A tool for tightening and loosening the one-touch elbow connector used for trucks of 4 tons or more. The width across flats of 34 mm is for tightening and loosening the check valve connector used in Isuzu trucks. It can also be used to tighten and loosen elbow connectors (L-shaped piping joints) ... Read More
For filter paper replacement For removing the cover of the resin fuel filter case
Conform to 12 points Main Compatible Genuine Part No. 8-98158458-1 Size (mm) 84 Square Drive (mm) 9.5 RoHS directive (corresponding to 10 substances) Correspondence Applicable Engine Type Elf_4JJ1
Convenient for removing tubes from one-touch fittings used in air-controlled vehicles such as large vehicles.
For removing tubes from one-touch fittings
* Do not use for anything other than its intended purpose.
Overall Length (mm) 188 Set Contents 6×8、10×12、15×16、18×1/2" Material S45C (carbon steel)
Essentials for large tire replacement
For tire replacement
* Please do not use for any other purpose. * Be careful of your surroundings while working and carrying.
Mass (kg) 2.15 Overall Length (mm) 947 Material CRV
Compatible with 33-41 mm nut cover sizes Long design that reaches the nut cover deep in the rear The head and grip parts that sandwich the nut cover are made of non-slip material, and the nut cover can be attached and detached smoothly.
Exterior parts
* Can also be used for nut covers for ISO wheels
A wheel setting bolt that can be easily positioned when installing a lock bolt type wheel. You can prevent it from falling when the wheel is removed.
Positioning guide bolt when attaching and detaching the wheel
* Do not use for any purpose other than its intended purpose.
A labor-saving tool that can be used with a single wrench to tighten and loosen the outer nut and inner nut. The pin removal prevention mechanism AMBAC (Unback) system (PAT.) Is adopted.
* Please use the specially designed ABP8-4120HTP for the genuine parts rear wheel nuts (JIS method 5 holes / 6... Read More
A labor-saving tool that can be used with a single wrench to tighten and loosen the outer nut and inner nut. It is a thin type and is also effective for vehicles with a small clearance between the wheel hub and wheel nut. We have prepared sizes that can handle everything from medium-sized vehicle... Read More
Compatible with new ISO type wheels (sleeve nut type not possible) Prevents damage to the hub bolt. Centering is easy by using two diagonally on one wheel. The body has a matte finish to prevent slipping and is easy to remove. If it is difficult to remove, use the hexagon (12mmHEX) at the tip and... Read More
Overall Length (mm) 150 Diameter (Φmm) 25.5 Mass (g) 400 RoHS directive (corresponding to 10 substances) Correspondence Included Accessories Sidebar (for removal)
Very light and easy to use. Very sturdy with vanadium extra alloy (forged). Since R is attached to the front, you can remove the tire smoothly without damaging the aluminum wheels. A lacquer finish that gives a special bend to the tip.
Trusco Part No. 252-0877 Mass (kg) 1.36 Finish lacquer Overall Length (mm) 600
The outer diameter is the smallest in the industry, and since it does not come into contact with obstacles such as the center of the wheel, it is easy to work in narrow spaces and the weight is reduced, so work fatigue is reduced. The surface treatment is white unichrome plating, which is more re... Read More
A socket for attaching and detaching inner nuts for large vehicles.
* Insert the impact inner socket all the way into the inner nut square before using it.
Dimension L 1 (mm) 21 Square Drive (mm) 25.4 Dimension D 2 (mm) 48 Dimension L (mm) 72
Dedicated socket for truck wheel nuts (outer nuts and inner nuts). A labor-saving tool that allows you to attach and detach outer nuts and inner nuts with a single socket. The hexagonal part uses a strong drive, and the wrench side square has an R to improve durability.
Outer nut / inner nut atta... Read More
Wheel nuts for large vehicles (outer nuts / inner nuts) Detachable socket. A labor-saving tool that allows you to attach and detach outer nuts and inner nuts with a single socket. The hexagonal part uses a strong drive, and the wrench side square has an R to improve durability.
Wheel setting guide for ISO wheel 10 holes and 8 holes. Easily install wheels, prevent problems such as screw thread breakage, and improve work efficiency.
Overall Length (mm) 177 Inner Diameter (Φmm) 22 Outer Diameter (Φmm) 254 Mass (g) 500 Material Steel
Can be used for both left and right Boost input 1NM: Output 68NM
* Cannot be used for imported car type 10 holes.
Square Drive (mm) 25.4 Dimension (mm) 33, 41 (outer socket), 21 (inner socket) Suitable for Both left and right can be used RoHS directive (corresponding to 10 substances) Correspondence
Since the caliber depth is shallow, the socket does not come into contact with the washer of the nut or the wheel.
Recommended for new ISO nuts, aluminum wheels and painted wheels.
Dimension l (mm) 18 Dimension S (mm) 33 Dimension D2 (mm) 48 Dimension D1 (mm) 49 Mass (g) 531 Overall Length L (mm) 70 O-ring 8-OG Pin Type 8-P1
One-touch mounting, no internal screw type.
* We recommend that you ask a maintenance company to replace this product. Compensation may not be possible if the replacement work is done individually.
Overall Length (mm) 107 Inner Diameter (Φmm) 22 Outer Diameter (Φmm) 26 RoHS directive (corresponding to 10 substances) Correspondence ISO standard M22XP1.5
A compact type that allows you to work with one hand even in a narrow space. It has excellent durability with a stainless steel plate attached. With stepped processing on the inner diameter side, it can also be used for tubes wrapped with vinyl tape. A tool for removing the air brake tube used in... Read More
Mass (g) 68 Trusco Part No. 464-5448 Suitable Tube Φ6mm、Φ8mm、Φ10mm、Φ12mm、Φ15mm、Φ16mm
Since the diameter is shallow and the outer diameter is small, the socket does not come into contact with the wheel. The best socket for aluminum wheels.
Dimension l (mm) 15 Square Drive Size 25.4(1/1") Dimension S (mm) 41 Dimension D2 (mm) 48 Mass (g) 530 Dimension D1 (mm) 57 Overall Length L (mm) 74
For adjusting the expander brake
* We recommend that you ask a maintenance company to replace this product. Compensation may not be possible if the replacement work is done individually.
RoHS directive (corresponding to 10 substances) Correspondence
A socket for attaching and detaching inner nuts for large vehicles. We have prepared a size that can accommodate from medium-sized vehicles to large-sized vehicles.
* Insert the impact inner socket all the way into the inner nut square before using it.
Square Drive (mm) 19 Dimension L 1 (mm) 21 Dimension D 2 (mm) 38 Dimension L (mm) 66