Uses an anti-glare flat lens that makes it easy to get a sense of distance. Follow the blind spots that cannot be captured with a genuine mirror. The metal part is rust-resistant stainless steel!
Exterior parts
* This product is compatible with mirror stays of 20 to 32 mmΦ.
Suitable for 20-32mmΦ mirror stay Dimension (mm) 216 x 154 (excluding stay part) Dimensions, Width W x Depth D x Height H (mm) 216×60×154
Please use it for repair or spare in case of damage!
Exterior parts
* Specifications are different from genuine products. * Please check the mirror size of your car before purchasing. Our mirror cover may not be attached. Please note.
Uses an anti-glare flat lens that makes it easy to get a sense of distance. Follow the blind spots that cannot be captured with a genuine mirror. The metal part is rust-resistant stainless steel!
Exterior parts
* This product is compatible with mirror stays of 20 to 32 mmΦ.
Dimension (mm) 160 x 122 (excluding stay part) Body dimensions (width W x height H x depth D) (mm) 160×122×55 Suitable for 20-32mmΦ mirror stay
"Three-layer plating greatly improves durability!" Beautiful plated finish. Cover type! A plated mirror cover SET that is easy to install and has a high dress-up effect.
* 170Φ car with under mirror (custom car is not possible) * The shape of the under mirror is different for 1t to 1.5t... Read More
Uses an anti-glare flat lens that makes it easy to get a sense of distance. Follow the blind spots that cannot be captured with a genuine mirror. The metal part is rust-resistant stainless steel!
Exterior parts
* Cannot be installed on vehicles with curved genuine mirror stays such as Isuzu 2t U... Read More
Dimension (mm) 160 × 122- (Stay part 100) Suitable for 20-32mmΦ mirror stay
It can be used for the back shot mirror FUJI series, Vsr1s, Ver2s, Ver9s, and Starlight Ver1s made by Jet Inoue.
Exterior parts
* Back shot mirror is not included.
Thread Pitch 10×1.25 Dimension (mm) 50×15Φ Material Brass
"Three-layer plating greatly improves durability!" Beautiful plated finish. Cover type! A plated mirror cover SET that is easy to install and has a high dress-up effect. It will be attached with double-sided tape, but it can be attached more stably if you fix it with the attached screws... Read More
Assists in safe driving! Rear safety measures mirror Round anti-glare flat lens, made of stainless steel
Exterior parts
* Because the bolts and nuts are made of stainless steel, be careful not to bite when tightening.
Suitable for 20-32mmΦ mirror stay Diameter (Φmm) 200 Dimension (mm) 200Φ Type of Terminal Fitting Band fixed Material (Mirror) Chrome plane mirror Material SUS304
Assists in safe driving! Rear safety measures mirror Round anti-glare flat lens, made of stainless steel
Exterior parts
* Because the bolts and nuts are made of stainless steel, be careful not to bite when tightening.
Diameter (Φmm) 150 Dimension (mm) 150Φ Suitable for 20-32mmΦ mirror stay Type of Terminal Fitting Band fixed Material (Mirror) Chrome plane mirror Material SUS304
"Three-layer plating greatly improves durability!" Beautiful plated finish. Cover type! A plated mirror cover that is easy to install and has a high dress-up effect. It will be sold separately, so please use it for repairs!
* It will be attached with double-sided tape. * May 1999-Januar... Read More
"Three-layer plating greatly improves durability!" Beautiful plated finish. Cover type! A plated mirror cover SET that is easy to install and has a high dress-up effect. It will be attached with double-sided tape, but it can be attached more stably if you fix it with the attached screws... Read More
"Three-layer plating greatly improves durability!" Beautiful plated finish. Cover type! A plated mirror cover SET that is easy to install and has a high dress-up effect. It will be attached with double-sided tape, but it can be attached more stably if you fix it with the attached screws... Read More
Back shot mirror for trucks Round entanglement prevention mirror Chrome plated. Easy installation by simply sandwiching it between genuine mirror stays. It is a magnifying mirror specification of a flat lens.
Mounting Dimensions (mm) 21～24 Mirror surface dimensions (mm) About: 132 vertical × 132 horizontal Dimensions, Height x Width (mm) About: 150 x 220 (including stay part) Type Round type
Back shot mirror Square type TYPE1 Entrainment prevention mirror Chrome plating. Easy installation by simply sandwiching it between genuine mirror stays. It is a magnifying mirror specification of a flat lens.
Mirror surface dimensions (mm) About: Vertical 100 x Horizontal 133 Mounting Dimensions (mm) 21～24 Type Square Dimensions, Height x Width (mm) About: 120 x 210 (including stay part)
Back shot mirror Square type TYPE3 Entrainment prevention mirror Chrome plating. Easy installation by simply sandwiching it between genuine mirror stays. It is a magnifying mirror specification of a flat lens.
Mounting Dimensions (mm) 21～24 Mirror surface dimensions (mm) About: Vertical 110 x Horizontal 133 Dimensions, Height x Width (mm) About: 125 x 215 (including stay part) Type Square
Back shot mirror Square type TYPE4 Entrainment prevention mirror Chrome plating. Easy installation by simply sandwiching it between genuine mirror stays. It is a magnifying mirror specification of a flat lens.
Type Square Mirror surface dimensions (mm) About: Vertical 102 x Horizontal 162 Mounting Dimensions (mm) 21～24 Dimensions, Height x Width (mm) About: 120 x 240 (including stay part)
"Three-layer plating greatly improves durability!" Beautiful plated finish. Cover type! A plated mirror cover SET that is easy to install and has a high dress-up effect. It will be attached with double-sided tape, but it can be attached more stably if you fix it with the attached screws... Read More
Back shot mirror Square type TYPE2 Entrainment prevention mirror Chrome plating. Easy installation by simply sandwiching it between genuine mirror stays. It is a magnifying mirror specification of a flat lens.
Type Square Dimensions, Height x Width (mm) About: 135 x 225 (including stay part) Mounting Dimensions (mm) 21～24 Mirror surface dimensions (mm) About: Vertical 120 x Horizontal 140
Just cover it with a genuine mirror! Anyone can easily install it! Easy to dress up with a cool black carbon finish! Double-sided tape is attached to the back side. Only double-sided tape can be covered, so wipe it clean in advance before covering.
It is a mounting stay for exclusive use of the back shot mirror classic made by Jet Inoue.
Exterior parts
* Mirror is sold separately. * Door opening may vary depending on the vehicle. Please note that it may be necessary to bend the angle of the bar for adjustment, or it may not be possible to i... Read More
Manufacturer ISUZU Color Mirror surface Included Accessories Mounting torx wrench Material Stainless steel
Uses an anti-glare mirror that prevents driving visibility from being blocked by light reflections from following vehicles! The flat mirror makes it easier to see when backing up! It can be attached to genuine mirror stays of 20mmΦ to 32mmΦ.
* Back shot mirror Since it is a repair member exclusi... Read More
Mirror cover set 4-piece set SE custom car side mirror left and right electric remote control mirror car
Exterior parts
*Some vehicles are equipped with mirrors that differ from the contents of the mirror cover set set by the manufacturer. *There may be cases where non-genuine mirrors are install... Read More
Following the standard product black, stainless steel is now available. Please use the stainless steel mirror stay and the plated back shot mirror according to your preference.
* For short stay type back shot mirrors.
Overall Length x Width W (mm) Body: 250 x 120 Material Stainless mirror surface
A special bracket for attaching the back shot mirror to the Fuso Large Super Great. In order to reduce the blurring of the mirror due to vibration, we made the material thicker and provided a press line to make it easier to use. All stainless steel material.
Exterior parts
* If a genuine visor is... Read More
Wall Thickness (mm) 5 Specification For hanging mirrors Manufacturer Fuso Included Accessories SUS bolt / nut, double-sided tape 2 each Material SUS304 Type Stay fixed type for hanging mirror Size t=5mm
Uses an anti-glare mirror that prevents driving visibility from being blocked by light reflections from following vehicles! The flat mirror makes it easier to see when backing up! It can be attached to genuine mirror stays of 20mmΦ to 32mmΦ.
* If the mounting bracket is mounted facing forward, it... Read More
Dimension (Φmm) 200 Mounting For 20-32 mmΦ pipe Material Stainless steel
The mounting band for the rearview mirror is now compatible with 2-step adjustment from 20MM to 32MM, making it compatible with vehicles with thick mirror stays. Two types are available: stainless steel plated type and black painted type.
Exterior parts
*If the mounting bracket is installed facin... Read More
Applicable Width (mm) Mirror stay: Φ20-32 Material SUS304
Suitable for genuine mirror stays of 19 to 27 mmΦ. Uses a flat lens that makes it easy to grasp the sense of distance. We will follow blind spots that cannot be captured with genuine mirrors alone. Short stay type
Dimension (mm) 154×220 Material Body/resin stay/steel Lens Shape Planar lens
JET INOUE BACK SHOT Rear View Mirror Ver.1SUses an anti-glare flat lens that makes it easy to get a sense of distance. Follow the blind spots that cannot be captured with a genuine mirror. The metal part is rust-resistant stainless steel! Exterior parts * This product is compatible with mirror stays of 20 to 32 mmΦ.Suitable for 20-32mmΦ mirror stay Dimension (mm) 216 x 154 (excluding stay part) Dimensions, Width W x Depth D x Height H (mm) 216×60×154
