Urea water supplies

This pump set is ideal for transferring AdBlue and water. For IBC tank for AdBlue / water transfer

A flow meter that shows the flow velocity and integrated flow rate. * The attached battery is for the monitor. * The meter is advanced due to the configuration test run.

By connecting to the outlet of the IBC tank, AdBlue / urea water can be transferred and supplied by its own weight drop. With gun nozzle * Please note that the packing at the connection port is easy to lose.

Connect to the IBC tank outlet to remove AdBlue / urea water. With valve * Please note that the packing at the connection port is easy to lose.

A manual pump kit that attaches to the Chemidrum to transfer and supply AdBlue / urea water.

It is a manual gun nozzle for AdBlue and water. For transfer and subdivision of AdBlue

A cap that can bleed the air from the tank when it is transferred and supplied from the IBC tank.

It is an auto stop gun nozzle that detects a full tank and automatically stops when transferring and supplying. Φ19 hose connection with swivel

A gun nozzle that conforms to the ISO standard water supply caliber Φ19, which is used in light trucks, imported trucks, construction machinery / agricultural machinery, etc. ※made in Italy Connect to the tip of the hose to supply AdBlue / urea water in a clean state.

Turbine digital battery-powered flowmeter. Calibration can be performed for each liquid used. For AdBlue / water measurement * Cannot be used for commercial purposes.

Adblue gun nozzle ADN dedicated cap (with chain and S-shaped hook). Snap it into the tip of the ADN nozzle. Hang the S-shaped hook on the frame of the IBC or the edge of the plastic drum.

A transfer and supply pump kit for AdBlue / urea water that can be attached to the IBC container. With flow meter and auto stop gun nozzle * When taking power from the vehicle, be careful of running out of battery. * Be sure to open and close the valve of the IBC tank and bleed air. * The attache... Read More

A pump set that is ideal for transferring AdBlue and water. For AdBlue / water transfer, for poly drums * Drums are sold separately.

The integrated / total integrated flow rate of the pump is simply measured. It is used by mounting it between the tip of the pump hose and the gun nozzle. * A separate hose nipple may be required. * Avoid using with a self-weight drop hose as the accuracy will deteriorate due to insufficient flow... Read More

A gun nozzle that conforms to the ISO standard water supply caliber Φ19, which is used in light trucks, imported trucks, construction machinery / agricultural machinery, etc. ※made in Italy Connect to the tip of the hose to supply AdBlue / urea water in a clean state.

The cheapest and simplest gun nozzle. With lever holding function Connect to the tip of the Φ25 hose to supply AdBlue / urea water in a clean state. If durability is important, please purchase the AdBlue / urea water gun nozzle [ADN series].