Pressure (MPa) 82.0 Thread Size G1/4 Minimum Bending Radius (mm) 70 Recommended ambient temperature (℃) -40～+70 Maximum Operating Pressure (MPa) 20.5 Suitable Fluid Mineral hydraulic oil
- BRIDGESTONE Cell Fit Fitting F (Union Nut Female Sheet) TypeSELFIT is a product that enables joining of high-pressure resin hoses and mouthpieces with one push. Piping work can be done easily because no crimping machine is required.
-
- BRIDGESTONE PASCALART PA2106 (Both-End Coupling C)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingHose Outer Diameter (Φmm) 18.0 Reinforcing Layer 2W Hose Inner Diameter (Φmm) 9.5 Mass (g/m) Hose / 470 Fluid Temperature Range (℃) -40～+100 Dimension X (mm) 22 Dimension Y (mm) 19 Recommended ambient temperature (℃) -40～+70 Fitting length (L) (mm) 62 Hardware Both ends bracket C Minimum Burst Pressure (MPa) 82.0 Suitable Fluid Mineral hydraulic oil Inner Diameter (inch) 3/8 Maximum Operating Pressure (MPa) 20.5 Minimum Bending Radius (mm) 90 Thread Size G3/8
- SHOWA Flexible Hose FHCSliding surface and rotating hose for piping Excellent heat resistance and durabilityOperating Temperature Range (℃) -20～+60 Dimension D1 (Φmm) 10 Dimension D2 (Φmm) 10.5 Maximum Operating Pressure (MPa) 2.5 Hose Inner Diameter (Φmm) 3.7 Hose Outer Diameter (Φmm) 8 Minimum Bending Radius (mm) 80 Color Black Housing Structure Protection spring (with plating) Blade Vinylon fiber
- MonotaRO Protection tube for hydraulic hoseA tube made by spinning fine threads woven from nylon fibers. It has excellent durability, wear resistance, and tensile strength, and because the mesh is fine and there are no gaps, it is possible to prevent the hydraulic oil from bursting. The hook-and-loop fastener structure makes it easy to in... Read MoreOperating Temperature Range (℃) -40～125 Melting Point (℃) 220±10 Standard UL94V-2 equivalent
- DENKA ELECTRON Protective Tube for Hydraulic HoseThis tube is ideal for protecting hydraulic hoses. The strong hook-and-loop fastener can be opened and closed for easy on-site installation. A highly flexible sleeve braided with nylon thread. It is also possible to install from the top of the spring or bundle several hoses. Since the stitches ar... Read MoreOperating Temperature Range (℃) -60～125 Melting Point (℃) 220±10 Standard Color Black Flame Retardance Equivalent to VW-1 + Width (mm) Hook-and-loop fastener: 20 Material Nylon multifilament
- BRIDGESTONE Pass color PA2108 (Both ends F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingFluid Temperature Range (℃) -40～+100 Recommended ambient temperature (℃) -40～+70 Inner Diameter (inch) 1/2 Minimum Bending Radius (mm) 110 Hose Inner Diameter (Φmm) 12.7 Maximum Operating Pressure (MPa) 20.5 Dimension Y (mm) 22 Hose Outer Diameter (Φmm) 22.2 Dimension X (mm) 27 Reinforcing Layer 2W Fitting length (L) (mm) 67 Minimum Burst Pressure (MPa) 82.0 Hardware Both ends bracket F Thread Size G1/2 Mass (g/m) Hose / 650 Suitable Fluid Mineral hydraulic oil
- BRIDGESTONE Pass color PA1406 (Both ends F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingMinimum Burst Pressure (MPa) 56.0 Recommended ambient temperature (℃) -40～+70 Hose Outer Diameter (Φmm) 16.6 Mass (g/m) Hose / 350 Fluid Temperature Range (℃) -40～+100 Approximate mass (g) Clasp / 100 Reinforcing Layer 1W Thread Size G3/8 Inner Diameter (inch) 3/8 Dimension Y (mm) 19 Dimension X (mm) 22 Maximum Operating Pressure (MPa) 14.0 Hardware Both ends bracket F Minimum Bending Radius (mm) 75 Fitting length (L) (mm) 62 Hose Inner Diameter (Φmm) 9.5 Suitable Fluid Mineral hydraulic oil
- BRIDGESTONE SELFIT Hose SPL SeriesRevolutionary one-push high-pressure hose that eliminates the need for a crimping machine, mouthpiece system Cellfit.Suitable Fluid Mineral general hydraulic oil Fluid Temperature Range (℃) -30～80 Recommended ambient temperature (℃) -30～70from S$12.99Min. 2 days
- BRIDGESTONE Pass color PA2104 (Both-end bracket C)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingFitting length (L) (mm) 56 Thread Size G1/4 Recommended ambient temperature (℃) -40～+70 Dimension Y (mm) 17 Hose Inner Diameter (Φmm) 6.3 Mass (g/m) Hose / 250 Minimum Bending Radius (mm) 70 Reinforcing Layer 1W Fluid Temperature Range (℃) -40～+100 Hardware Both ends bracket C Hose Outer Diameter (Φmm) 13.8 Minimum Burst Pressure (MPa) 82.0 Inner Diameter (inch) 1/4 Suitable Fluid Mineral hydraulic oil Maximum Operating Pressure (MPa) 20.5 Dimension X (mm) 19
- BRIDGESTONE Pass color PA2106 (with F + adapter on both ends)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipi... Read MoreRecommended ambient temperature (℃) -40～+70 Mass (g/m) Hose / 470 Reinforcing Layer 2W Hose Outer Diameter (Φmm) 18.0 Fluid Temperature Range (℃) -40～+100 Dimension X (mm) 22 Minimum Bending Radius (mm) 90 Hardware With both ends F + adapter Approximate mass (g) Fitting / 100, Adapter / 60 Thread Size G3/8 Inner Diameter (inch) 3/8 Hose Inner Diameter (Φmm) 9.5 Dimension Y (mm) 19 Suitable Fluid Mineral hydraulic oil Fitting length (L) (mm) 62 Dimension E (mm) 29 Minimum Burst Pressure (MPa) 82.0 Maximum Operating Pressure (MPa) 20.5
- TOGAWA RUBBER Hydraulic hose K-140-09 (Both ends metal 05)For general hydraulic piping * If the hose is straight, the length to the tip of the metal fittings (coupling) at both ends is l. Length I when assembling the adapter is not included.Fluid Temperature Range (℃) -40～+100 Working Ambient Temperature (℃) -40～+70 Minimum Bending Radius (mm) 115 Maximum Operating Pressure (MPa) 14.0 Hose Outer Diameter (Φmm) 17.5 Reinforcing Layer 1W Maximum Impact Pressure (MPa) 20.5 Dimensions HEX (mm) 22 Dimension L (mm) 65 Minimum Burst Pressure (MPa) 68.6 Screw port inner diameter (Φmm) 7.0 Part No. 9 Hose Inner Diameter (Φmm) 9.5 RoHS directive (corresponding to 10 substances) Correspondence Hardware End bracket 05 Stud Thread G3/8 Mass (g/m) Hose / 400 Type K type (for high pressure)
- NITTA Linemate Hose 1000-04Small outer diameter, lightweight, camper joints can be usedPart No. 04 Inner Diameter (inch) 1/4 Outer Diameter (mm) 10.4 Maximum Operating Pressure (MPa) 10.5 Minimum Bending Radius (mm) 30 Inner Diameter (mm) 6.3 RoHS directive (corresponding to 10 substances) Correspondence Suitable for Fitting type / campaca, swage Suitable Fluid Mineral general hydraulic oil
- BRIDGESTONE Pass color PA0706 (Both-end bracket F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingHose Inner Diameter (Φmm) 9.5 Recommended ambient temperature (℃) -40～+70 Mass (g/m) Hose / 330 Dimension Y (mm) 19 Reinforcing Layer 1W Approximate mass (g) Clasp / 100 Hardware Both ends bracket F Maximum Operating Pressure (MPa) 7.0 Fluid Temperature Range (℃) -40～+100 Minimum Burst Pressure (MPa) 28.0 Dimension X (mm) 22 Thread Size G3/8 Fitting length (L) (mm) 62 Hose Outer Diameter (Φmm) 16.2 Suitable Fluid Mineral hydraulic oil Inner Diameter (inch) 3/8 Minimum Bending Radius (mm) 75from S$37.99Min. 2 days
- OHTSUKA YELLOCThis product is designed to minimize the leakage of oil and chemical substances. Keeps the work environment clean and safe for various flood control lines and chemical piping. It is easy to install and can minimize leaks. It can be used many times with proper cleaning. No tools are required for i... Read More
- BRIDGESTONE Pass color PA1404 (Both ends F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingFluid Temperature Range (℃) -40～+100 Thread Size G1/4 Minimum Burst Pressure (MPa) 56.0 Reinforcing Layer 1W Hose Inner Diameter (Φmm) 6.3 Fitting length (L) (mm) 56 Dimension Y (mm) 17 Approximate mass (g) Clasp / 65 Recommended ambient temperature (℃) -40～+70 Hose Outer Diameter (Φmm) 13.6 Maximum Operating Pressure (MPa) 14.0 Suitable Fluid Mineral hydraulic oil Hardware Both ends bracket F Inner Diameter (inch) 1/4 Dimension X (mm) 19 Mass (g/m) Hose / 240 Minimum Bending Radius (mm) 55
- NITTA Linemate Hose 3130-02Has excellent oil resistance and chemical resistance. Reusable fittings can be used.Part No. 02 Inner Diameter (inch) 1/8 Minimum Bending Radius (mm) 15 Maximum Operating Pressure (MPa) 20.0 Inner Diameter (mm) 3.6 Outer Diameter (mm) 8.3 RoHS directive (corresponding to 10 substances) Correspondence Suitable for Fitting type / campaca, reusable, swage Suitable Fluid Mineral general hydraulic oil
- BRIDGESTONE Pass color PA2104 (with metal fittings F + adapter on both ends)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipi... Read MoreHardware With both ends F + adapter Inner Diameter (inch) 1/4 Fitting length (L) (mm) 56 Mass (g/m) Hose / 250 Minimum Bending Radius (mm) 70 Dimension Y (mm) 17 Recommended ambient temperature (℃) -40～+70 Dimension X (mm) 19 Approximate mass (g) Fitting / 65, Adapter / 40 Hose Inner Diameter (Φmm) 6.3 Hose Outer Diameter (Φmm) 13.8 Thread Size G1/4 Reinforcing Layer 1W Fluid Temperature Range (℃) -40～+100 Dimension E (mm) 26 Suitable Fluid Mineral hydraulic oil Minimum Burst Pressure (MPa) 82.0 Maximum Operating Pressure (MPa) 20.5
- NITTA Linemate Hose 1000-06Small outer diameter, lightweight, camper joints can be usedPart No. 06 Maximum Operating Pressure (MPa) 10.5 Outer Diameter (mm) 14.0 Inner Diameter (inch) 3/8 Minimum Bending Radius (mm) 60 Inner Diameter (mm) 9.5 RoHS directive (corresponding to 10 substances) Correspondence Suitable for Fitting type / campaca, swage Suitable Fluid Mineral general hydraulic oil
- NITTA Linemate hose 3130-04Has excellent oil resistance and chemical resistance. Reusable fittings can be used.Operating Temperature Range (℃) -40～100 Part No. 04 Inner Diameter (inch) 1/4 Outer Diameter (mm) 12.4 Maximum Operating Pressure (MPa) 20.0 Minimum Bending Radius (mm) 40 Inner Diameter (mm) 6.3 RoHS directive (corresponding to 10 substances) Correspondence Suitable for Fitting type / reusable, swage Suitable Fluid Mineral general hydraulic oil
- TOGAWA RUBBER Hydraulic hose K-70-09 (Both ends 04 + With adapter)For general hydraulic piping * If the hose is straight, the length to the tip of the metal fittings (coupling) at both ends is l. Length I when assembling the adapter is not included.Fluid Temperature Range (℃) -40～+100 Working Ambient Temperature (℃) -40～+70 Maximum Impact Pressure (MPa) 10.3 Minimum Bending Radius (mm) 110 Hose Outer Diameter (Φmm) 17.5 Reinforcing Layer 1W Dimensions HEX (mm) 22 Minimum Burst Pressure (MPa) 34.5 Dimension C (mm) 6.5 Dimension L (mm) 65 Screw port inner diameter (Φmm) 7.0 Maximum Operating Pressure (MPa) 7.0 Part No. 9 Hose Inner Diameter (Φmm) 9.5 RoHS directive (corresponding to 10 substances) Correspondence Stud Thread G3/8 Mass (g/m) Hose / 400 Type K type (for high pressure)
- BRIDGESTONE Pass color PA2106 (with metal fittings C + adapter on both ends)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipi... Read MoreRecommended ambient temperature (℃) -40～+70 Hose Outer Diameter (Φmm) 18.0 Dimension Y (mm) 19 Hardware With both ends C + adapter Hose Inner Diameter (Φmm) 9.5 Dimension X (mm) 22 Dimension E (mm) 29 Reinforcing Layer 2W Thread Size G3/8 Minimum Bending Radius (mm) 90 Mass (g/m) Hose / 470 Minimum Burst Pressure (MPa) 82.0 Suitable Fluid Mineral hydraulic oil Fluid Temperature Range (℃) -40～+100 Maximum Operating Pressure (MPa) 20.5 Fitting length (L) (mm) 62 Inner Diameter (inch) 3/8
- BRIDGESTONE Pass color PA2112 (Both ends F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingFitting length (L) (mm) 83 Fluid Temperature Range (℃) -40～+100 Reinforcing Layer 2W Hose Outer Diameter (Φmm) 29.7 Mass (g/m) Hose / 960 Dimension X (mm) 36 Minimum Bending Radius (mm) 170 Recommended ambient temperature (℃) -40～+70 Hardware Both ends bracket F Maximum Operating Pressure (MPa) 20.5 Dimension Y (mm) 30 Hose Inner Diameter (Φmm) 19.0 Suitable Fluid Mineral hydraulic oil Inner Diameter (inch) 3/4 Thread Size G3/4 Minimum Burst Pressure (MPa) 82.0from S$129.90Min. 2 days
- THE YOKOHAMA RUBBER (YOKOHAMA) WS18Z Socketless HoseMaximum Operating Pressure (MPa) 1.8 Minimum Burst Pressure (MPa) 7from S$38.99Min. 2 days
- BRIDGESTONE Pass color PA1408 (Both ends F)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingFluid Temperature Range (℃) -40～+100 Recommended ambient temperature (℃) -40～+70 Hose Inner Diameter (Φmm) 12.7 Minimum Burst Pressure (MPa) 56.0 Reinforcing Layer 1W Dimension Y (mm) 22 Dimension X (mm) 27 Hardware Both ends bracket F Hose Outer Diameter (Φmm) 19.5 Mass (g/m) Hose / 400 Minimum Bending Radius (mm) 90 Thread Size G1/2 Maximum Operating Pressure (MPa) 14.0 Fitting length (L) (mm) 67 Inner Diameter (inch) 1/2 Suitable Fluid Mineral hydraulic oilfrom S$66.99Min. 2 days
- THE YOKOHAMA RUBBER (YOKOHAMA) Levex SWP140 9 (Both ends metal fitting 1004)Operating Temperature Range (℃) -40～+100 Maximum Operating Pressure (MPa) 14 Outer Diameter (mm) 16 Reinforcing Layer 1W/B Minimum Burst Pressure (MPa) 56 Inner Diameter (mm) 9.5 Hardware Both ends bracket 1004 Thread Size G(PF)3/8 Suitable Fluid General hydraulic oil
- TOGAWA RUBBER Hydraulic hose K-210-09 (with metal fittings on both ends 05 + adapter)For general hydraulic piping * If the hose is straight, the length to the tip of the metal fittings (coupling) at both ends is l. Length I when assembling the adapter is not included.Fluid Temperature Range (℃) -40～+100 Working Ambient Temperature (℃) -40～+70 Minimum Burst Pressure (MPa) 103 Minimum Bending Radius (mm) 130 Hose Outer Diameter (Φmm) 19.1 Maximum Operating Pressure (MPa) 21.0 Dimensions HEX (mm) 22 Reinforcing Layer 2W Maximum Impact Pressure (MPa) 30.9 Dimension L (mm) 65 Screw port inner diameter (Φmm) 7.0 Part No. 9 Hose Inner Diameter (Φmm) 9.5 RoHS directive (corresponding to 10 substances) Correspondence Stud Thread G3/8 Mass (g/m) Hose / 615 Type K type (for high pressure) Hardware With both ends bracket 05 + adapter
- BRIDGESTONE Pass color PA2108 (Both-end bracket C)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipingReinforcing Layer 2W Fluid Temperature Range (℃) -40～+100 Dimension X (mm) 27 Recommended ambient temperature (℃) -40～+70 Mass (g/m) Hose / 650 Hose Outer Diameter (Φmm) 22.2 Suitable Fluid Mineral hydraulic oil Dimension Y (mm) 22 Inner Diameter (inch) 1/2 Hose Inner Diameter (Φmm) 12.7 Thread Size G1/2 Maximum Operating Pressure (MPa) 20.5 Hardware Both ends bracket C Fitting length (L) (mm) 67 Minimum Bending Radius (mm) 110 Minimum Burst Pressure (MPa) 82.0
- TOGAWA RUBBER Hydraulic hose K-210-06 (Both ends metal 04)For general hydraulic pipingFluid Temperature Range (℃) -40～+100 Working Ambient Temperature (℃) -40～+70 Minimum Bending Radius (mm) 100 Minimum Burst Pressure (MPa) 103 Hose Outer Diameter (Φmm) 13.3 Dimensions HEX (mm) 19 Reinforcing Layer 1W Maximum Operating Pressure (MPa) 21.0 Maximum Impact Pressure (MPa) 30.9 Screw port inner diameter (Φmm) 4.0 Part No. 6 Hose Inner Diameter (Φmm) 6.3 Dimension L (mm) 60 Hardware Both ends bracket 04 RoHS directive (corresponding to 10 substances) Correspondence Stud Thread G1/4 Mass (g/m) Hose / 260 Type K type (for high pressure)
- TOGAWA RUBBER Hydraulic hose K-210-09 (Both ends 04)For general hydraulic pipingFluid Temperature Range (℃) -40～+100 Working Ambient Temperature (℃) -40～+70 Minimum Burst Pressure (MPa) 103 Minimum Bending Radius (mm) 130 Hose Outer Diameter (Φmm) 19.1 Maximum Operating Pressure (MPa) 21.0 Dimensions HEX (mm) 22 Reinforcing Layer 2W Maximum Impact Pressure (MPa) 30.9 Dimension C (mm) 6.5 Dimension L (mm) 65 Screw port inner diameter (Φmm) 7.0 Part No. 9 Hose Inner Diameter (Φmm) 9.5 Hardware Both ends bracket 04 RoHS directive (corresponding to 10 substances) Correspondence Stud Thread G3/8 Mass (g/m) Hose / 615 Type K type (for high pressure)
- THE YOKOHAMA RUBBER (YOKOHAMA) L35 (medium pressure 3.5Mpa) hoseA reliable synthetic fiber reinforced layer hose that is lightweight and has excellent flexibility. ISO4079-R6, SAE100R6 standard passed product. Oil feeding of general hydraulic oil, lubricating oil, heavy oil, etc. * If it is difficult to insert bamboo shoots, etc., soak the tip in hot water be... Read MoreOperating Temperature Range (℃) -40～+100 Minimum Burst Pressure (MPa) 14 Maximum Operating Pressure (MPa) 3.5 Suitable Fluid General hydraulic oilfrom S$29.99Min. 5 days
-
- BRIDGESTONE Pass color PA2108 (with bracket F + adapter on both ends)Long life, high fatigue resistance A small bending radius enables compact hydraulic piping A wide range of product systems that match the rated pressure of the pump JIS K6349-3 (High pressure rubber hose) JIS B 8360 (High pressure rubber hose assembly) compliant product For general hydraulic pipi... Read MoreFluid Temperature Range (℃) -40～+100 Hose Inner Diameter (Φmm) 12.7 Dimension Y (mm) 22 Reinforcing Layer 2W Recommended ambient temperature (℃) -40～+70 Dimension X (mm) 27 Hardware With both ends F + adapter Mass (g/m) Hose / 650 Hose Outer Diameter (Φmm) 22.2 Dimension E (mm) 33 Maximum Operating Pressure (MPa) 20.5 Thread Size G1/2 Minimum Bending Radius (mm) 110 Inner Diameter (inch) 1/2 Minimum Burst Pressure (MPa) 82.0 Suitable Fluid Mineral hydraulic oil Fitting length (L) (mm) 67
- TOGAWA RUBBER Hydraulic hose K-210-12 (Both ends metal 05)For general hydraulic piping * If the hose is straight, the length to the tip of the metal fittings (coupling) at both ends is l. Length I when assembling the adapter is not included.Fluid Temperature Range (℃) -40～+100 Working Ambient Temperature (℃) -40～+70 Screw port inner diameter (Φmm) 10.0 Minimum Burst Pressure (MPa) 103 Part No. 12 Hose Inner Diameter (Φmm) 12.7 Minimum Bending Radius (mm) 160 Maximum Operating Pressure (MPa) 21.0 Hose Outer Diameter (Φmm) 22.2 Dimensions HEX (mm) 27 Reinforcing Layer 2W Maximum Impact Pressure (MPa) 30.9 Dimension L (mm) 70 RoHS directive (corresponding to 10 substances) Correspondence Hardware End bracket 05 Stud Thread G1/2 Mass (g/m) Hose / 760 Type K type (for high pressure)
