Inserters & Removers for Truck

You can easily remove the nylon tube from the one-touch connector of the air brake.

Convenient for removing tubes from one-touch fittings used in air-controlled vehicles such as large vehicles. For removing tubes from one-touch fittings * Do not use for anything other than its intended purpose.

A compact type that allows you to work with one hand even in a narrow space. It has excellent durability with a stainless steel plate attached. With stepped processing on the inner diameter side, it can also be used for tubes wrapped with vinyl tape. A tool for removing the air brake tube used in... Read More

"ABC-0616" is a pliers type that can easily remove the fixed tube, and by changing the tapered claw, you can pull out a multi-size tube. (Corresponding tube diameter: Φ6 ~ 16mm) "ABC-713" is a gantry puller ideal for work in tight spaces. Also ideal for both types of cave coup... Read More

When replacing the hub bolt! Bearings reduce the burden on bolts and nuts! By using a thrust bearing-shaped inserter when replacing the hub bolts of light vehicles to 4t trucks, the load applied to the bolts and nuts can be reduced and the screws can be firmly fixed without damaging them. Suitabl... Read More

It is designed to be easy to push (pull) according to the outer diameter of the tube connection part of the one-touch fitting. With a grip, it is easy to handle and it is easy to apply force, leading to improved workability. Made of stainless steel (18-8), it does not rust easily. For removing tu... Read More

ABC-200 separately. Tubes fixed with pliers can be easily removed, and tubes of each size can be removed by changing the tapered claws. * Be sure to apply grease etc. to the screw and moving parts before use. * Please do not use impact wrench.

ABC-200 separately. The gantry puller is ideal for fishing in tight spaces. It can be held with a double-ended tube coupler set. * Be sure to apply grease etc. to the screw and moving parts before use. * Please do not use impact wrench.

It prevents you from pushing the lock more than necessary when unlocking the connector, and you can work while preventing damage to the connector. Unlock and remove the urea water piping connectors (quick connectors 7.89mm, 9.49mm) used for medium-sized and large buses and trucks.

Crankshaft front oil seal insertion compatible genuine part number: XZ1262E (oil seal)

Quickly pull out the anchor pin of a large truck with a slide hammer. * Slide hammer is sold separately.

Attachment set for press-fitting work such as bearing oil seals. Large diameter size.

With a long handle length of 200 mm, it is easy to grip and easy to use even in deep places. It is a durable stainless steel type. Japanese car standard 6 sizes

Crankshaft oil seal replacement

Easily replace the metal bush of the shackle with hydraulic pressure !! With 10t hydraulic pump

For inserting the crankshaft oil seal

For removing the wind mall.

Hub bolt driving support tool for large vehicles. Dedicated to hub bolts for M20 and M24 JIS standard wheels. You can hit the brim instead of the head of the bolt. * Cannot be used for ISO standard hub bolts with a thick root.

You can quickly remove the joints such as tie rods of large vehicles by tapping them. M20P1.5 M24P1.5 M24P2.0 Knock adapter set.

For Isuzu vehicles only. The wheel hub holder can be installed "safely, securely and easily". Bearings are mounted on the hub side, and wheel hubs for Isuzu vehicles (4t to large vehicles) can be installed "safely, securely, and easily" with 6 types of attachments and pullers.... Read More

The hub bolt can be replaced by the power of flood control.