Printers / Scanners / Projectors

The myDO tack sheet is a 3D printer bed that uses a special process on the surface of the sheet to make the initial layer (first layer) of the modeling material with heat shrinkage such as ABS, PC (polycarbonate), and TPE (polyester soft type filament). It is a high-performance sheet made in Japa... Read More

A projector projection screen that is magnetic and can be easily attached to a steel surface. The surface is a matte whiteboard film material that can be erased with a whiteboard marker pen. A soft and thin lightweight magnet sheet material. Includes marker pen (red / black), eraser, and tray.

A class 3R compliant laser pointer that achieves surprisingly high brightness with 5 times the output of a class 2 green light laser. Ideal for presentations in bright places or in large auditoriums. It is a highly visible green laser beam with a wavelength of 532 nm, which is said to be easy for... Read More

A retransfer card printer that can print to IC cards. A re-transfer type card printer that can print the entire surface up to the edge of the card. With a high resolution of 600dpi, photos are vivid and even small characters are printed clearly. Printing is possible on IC cards such as FeliCa car... Read More

A green laser pointer that has better visibility than red and flies far away. With a convenient touch pen that can operate smartphones and tablets For presentations at meetings, etc. * Never look directly at the laser beam * Do not direct the laser beam toward people or creatures * Do not allow c... Read More

The entry model pigment black ink with a compact and sophisticated design is characterized by the fact that even fine characters do not bleed clearly. In addition to the standard capacity type, a large capacity type is available. You can choose according to the amount and frequency of printing. I... Read More

Functionally stretchable It is convenient for explanations in seminars, meetings, and classes.

Compact and easy-to-carry laser pointer With a strap hole that is convenient to carry The cap at the tip can be replaced, so you can irradiate two types of dots and arrows. With mark For presentations at meetings, etc. * Never look directly at the laser beam. * Do not direct the laser beam toward... Read More

It is easier to see than red and is overwhelmingly bright, about 8 times brighter. A pen-type green laser pointer that is easy to see with a laser reach of about 200 m.

It is ideal not only for presentations using projectors and OHPs, but also for work instructions from a remote location in dangerous places such as construction sites. It can be used in various scenes because it does not damage the irradiated surface even if you point to delicate objects in expla... Read More

Instruct where it cannot be reached Uses a highly visible green laser that is easy to see even in bright places such as outdoors. Consumer product safety law compliant product (conformity inspection certification number: JQC10319).

Uses green light (532 nm), which is about eight times easier to see than red light (650 nm). It can be used in bright places such as under fluorescent lights and in large places such as academic societies. Impact-resistant brass body. In addition to presentations, it can also be used for work ins... Read More

Great for work instructions at construction sites! The pen type allows you to give accurate instructions even from a long distance using a laser. It is also convenient to carry. For housing repair work, building and warehouse maintenance, confirmation, construction site, construction site area wo... Read More

It is ideal not only for presentations using projectors and OHPs, but also for work instructions from a remote location in dangerous places such as construction sites. It can be used in various scenes because it does not damage the irradiated surface even if you point to delicate objects in expla... Read More

Environmentally friendly material PLA filament is a polylactic acid resin composition derived from sugar-containing plants such as corn or sugar cane and is considered to be the most environmentally friendly 3D modeling material. When the PLA filament model is buried in the soil, it decomposes na... Read More

It is a telescopic pointer that is convenient for meetings and training. * Ballpoint pen is not included at the tip

Ideal for presentations and classes.

Lightweight and compact clip type that can be carried in a notebook or pocket and is convenient to carry. Can also be used as a ballpoint pen by removing the cap at the tip. * Do not point the tip toward a person. It may cause injury. * Do not use for any purpose other than as a pointer.

Since the laser shape can be switched to four, point type, round type, linear type, and arrow type, You can make an effective presentation according to the contents of the slides and the size of the venue. The laser shape can be easily switched by simply turning the upper ring. Since it uses a hi... Read More

Battery lasts long, operating time is about 40 hours. A pen-type red laser pointer that is easy to see with a laser reach of about 100 m.

It is a simple wall-mounted projector screen. The screen can be rolled up and stored when not in use. It can be used as a simple tripod type with the optional tripod. It is lighter than a normal tripod type, and the projector screen and tripod can be separated, making it easy to handle. As a wall... Read More

It fits in a small chest pocket and is convenient to carry. A red laser pointer with a total length of about 88.5 mm and a weight of 15 g, which is compact and lightweight and convenient to carry.

Red laser compact type that is easy to store in your pocket Uses a 635nm laser diode that has a short wavelength and is brighter and easier to see. It feels about twice as bright as the general 650nm type. Easy to use with a single AAA battery. * The PSC mark is displayed in conformity with the t... Read More

Filament type resin for 3D printers. PLA resin has little heat denaturation and is easy to model even large ones. It is less elastic than ABS resin and surface processing is difficult. ABS resin has high heat resistance, and is more adhesive and stronger than PLA resin. It can be painted with pla... Read More

Compatible with USB unit type IEEE802.11b (1-14ch) and IEEE802.11g / n (1-13ch). Please see the Epson homepage for details of the specifications (epson.jp/lcp/lan.htm)

Compared to the red laser, the reach of the beam is longer and the visibility is higher. Consumer product safety law compliant product.

Present with confidence Intuitive slideshow control is possible. Regardless of the room brightness or the type of display, you can see at a glance which part of the material you are referring to. No ready-to-use software required, just plug the receiver into a USB port and you're ready to go.... Read More

A document camera that connects via USB and does not require a power supply. 8 megapixel autofocus camera, capable of capturing fine text and details of small subjects. The LED light is mounted on the camera body. It can be turned on / off with the button mounted on the camera. It can be stored v... Read More

The guideline is clearly displayed with a laser in places where marking is not possible. Since there are 3 rotating parts, it is possible to irradiate the line in all directions, up and down, left and right, and 360 degrees. Since the pedestal is a magnet, it can be easily installed. The guidelin... Read More

The projector can be installed in a small space, and it does not take up space even if it is put away when not in use. The top plate has a guard to prevent the equipment from falling. The height can be adjusted from 65 cm to 100 cm. With casters that are easy to move, you can easily adjust the pr... Read More

The work process is positioned by irradiating the laser line. The high brightness laser element of 10mW is adopted. The focus can be adjusted, and the laser line is projected sharply according to the distance. The irradiation direction can be freely adjusted with the gantry. Positioning of work p... Read More

An emerald green laser pointer with a high-brightness LED light and IP64-compliant dust-proof and drip-proof specifications that is effective in a variety of situations, from logistics to construction and construction sites. It is equipped with a green light emerald green laser that is said to be... Read More

A tripod for the projector screen (wall-mounted type).

It is a stand on which two devices such as a projector and a notebook PC can be installed on the top plate and the middle shelf. It can be used for presentations and simple standing work. The angle of the top plate can be adjusted by about 12 degrees. The height of the top plate can be adjusted i... Read More

With a clip that is convenient to carry, you can easily carry it. Uses easily available AAA batteries. Battery life is about 4 hours. Thorough quality control with domestic production. 100% inspection of light emitting parts and products. For physics and chemistry experiments ・ When you want to ... Read More

Print platform tape for XYZ printing "Da Vinci Jr."