Cycle Houses / Cycle Stands
Cycle houses and cycle stands are "cycle houses" that protect bicycles from the elements such as wind, rain and ultraviolet rays and prevent deterioration, and tools for parking, repairing, and displaying bicycles by fixing and stabilizing bicycles. For bicycle parking applications, it secures the front wheel for stability and at the same time saves space. There is a type that removes and fixes the tire when repairing, and a work stand that doubles as an interior stand. There are also hook-type stands, special hooks for hanging from the ceiling, and storage stands that you see at race venues.
Other Related Pages
MonotaRO Stand Bicycle Rear Wheel Hub Fixing TypeIt is a type that holds and fixes a quick lever that is convenient for maintenance and storage. Supports end widths from 130 mm to 135 mm. Since it has a simple structure made by bending an iron pipe, you can widen it, narrow it, or widen it, and use it with just the right width. (If narrowed, it... Read MoreSuitable Size 20-29 inch Material Body: Steel hook part: Plastic- MonotaRO Bicycle Stand Rear Hook TypeA display stand supported by a seat stay and a chain stay. It can be used for various bicycles by changing the location of the two hooks. Since the rear wheel is lifted, it is very convenient for light maintenance such as adjusting the derailleur and cleaning the chain. * Never ride a bicycle wit... Read MoreDimensions (H x W x D) (mm) 610×360×310
- IRIS OHYAMA Bicycle Rack StandA bicycle stand with a stepped structure that allows you to place your bicycle in a small space. Secure the bicycle with the tire fixing plate. The position of the stand can be adjusted in 3 steps. It can be adjusted to an appropriate width according to the size of the bicycle. We have double coa... Read MoreApplicable tire size 20 inches or more Length (mm) 430 Applicable Tire Width (mm) 55 or less Color Black
- MonotaRO Display Hanger for BicycleA wall hook for a bicycle. Space can be effectively used, so space can be saved efficiently. The hook has a protective cover so it won't damage the bike frame. It also comes with a convenient hook in the middle where you can hang a helmet. The hanger part can be flipped up. For bicycle storag... Read MoreMass (kg) 0.9 Allowable Load (kg) 20 Width (mm) Hook inner width: 68 Included Accessories Screw plug Material Steel
- DAIKEN Independent cycle stand (CS-M type)Reasonably priced steel type * When stored with both feet standing upright * Construction, assembly, foundation work, soil concrete work, and anchor work are not included. * CS-M / MU / H types are set in the standard size of bicycles of 18 inches or more. * Depending on the size and shape of the... Read MoreApplicable tire size 18-27 inch Material Rack: Steel Included Accessories With anchor bolt (steel M8 x 2)
- MonotaRO Bike Maintenance StandIt is a bicycle maintenance stand. Useful for setting up your bike. Compatible with various sizes such as bicycles, road bikes, mountain bikes, and racing bikes. There is also a tray on which tools can be placed, which is convenient. For bicycle maintenance * Do not use for any other purpose.Allowable Load (kg) 30 Mass (kg) 7 Dimensions, Width W x Depth D x Height H (mm) 970×970×1130～1960 Material Steel
- MINOURA Wall-Mounting Display Hook (for Road)The arm protrudes shorter than the conventional "BIKE HANGER 4", and the wall-mounted display attachment for road bikes with narrow handlebars saves space when exhibited and is a foldable hook that does not take up space when unnecessary. With a protective cover to prevent damage to the... Read MoreMaterial Steel
- BIKEHAND Display StandA tire-holding stand that makes bicycle parking and repair work easy. Boxed 24-29 inchesWidth (mm) 430 Length (mm) 440 Height (mm) 850 Material (Main Unit) Iron, plastic
- SHOWA INDUSTRIES Bicycle standA sports bike stand that can be used by hooking it on the saddle frame. It is ideal as a daily stand because you can easily park your bicycle just by hooking it on the saddle. Regardless of the shape and material of the seat pillar and frame, it can be used even with the wheels removed, expanding... Read MoreMass (kg) 2 Height (mm) About 1090 Allowable Load (kg) About 20 Material Steel
- MINOURA Hook type maintenance standEasy maintenance stand just by hanging the saddle Compact design that can be folded and is convenient for storage and carryingClamp height (mm) 1050 Allowable Load (kg) 15 Mass (g) 2200 Installation Dimensions, Width W x Depth D (mm) 650×450 Color Black
- DAIKEN Independent cycle stand (CS-C type)An independent type bicycle rack (cycle stand) that does not use a base. Can be installed freely according to the construction site. Compatible with infant bicycles and electrically power assisted bicycles! A compact and rounded design that fits casually into the space. It can be installed freely... Read MoreApplicable tire size 12 to 28 inches Width (mm) 125 Height (mm) 154 Length (mm) 290 carrying capacity (kg) 40 or less Applicable Tire Width (mm) 60 or less Color Black Type Independent type Material Rack: Steel Dimension (mm) Φ19 × 1.5 steel pipefrom S$179.90Min. 2 days
- YAMAZEN Cycle garage (for 2 cars)Easy to fold cycle garage for 2 bikes. UV protection 99.9% or higher & water repellency 4th grade. It can be folded compactly when not in use, so it does not take up space. The arm can be easily fixed with U-shaped fixing parts. Since there are 7 drain holes, it is difficult for water to coll... Read MoreMain Unit Dimensions, Width W x Depth D x Height H (mm) 1910×1085×1360 Mass (kg) 8 Time to Assemble About 20-30 minutes Specification Assembly Included Accessories Fixed pegs (stakes) x 4 Type For two bicycles Installation Insert the pegs (stakes) and fix them. Material PVC, steel
- MINOURA Front Wheel Lifting Display StandThe wheel support of the previous model DS-4100 has been improved, and the holding power has been further improved by changing the installation distance of 3 tires. From thick MTB tires to thin road tires, you can easily make your bike stand on its own by putting the lifted front wheels in the fr... Read MoreMass (kg) 10.2 Width (mm) 1000 Length (mm) 500 Height (mm) 950 Color Black
- MINOURA Rear hub stand (for 29 inch)A rear hub stand for 29 inches. (Compatible with 700C to 29 inches) It is a type of stand that holds the rear wheel hub shaft from the left and right and lifts the rear wheel to stand on its own. The coupling on the quick lever side (left side) can be rotated freely, and the quick release lever c... Read MoreApplicable wheel diameter 125mm for road to 145mm hub for MTB Mass (g) 720 Color Black Material Steel
- YUEN-I Stand 29er compatibleCompatible with 29er, a basic rear wheel axle mount type stand.Width (mm) 31 Height (mm) 45 Length (mm) 470 Material (Main Unit) Iron, plasticfrom S$46.99Min. 7 days
- Park Tool Power lift shop repair standThe definitive edition of a repair stand for shops that realizes comfortable workability and high stability. The electric lift allows you to raise and lower the bicycle with a single switch according to your work. With a maximum load capacity of 54 kg, it can handle heavy downhill bikes and elect... Read MoreHeight adjustment range (mm) Clamp / 230-1980 Overall Length (cm) 239 Specification Clamp pressure adjustment: Possible Clamp Diameter (Φmm) (Adaptation) 23-76 Allowable Load (kg) Clamp / 54 Range of movement Clamp / 360 °from S$6,899.00Min. 64 days
- MINOURA 971 Rear wheel support for exhibition standOptional parts to be attached to the standard "971" type (Hinadan type display stand) as a bicycle shop fixture Instead of the 971 type standard BB receiver, the entire rear wheel is received by the cradle to hold the bicycle. Even if the model (frame shape) is different, stable exhibit... Read MoreInner width W (mm) (Cradle) approximately 54 Color Gray metallicfrom S$55.99Min. 6 days
- MINOURA Bicycle Stand Wheel Holder for DS-4200 (for 1 Unit)The holding power is further increased by partially extending the frame of the wheel holder for DS-4100. It is movable and fits flexibly according to the tire size. The inner width of the wheel receiver for MTB thick tires to thin road tires is 66 mm, and it is possible to store tires up to 2.5 i... Read MoreInner Width (mm) 66 (supports up to 2.5 inches) Color Black
- Park Tool Wheel holderA wheel holder that can fix the wheel at three angles (0, 35, 90 degrees). The holder can be fixed with bolts or a vise. Supports 12, 15 and 20 mm through axles and quick releases.from S$289.90Min. 5 days
- Park Tool Backrest kitShop stool backrest option. * Cannot be attached to the conventional STL-1 and STL-2.Specification For STL-1.2from S$149.90Min. 64 days
- MINOURA Display shelf for 3 dollsIt is a completely newly designed three-stage pedestal type bicycle display stand that can display electrically assisted vehicles that are heavier than ordinary vehicles with plenty of room. It is an exhibition fixture mainly for displaying bicycles in shops, and by displaying three bicycles in t... Read MoreColor Gray metallic Installation Dimensions, Width W x Depth D (mm) 1800×950from S$869.90Min. 6 days
- NAN-A CORPORATION Cycle house + tent* This item is a tent only.Fabric Metallic silver 4000 cross cloth Material Polyethylene sheetfrom S$239.90Min. 7 days
-
- PALMY Electric Bicycle Compatible Repair StandIt is a hook-type repair stand that can be used not only for general vehicles but also for heavy electric bicycles. A quick release is used for the height adjustment lever. It can be used for heavy-duty bicycles because it penetrates the joint between the support and the base, is reinforced with ... Read MoreMass (kg) 2.35 Allowable Load (kg) 40 Dimensions (H x W x D) (mm) 560～850×430×307 Color Silver Material Steel
- MINOURA Rear Hub Fixed StandA standard stand that sandwiches the rear axle from the left and right. The most commonly seen type of stand that holds the rear wheel hub shaft from the left and right to lift the rear wheel and make it stand on its own. The main body is made of iron pipe, and its elasticity is used to firmly sa... Read MoreMass (kg) 0.7 Suitable Size 20.26 inch / 700C Storage Dimensions, L x W x H (mm) 420×305×40 Color Black Material Iron Dimensions (H x W x D) (mm) When deployed / 380 × 305 × 285
- Veloline Bicycle stand L-shapedMass (kg) About 1.5 Size (mm) About 770 × 380 × 440 Applicable Tire Width (mm) Less than about 65 Material Steel Applicable tire size ~ 29 inch 700C
- DAIKEN Independent cycle stand (CS-G type)Specifications that the speed sensor of the electrically assisted bicycle made of hot-dip galvanized steel with excellent durability does not hit * When stored with both feet standing upright * Construction, assembly, foundation work, soil concrete work, and anchor work are not included. * CS-G /... Read MoreWidth (mm) 155 Applicable tire size 20-28 inch carrying capacity (kg) 40 or less Applicable Tire Width (mm) 55 or less Color Plating color Material Rack: Steel Included Accessories With all anchors (steel M6 x 4)from S$199.90Min. 5 days
- FF-R Bicycle Stand CFIt is a stand that supports the quick release of the rear wheels that supports from Shimano to Campagnolo Fulcrum with one unit. The height can be adjusted to 2 sizes, 26 inch / 700C and small wheel bike, by simply changing the opening direction of the stand to the left and right, and it supports... Read MoreMaterial Steel Dimensions, Height x Width x Thickness (mm) When stored / 415 × 330 × 40 Included Accessories Wide lever cup
-
- MINOURA Bike hanger 4 (wall-mounted foldable hook)A wall-mounted or pillar-mounted bicycle storage hook that allows you to hang the top tube on the hook to hold your bicycle horizontally. Depending on the mounting position, the bicycle can be stored in two upper and lower tiers like a bike tower. The hook can be flipped up when not needed. The h... Read MoreMass (kg) 1.2 Material Iron
- Park Tool Bicycle Storage HookBicycle hook. A highly rigid hook that uses metal with a diameter of about 7 mm and can withstand the weight of the finished vehicle.
- MISUGI Cycle positionIt is a fashionable bicycle rack (cycle rack) made of resin. 3 color variations to choose from (you can choose according to your location and taste, such as houses, stores, and public facilities) Smooth loading and unloading! Easy bicycle parking with a light push. Prevents the bicycle from tippi... Read MoreApplicable tire size 18-28 inches Height (mm) 235 Width (mm) 300 Length (mm) 500 Mass (kg) 6 Material Resin (plastic) Applicable Tire Width (mm) up to 55
- NAN-A CORPORATION Cycle house front curtainIt is the first curtain of the cycle house of Nanei Kogyo Co., Ltd.
- Park Tool Handlebar holderA holder for fixing the handle and front area so that they do not move carelessly when the bicycle is installed on the repair stand. It is compatible with 32mmΦ handles and 50mmΦ top tubes, and can be used with most bicycles.Mass (g) About 390 Dimension (mm) About 390 × 120
- MINOURA Hook display standA display stand that allows you to easily make your bicycle stand on its own by simply placing the bicycle chain stay on the hook. The size adjustment spacer built into the part allows you to use it for different end widths on both MTB and road bikes. * DS-40CS is a storage / exhibition stand and... Read MoreMass (g) 730 Color Black Material Steel, resin
- DAIKEN Independent cycle stand (CS-H type)Simple and easy-to-use front wheel insertion type * When stored with both feet standing upright * Construction, assembly, foundation work, soil concrete work, and anchor work are not included. * CS-M / MU / H types are set in the standard size of bicycles of 18 inches or more. * Depending on the ... Read MoreApplicable tire size 18-27 inch Material Rack: Steelfrom S$159.90Min. 2 days
- MINOURA Steel Heavy Duty Work StandIt is designed for indoor use. The frame is made entirely of iron for solid stability. In addition, the legs can be squeezed by lifting the main body in consideration of storage when not needed. The height of the clamp is fixed at 1.41m from the floor. The bike can be clamped to the seatpost or t... Read MoreInstallation Dimensions, Width W x Depth D (mm) 660×600 Mass (kg) 8.0 (including parts pan) Height (mm) Clamp/1410 (fixed) Color Gray Material Iron Allowable Load (kg) up to 30
- DAIKEN Independent cycle stand (CS-MU type)Durable stainless steel type * When stored with both feet standing upright * Construction, assembly, foundation work, soil concrete work, and anchor work are not included. * CS-M / MU / H types are set in the standard size of bicycles of 18 inches or more. * Depending on the size and shape of the... Read MoreApplicable tire size 18-27 inch Material Rack: Stainlessfrom S$229.90Min. 6 days
- MINOURA Rear hub stand Through axle compatible700C standard design model with a shorter pipe length and lower installation height of the "DS-30MP" that uses a new coupling that supports various quick levers. Compared to the "DS-30MP" that supports up to 29er, by limiting the compatible model to 700C, it is possible to hol... Read MoreDimensions (H x W x D) (mm) 385×305×285 Dimensions (Length L x Width W x Thickness) (mm) 420 x 305 x 40 (when stored) Mass (g) 700 Color Black Material Steel Included Accessories Through axle adapter
- MINOURA Rear hub stand Exclusive for Kampa, Fulcrum, BontragerA stand that holds the rear wheel hub shaft from the left and right and lifts the rear wheel to stand on its own. Two types of couplings are attached as a model exclusively for Campagnolo, Fulcrum, and Bontrager with a special wide quick lever, and can be selected according to the component and v... Read MoreMass (g) 700 Color Black Material Steel
