Website Maintenance Announcement

How to Use
Toggle Nav
My Cart
Search
Advanced Search
All Category
All Category
Menu
Account

Pneumatic Tools

A pneumatic tool is a tool that has a system that uses a force to return compressed air to its original state. Since air is a familiar presence, it can be used in a wide range of applications and is used in tools for various purposes such as polishing, grinding, tightening and nailing. Air impact wrench that tightens bolts and nuts, air saws used for cutting iron and aluminum, and air grinders when grinding surfaces of objects are included in the category of pneumatic tools. An air compressor is required to compress the air.

Other Related Pages

  1. metal sheet with holes
  2. staples sizes
  3. staple wire remover
  4. rivet 3 16 x 1 2
  5. sandblasting equipment singapore
  6. chisel images
  7. scaling hammer pneumatic single
  8. max staples remover
  9. iwata compressor singapore
  10. angle grinder singapore
  11. staples 1 4
  12. max staples size
  13. staple remover singapore
  14. air compressors singapore
  15. jet chisel pneumatic model jex 24
  16. dremel 6mm chuck
  17. furniture stapler
  18. max staples 23 25
  19. staple free staple
  20. pneumatic jet chisel
View : Grid List
Filter

Items 1 - 40 of 4644

Page
Set Ascending Direction
  1. Air Double Action Sander Non-dust-absorbing type
    MonotaRO Air Double Action Sander Non-dust-absorbing type
    Lightweight and compact, you can work with one hand. Since sanding is performed by the double action of eccentricity + rotation, polishing work is possible with less uneven cutting. For polishing work * Do not use for anything other than its intended purpose.
    Type  Non-dust absorbing type, magic type  Rotational Speed (min -1 [rpm])  10000  Air Consumption (L/min)  340  Suitable Air Pressure (MPa)  0.62  Air Hose Connection  PT1/4  Orbit Diameter (Φmm)  5  Suitable Hose Diameter (Φmm)  6.5  Pad Size (Φmm)  125 
    Rating:
    83%
    (13)
    from S$179.90
    Min. 2 days
  2. Air Riveter
    MonotaRO Air Riveter
    Since it is air, it is possible to crimp rivets strongly and quickly crimp a large number of rivets. For rivet caulking * Do not use for any other purpose. * The hole diameter of the nosepiece nominal 6.4 size is approximately Φ4.1mm. Even if the rivet is nominally 6.4, only rivets with a mandrel... Read More
    Suitable Material  For iron, aluminum and stainless steel  Suitable Air Pressure (MPa)  0.62  Suitable Rivet Diameters (Φmm)  2.4、3.2、4.0、4.8、5.6、6.4  Air Hose Connection  PT1/4 
    Rating:
    79%
    (16)
    from S$319.90
    Min. 2 days
  3. FCH-20 Holder Spring
    FUJI INDUSTRIAL TECHNIQUE FCH-20 Holder Spring
    Rating:
    100%
    (3)
    from S$3.59
    Min. 2 days
  4. Air impact wrench high torque type twin hammer
    MonotaRO Air impact wrench high torque type twin hammer
    A high torque type twin hammer, ideal for changing tires on heavy trucks. * Do not use an air hose that is deteriorated or scratched as it may explode. When connecting the air hose, take your finger off the operating lever of the impact wrench. Before replacing the socket or air tool, remove the ... Read More
    Included Accessories  PT3 / 8 coupler, dustproof rubber cap  Type  Twin hammer  Maximum Torque (Nm)  2033/15 seconds  Rotation Speed at No Load (min-1[rpm])  5500  Air Consumption (L/min)  198  Suitable Air Pressure (MPa)  0.62  Air Hose Connection  PT3/8  Practical Torque Range (Nm)  918～1627  Suitable Hose Diameter (Φmm)  9.5  Applicable bolt size  M30 
    Rating:
    80%
    (10)
    from S$499.90
    Min. 2 days
  5. Air needle chiseler
    ESCO Air needle chiseler
    Operating Pressure (MPa)  0.64 
    Rating:
    95%
    (4)
    from S$349.90
    Min. 2 days
  6. Air Impact Wrench Medium Torque Type Twin Hammer with Rubber Grip
    MonotaRO Air Impact Wrench Medium Torque Type Twin Hammer with Rubber Grip
    A medium torque type twin hammer, ideal for changing tires on medium-duty trucks. The rotation speed can be adjusted with the trigger (operation button) part. * Do not use an air hose that is deteriorated or scratched as it may explode. When connecting the air hose, take your finger off the opera... Read More
    Included Accessories  PT1/4 coupler, dustproof rubber cap  Type  Twin hammer  Maximum Torque (Nm)  1288/15 seconds  Rotation Speed at No Load (min-1[rpm])  7000  Air Consumption (L/min)  150  Suitable Air Pressure (MPa)  0.62  Air Hose Connection  PT1/4  Practical Torque Range (Nm)  350～950  Suitable Hose Diameter (Φmm)  9.5 
    Rating:
    73%
    (6)
    from S$319.90
    Min. 2 days
  7. Air Nailer 10J Staple
    MAX Air Nailer 10J Staple
    Supports staples up to 25 mm. Uses a grip cover that prevents coldness. Robust metal body! Compact and lightweight 1.1kg! Remodeling, interior, furniture repair, DIY, etc.
    Number of Loading Staples  100 (1)  Working Air Pressure (MPa [kgf/cm2])  0.5～0.7(4.5～7)  Working air pressure (MPa [kgf / cm 2 ])  0.5～0.7(3.5～7) 
    Rating:
    95%
    (4)
    from S$199.90
    Min. 2 days
  8. Air impact wrench industrial twin hammer with resin clip
    MonotaRO Air impact wrench industrial twin hammer with resin clip
    It is a twin hammer. By keeping the practical torque low, it is suitable for long-term use sites such as industrial use. The resin grip makes it easy to grip. * Do not use an air hose that is deteriorated or scratched as it may explode. When connecting the air hose, take your finger off the opera... Read More
    Included Accessories  PT1/4 coupler, dustproof rubber cap  Type  Twin hammer  Maximum Torque (Nm)  746  Rotation Speed at No Load (min-1[rpm])  7000  Air Consumption (L/min)  124  Suitable Air Pressure (MPa)  0.62  Air Hose Connection  PT1/4  Practical Torque Range (Nm)  260～650  Suitable Hose Diameter (Φmm)  9.5 
    Rating:
    100%
    (1)
    from S$249.90
    Min. 2 days
  9. Mini mini ratchet wrench 2way low profile
    MASTER AIR Mini mini ratchet wrench 2way low profile
    It is a change of the head shape. The head height has been lowered, making it easier to access narrow spaces. Both 3 / 8sq (9.5mm) sockets & 1/4 inch (6.35mm) bits can be used.
    Included Accessories  Air plug 20PM type  Maximum Torque (Nm)  34  Rotation Speed at No Load (min-1[rpm])  420  Suitable Air Pressure (MPa)  0.62  Air Hose Inner Diameter (Φmm)  Recommended 4.8 or higher  Suitable Air Compressor (kw)  (3-phase 200V) Recommended 2.2 or more  Air inlet  1/4  Exhaust direction  Rear  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$199.90
    Min. 2 days
  10. Belt Sander for DIY
    AIRREX (Anest Iwata) Belt Sander for DIY
    "AIR REX" will be Anest Iwata's DIY brand 20mm width type. Belt width 20 mm. With a handle, you can work with both hands and reduce fatigue on your arms. Deburring and chamfering work in narrow places, corners, curved surfaces, etc.
    Rotation Speed at No Load (min-1[rpm])  16000  Air Consumption (L/min)  170  Maximum Operating Pressure (MPa)  0.6 
    from S$199.90
    Min. 2 days
  11. Air micro grinder
    UHT (Ushio) Air micro grinder
    An ultra-lightweight model with a reinforced resin body. For metal processing, polishing, and deburring.
    Mass (g)  78  Rotation Speed at No Load (min-1[rpm])  55000  Chuck Inner Diameter (Φmm)  3  Suitable Air Pressure (MPa)  0.4～0.6  Hose Connection  Quick joint  Exhaust direction  Rear 
    from S$299.90
    Min. 4 days
  12. Non-dust absorbing mini double action sander
    Compact Tool Non-dust absorbing mini double action sander
    Type  Hook-and-loop type  Rotational Speed (min -1 [rpm])  10000  Suitable Air Pressure (MPa)  0.4～0.6  Flow Rate (L/min)  340  Noise Level (dB(A))  82  Pad Size (Φmm)  45 
    from S$569.90
    Min. 2 days
  13. Normal pressure nailer
    MAX Normal pressure nailer
    Compact and lightweight metal body! Single hit (DS) / repeated hit switching trigger
    Working Air Pressure (MPa [kgf/cm2])  0.5～0.7(4.5～7)  Used hose  Inner diameter 6mm or more  Loading number  Staple nail / 100 (1 station) 
    from S$279.90
    Min. 2 days
  14. Baby Riveting Hammer (For BRH) Snap C <Sara>
    YOKOTA INDUSTRIAL Baby Riveting Hammer (For BRH) Snap C <Sara>
    YOKOTA INDUSTRY's riveting hammer BRH combined use, snap C type (flat tip type). For the snap receiver, use BRH combined snap buffer C.
    Mass (g)  285 
    from S$47.99
    Min. 2 days
  15. Normal pressure nailer
    MAX Normal pressure nailer
    Compatible with staples with a length of 10 to 22 mm.
    Working Air Pressure (MPa [kgf/cm2])  0.34～0.68(3.5～7)  Equipment  Guard (prevention of scratches)  Loading number  Staple nail / 100 (1 station) 
    from S$489.90
    Min. 2 days
  16. Concrete breaker
    TOKU PNEUMATIC Concrete breaker
    The TCB type is easy to use with strong striking force and little recoil, and we have a wide variety of models from small chipping to heavy work.
    Specification  Junk size / Φ26 × 80L  Number ofImpact (min -1 [times / min])  1400  Hose Inner Diameter (Φmm)  19(3/4)  Air Connection (inch)  1  Piston Diameter (Φmm)  35 
    from S$1,299.00
    Min. 2 days
  17. Ultra Light Impact Driver
    SP AIR Ultra Light Impact Driver
    Super lightweight with a reinforced resin body. Excellent operability with easy forward / reverse switching with one hand. You can fine-tune and control the speed with the trigger. A mini type that fits perfectly in your hand. For attaching and detaching small diameter bolts for general maintenan... Read More
    Rotation Speed at No Load (min-1[rpm])  17000  Suitable Air Pressure (MPa)  0.62  Maximum Tightening Torque (Nm)  48  Chuck  Bit sleeve type  Hose Connection  NPT1/4  Outlet  (Bit) 6.35mm  Exhaust direction  Rear 
    Rating:
    60%
    (1)
    from S$489.90
    Min. 3 days
  18. Air hammer set
    PAOCK Air hammer set
    Convenient for chipping concrete, peeling paint, and cutting thin iron plates.
    Maximum Operating Pressure (MPa)  0.58  Air Consumption (L/min)  112  Plug  (Mounting diameter) Rc1 / 4  Outlet  (Chisel) 10.2  Stroke numbers (min)  3000 
    from S$149.90
    Min. 4 days
  19. Impact wrench
    TECH Impact wrench
    Maximum Torque (Nm)  320 
    from S$389.90
    Min. 6 days
  20. Dust-absorbing orbital sander
    Compact Tool Dust-absorbing orbital sander
    By adopting special rubber for the support part, durability is improved and operability is also improved.
    Rotational Speed (min -1 [rpm])  8000  Noise Level (dB)  78(A)  Flow Rate (L/min)  350 
    from S$779.90
    Min. 3 days
  21. Light breaker (Air type)
    TOKU PNEUMATIC Light breaker (Air type)
    Hose Inner Diameter (Φmm)  19  Piston Diameter (Φmm)  36  Number of hits (bpm)  1800 
    from S$1,199.00
    Min. 4 days
  22. Short impact wrench
    Compact Tool Short impact wrench
    It is a twin hammer with a powerful torque of 500 Nm. Since the total length is a short type, it is easy to enter a narrow place. For attaching and detaching automobile wheel nuts
    Material  Aluminum alloy  Type  Twin hammer  Rotation Speed at No Load (min-1[rpm])  8500  Suitable Air Pressure (MPa)  0.4～0.6  Maximum Tightening Torque (Nm)  500  Hose Connection  Rc1/4  Exhaust direction  Below 
    from S$379.90
    Min. 5 days
  23. Side handle for U-83P
    U-TOOLS (SAITAMA SEIKI) Side handle for U-83P
    Suitable for  U-83P 
    from S$17.99
    Min. 10 days
  24. Staple Nail Gun
    MAX Staple Nail Gun
    Achieves excellent rapid fire performance that responds to professional quick hits. 25mm staples are also OK. Power that can afford to drive staples. best seller. Reliable orange body. Equipped with a stabilizer that is ideal for vertical striking. Dragging can be done smoothly while remaining ve... Read More
    Number of Loading Staples  100 (1)  Working Air Pressure (MPa [kgf/cm2])  0.39～0.68[4～7] 
    from S$599.90
    Min. 8 days
  25. 3/4 drive impact wrench
    BAHCO 3/4 drive impact wrench
    Achieves high durability with an integrally molded magnesium body. You can switch between forward and reverse with one hand. It is maintenance-free. For tightening and removing bolts in automobiles, construction machinery, industry, etc., to reduce the burden on workers due to ultra-lightweight
    Material  Magnesium alloy  Hose Diameter (Φmm)  (Minimum) 10  Speed  6200RPM・SPM/min  Air Consumption (NL/min)  181  Torque Range (Nm)  1560  Anvil  Long type  Type of Coupler  3/8”  Noise Level (dB (A)) (50/60Hz)  99.8 
    from S$2,499.00
    Min. 5 days
  26. Belt Sander
    FUJI INDUSTRIAL TECHNIQUE Belt Sander
    In a narrow space where grinders cannot work, it is effective for chamfering corners of all materials, chamfering, polishing, internal and external R chamfering, deburring, casting products, die casting, etc. Even if you move left and right while grinding, the grinding belt will not come off, so ... Read More
    Rotation Speed at No Load (min-1[rpm])  20000  Hose Inner Diameter (Φmm)  9.5  Air Intake  PT1/4 
    from S$1,299.00
    Min. 8 days
  27. Open end wrench straight
    URYU SEISAKU Open end wrench straight
    Used for tightening pipes and tube nuts. The compact design allows tightening even in narrow spaces. There are 11 series of standard stall type and T60 series that shuts off with a clutch when the set torque is reached. * The torque range is a guide for tightening. Select the tool correctly accor... Read More
    Hose Connection  Rc1/4  Noise Level (dB(A))  76  Vibration (m/s2)  (Acceleration, 3-axes) less than 2.5 
    from S$2,999.00
    Min. 6 days
  28. Bar grinder long 75Φ
    YoshidaTools Bar grinder long 75Φ
    YOSHIDA's straight grinders (YGL-4H series) are designed to be compact, lightweight, high power and easy to use. A compactly designed cylinder and rotor are built into the aluminum body. Since the grindstone shaft is directly connected to the rotor, it is powerful with little transmission los... Read More
    Screw Dimensions  (Whetstone mounting) W3 / 8 mountain 16  Handle  roll  No-load Rotation Speed (min -1 [rpm])  12000  Air Consumption (Nm3/min)  (Maximum) 0.75  Exhaust direction  side  RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$649.90
    Min. 10 days
  29. Hammer drill (pneumatic)
    TOKU PNEUMATIC Hammer drill (pneumatic)
    Anti-vibration type protects you from vibration damage. It has a wide working range and a drilling capacity of 13 to 28 mm. For drilling work for general civil engineering construction work and chemical anchor construction.
    Specification  Air inlet 3 / 8PT  Hose Inner Diameter (Φmm)  12.7  Direction of Rotation  Right  Piston Diameter (Φmm)  38×22  Number of hits (bpm)  3200 
    from S$2,499.00
    Min. 4 days
  30. Air Nipper body ML20 for Nile gate cut
    MUROMOTO TEKKO Air Nipper body ML20 for Nile gate cut
    from S$569.90
    Min. 6 days
  31. Belt sander
    SHINANO Belt sander
    With belt conversion one-touch mechanism. With a cooling exhaust port that extends the life of the belt paper. From deburring work of metal processing to finishing work. Bead polishing work for rust removal welding of automobile sheet metal.
    Suitable Air Pressure (MPa)  0.6  Hose Connection  Rc1/4  Exhaust direction  Rear 
    from S$649.90
    Min. 3 days
  32. Drill chuck for FRD-6PH-3 (8)
    FUJI INDUSTRIAL TECHNIQUE Drill chuck for FRD-6PH-3 (8)
    Suitable Model  FRD-6PH-3-8 
    from S$169.90
    Min. 8 days
  33. Impact wrench
    Ingersoll Rand Impact wrench
    The 2925 series is an air impact wrench recommended by Ingersoll Land, which has many of the latest technologies. By combining the latest 7-blade high-efficiency air motor with a twin hammer mechanism that produces high output, high output can be obtained instantaneously with a quick start-up. By... Read More
    Shape  Pistol type  Maximum Torque (Nm)  2169  Rotation Speed at No Load (min-1[rpm])  5200  Air Consumption (L/min)  1699  Air Connection (inch)  1/2  Practical Torque Range (Nm)  542～1898  RoHS directive (corresponding to 10 substances)  Correspondence  Recycled paper use mark  Conformity 
    from S$5,399.00
    Min. 5 days
  34. Nile timing unit TU01
    MUROMOTO TEKKO Nile timing unit TU01
    from S$299.90
    Min. 4 days
  35. Auto rivet feeder
    LOBSTER (LOBTEX) Auto rivet feeder
    An ultra-compact rivet feeder that can easily and automatically supply rivets. The rivet supply unit can be adjusted to 3 positions. Since it is a desktop size, it can be easily moved according to changes in the work site, greatly increasing the degree of freedom in the installation location. Bli... Read More
    Power Input (V)  AC100～240(50～60Hz)  Suitable Rivet Diameters (Φmm)  3.2  Necessary Air Pressure (MPa [kgf/cm2])  0.5～0.6 
    from S$8,999.00
    Min. 4 days
  36. Air Belt Sander
    MonotaRO Air Belt Sander
    Ideal for polishing in tight spaces. The belt can be replaced with one hand, greatly improving efficiency. In addition, the rear exhaust minimizes the scattering of shavings. Deburring, rust removal, polishing, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. Whe... Read More
    Rotation Speed at No Load (min-1[rpm])  18000  Air Hose Connection  PT1/4 
    Rating:
    86%
    (56)
    from S$139.90
    Min. 2 days
  37. Micro Air Grinder
    MonotaRO Micro Air Grinder
    Handy type micro grinder. It can be used for deburring after processing, grinding and surface finishing of various metals. For grinding and polishing of metals, etc. *Avoid using for anything other than its intended purpose. *Since it is designed to exhaust air from the rear during operation, air... Read More
    Included Accessories  1/4 coupler  Mass (g)  250  Rotation Speed at No Load (min-1[rpm])  56000  Air Consumption (L/min)  198  Suitable Air Pressure (MPa)  0.62  Air Hose Connection  1/4 
    Rating:
    80%
    (36)
    from S$109.90
    Min. 2 days
  38. Air Impact Wrench Lightweight Type
    MonotaRO Air Impact Wrench Lightweight Type
    It is compact and lightweight, very easy to handle, and has a twin hammer structure, so stable torque can be obtained. The tightening speed is fast and the workability is excellent. *Do not use an air hose that has deteriorated or is damaged, as it may explode. When connecting the air hose, keep ... Read More
    Included Accessories  PT1/4 coupler, dustproof rubber cap  Type  Twin hammer  Maximum Torque (Nm)  745  Rotation Speed at No Load (min-1[rpm])  11000  Air Consumption (L/min)  130(4.6cfm)  Suitable Air Pressure (MPa)  0.62  Air Hose Connection  1/4  Practical Torque Range (Nm)  68～610 
    Rating:
    88%
    (184)
    from S$199.90
    Min. 2 days
  39. Air Impact Wrench Socket Set
    MonotaRO Air Impact Wrench Socket Set
    The socket and body are set in a resin case, making it convenient to carry. For tightening and removing bolts and nuts For disassembling and assembling small machines. * If you feel that the torque is weak, adjust it with the torque adjustment button near the air connection. 4 is the maximum torq... Read More
    Specification  Single hammer  Maximum Torque (Nm)  350  Rotation Speed at No Load (min-1[rpm])  7000  Air Consumption (L/min)  127.00  Suitable Air Pressure (MPa)  0.621  Air Hose Connection  PT1/4 
    Rating:
    75%
    (97)
    from S$99.90
    Min. 2 days
  40. Needle General Purpose
    MonotaRO Needle General Purpose
    Due to the use of special steel, it is tough and has a long life. A highly versatile needle that can be used by various manufacturers. Needle for pneumatic and electric chisel. * Needle for pneumatic / electric chisel. Never use it for any other purpose.
    Rating:
    91%
    (13)
    from S$67.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 4644

Page
Set Ascending Direction