Grinding
Grinding is a tool that smoothly grinds the surface of objects such as metal and glass by rotating a circular grindstone. A grinder as a pneumatic tool uses compressed air for the rotational movement of a grindstone. There are various types depending on the application, such as those that can remove paint and rust, small ones such as pencil types suitable for precision polishing, engraving, and finishing work, and those that can use abrasives other than grinding stones. There is a grinder.
Other Related Pages
- UHT (Ushio) Air micro grinderAn ultra-lightweight model with a reinforced resin body. For metal processing, polishing, and deburring.Mass (g) 78 Rotation Speed at No Load (min-1[rpm]) 55000 Chuck Inner Diameter (Φmm) 3 Suitable Air Pressure (MPa) 0.4~0.6 Hose Connection Quick joint Exhaust direction Rearfrom S$299.90Min. 4 days
- YoshidaTools Bar grinder long 75ΦYOSHIDA's straight grinders (YGL-4H series) are designed to be compact, lightweight, high power and easy to use. A compactly designed cylinder and rotor are built into the aluminum body. Since the grindstone shaft is directly connected to the rotor, it is powerful with little transmission los... Read MoreScrew Dimensions (Whetstone mounting) W3 / 8 mountain 16 Handle roll No-load Rotation Speed (min -1 [rpm]) 12000 Air Consumption (Nm3/min) (Maximum) 0.75 Exhaust direction side RoHS directive (corresponding to 10 substances) Correspondencefrom S$649.90Min. 10 days
- MonotaRO Micro Air GrinderHandy type micro grinder. It can be used for deburring after processing, grinding and surface finishing of various metals. For grinding and polishing of metals, etc. *Avoid using for anything other than its intended purpose. *Since it is designed to exhaust air from the rear during operation, air... Read MoreIncluded Accessories 1/4 coupler Mass (g) 250 Rotation Speed at No Load (min-1[rpm]) 56000 Air Consumption (L/min) 198 Suitable Air Pressure (MPa) 0.62 Air Hose Connection 1/4
- MonotaRO Air grinder for whetstone with shaftIt is a small type grinder. The collet chuck allows you to attach a whetstone with a shaft of various shapes with a 6 mm shank. Finish grinding of small parts, etc. * Do not use for any other purpose.Type Non-dust absorbing type Rotational Speed (min -1 [rpm]) 22000 Air Consumption (L/min) 84 Suitable Air Pressure (MPa) 0.62 Air Hose Connection PT1/4 Air Hose Inner Diameter (Φmm) 9.5
- MonotaRO Air Grinder Set for Mounted WheelIt is a small type grinder. The collet chuck allows you to attach a whetstone with a shaft of various shapes with a 6 mm shank. Finish grinding of small parts, etc. * Do not use for any other purpose.Rotational Speed (min -1 [rpm]) 22000 Air Consumption (L/min) 84 Suitable Air Pressure (MPa) 0.62 Air Hose Connection PT1/4 Suitable Hose Diameter (Φmm) 6.5
- AIRREX (Anest Iwata) Air Grinder"AIRREX" will be Anest Iwata's DIY brand. Compact and lightweight * Hexagonal shaft is not supported.Rotation Speed at No Load (min-1[rpm]) 25000 Air Consumption (L/min) 230 Maximum Operating Pressure (MPa) 0.59
- MonotaRO Air Grinder for Heavy DutyA straight grinder for heavy grinding. Since the air supply is a roll type, it is suitable for long hours of work. * Do not use for anything other than its intended purpose.Rotational Speed (min -1 [rpm]) 24000 Air Consumption (L/min) 108 Suitable Air Pressure (MPa) 0.62 Air Hose Connection PT1/4 Suitable Hose Diameter (Φmm) 6.5
- MonotaRO Air micro angle grinder for surface grindingCan be used for surface grinding. Since there is little vibration, it is suitable for long hours of work. As the set contents are substantial, it is convenient to carry. For surface grinding * Please avoid using it for any other purpose.Mass (g) 150 Rotation Speed at No Load (min-1[rpm]) 23500 Air Consumption (L/min) 120 Hose Inner Diameter (Φmm) 5 Suitable Air Pressure (MPa) 0.4~0.6 Spindle M7-P0.75 Connection diameter Air: 6Φmm
- TRUSCO Micro Air GrinderAn easy-to-grip ergonomically designed micro air grinder. A high-grade precision air tool with excellent durability. Compatible with 2.4 and 3.2 mm axes by using an optional collet. Deburring, chamfering, and polishing when processing various parts. Mold processing and glass processing. For light... Read MoreMass (g) 108 Rotation Speed at No Load (min-1[rpm]) 60000 Chuck Inner Diameter (Φmm) 3 Suitable Air Pressure (MPa) 0.4~0.6
- MonotaRO For air angle grinder + mini mini + lever type + 50ΦA general 50mm whetstone can be used. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. Before connecting the air hose, make sure that air is not supplied by the operating ... Read MoreRotation Speed at No Load (min-1[rpm]) 16500 Air Consumption (L/min) 260 Suitable Air Pressure (MPa) 0.55 Air Hose Connection PT1/4 Wheel Outer Diameter (Φmm) 50 (hole diameter Φ9.53) Suitable Hose Diameter (Φmm) 5
- MonotaRO Air Angle Grinder with ShaftIt is a small type angle grinder. The collet chuck allows you to attach a whetstone with a shaft of various shapes with a 6 mm shank. Finish grinding of small parts, etc. * Do not use for any other purpose.Rotational Speed (min -1 [rpm]) 20000 Air Consumption (L/min) 85 Suitable Air Pressure (MPa) 0.62 Air Hose Connection PT1/4 Suitable Hose Diameter (Φmm) 6.5
- MonotaRO Air micro straight grinder for precision grindingIt can be used for deburring after processing, grinding of various metals, and surface finishing. Since there is little vibration, it is suitable for long hours of work. As the set contents are substantial, it is convenient to carry. For precision grinding * Please avoid using it for any other pu... Read MoreMass (g) 130 Rotation Speed at No Load (min-1[rpm]) 65000 Air Consumption (L/min) 120 Hose Inner Diameter (Φmm) 5 Suitable Air Pressure (MPa) 0.4~0.6 Point Angle Straight Connection diameter Air: 6Φmm
- VESSEL Air Angle GrinderA safety throttle that prevents unexpected operation. <Click lock disk system> The dedicated adapter makes it easy to replace the grindstone without using a tightening tool. It is a specification that does not exhaust the work and does not raise dust. For metal grinding / polishing, base fi... Read MoreRotation Speed at No Load (min-1[rpm]) 13500 Suitable Air Pressure (MPa) 0.6 Hose Connection Rc1/4 Exhaust direction Side
- MonotaRO Air micro grinder setIt can be used for deburring after processing, grinding of various metals, and surface finishing. For grinding and polishing of metals, etc. * Do not use for any other purpose.Mass (g) 250 Rotation Speed at No Load (min-1[rpm]) 56000 Air Consumption (L/min) 198 Suitable Air Pressure (MPa) 0.62 Air Hose Connection 1/4
- CUSTOR Mini angle grinderMini grinder with high precision finish, quiet and high speed grindingSpecification Safety lever type Mass (g) 540 Rotation Speed at No Load (min-1[rpm]) 22000 Suitable Air Pressure (MPa) 0.6 Air InLet NPT1/4 Exhaust Type Rear exhaust type Collet diameter (Φmm) 6.0(1/4)
- JTC Air Grinder "Air Leutor"Specification Air inlet: Rc1/4 Rotational Speed (min -1 [rpm]) 22000 RoHS directive (corresponding to 10 substances) Correspondencefrom S$199.90Min. 2 days
- SUPER TOOL Micro Air GrinderUltra-compact / lightweight pencil type that fits your fingertips. Excellent safety and durability due to the precision-designed vane motor. Achieves high-speed precision machining with high-speed rotation and high output. Evolved in quality and performance, without misalignment, and demonstrates... Read MoreSupply Air Pressure (MPa) 0.6 Hose Connection (Air Supply Side) Nipple R1 / 4 Exhaust Type Rear
- MonotaRO Air grinder + mini miniIt is a mini mini air grinder with a total length of 123 mm. Finish grinding of small parts, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. When connecting the air hose, take your finger off the operating lever of the air grinder. Before replacing the tip tool,... Read MoreIncluded Accessories PT1/4 coupler, dustproof rubber cap Rotation Speed at No Load (min-1[rpm]) 25000 Air Consumption (L/min) 260 Suitable Air Pressure (MPa) 0.55 Air Hose Connection PT1/4 Suitable Hose Diameter (Φmm) 5
- MASTER AIR Mini Mini Angle Grinder 2in Low ProfileIt is a change of the head shape. The head height has been lowered, making it easier to access narrow spaces.Rotation Speed at No Load (min-1[rpm]) 16500 Wheel Diameter (Φmm) 58 Suitable Air Pressure (MPa) 0.62 Air Hose Inner Diameter (Φmm) Recommended 4.8 or higher Suitable Air Compressor (kw) (3-phase 200V) Recommended 2.2 or more Air inlet 1/4 Exhaust direction Rear RoHS directive (corresponding to 10 substances) Correspondence
- CUSTOR Mini GrinderMini grinder with high precision finish, quiet and high speed grindingSpecification Safety lever type Mass (g) 360 Rotation Speed at No Load (min-1[rpm]) 25000 Suitable Air Pressure (MPa) 0.6 Air InLet NPT1/4 Exhaust Type Rear exhaust type Collet diameter (Φmm) 6.0(1/4)
- YANASE Die grinder 2A straight grinder equipped with the latest lock system. Can be used for Φ6mm shaft tip tools.Included Accessories Spanner, coupler, regulator Mass (g) 500 Rotational Speed (min -1 [rpm]) 25000 Operating Pressure (MPa) 0.44~0.58 Outer Diameter (Φmm) 43 Exhaust direction Rear Collet diameter (Φmm) 6 RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Air Grinder for Heavy Grinding, Long Shaft TypeA straight grinder for heavy grinding. Since the air supply is a roll type, it is suitable for long hours of work. * Do not use for anything other than its intended purpose.Rotational Speed (min -1 [rpm]) 14600 Air Consumption (L/min) 142 Suitable Air Pressure (MPa) 0.62 Air Hose Connection PT3/8 Suitable Hose Diameter (Φmm) 9.5
- Muraki Micro Air Grinder (GEM New Motor)An ultra-lightweight 100g ergonomic grip improves work efficiency. By adopting a special air hose, 10 horn sounds are reduced compared to the conventional product. The precision-designed vane motor maintains stable performance for a long time. The ideal design of the bearing, high-grade bearings,... Read MoreMass (g) 100 Maximum Rotation Speed (min-1[rpm]) 60000 Throttle Control ON⇔OFF valve Supply Air Pressure (MPa) 0.5(+0.2/-0.1) Air Consumption (L/min ANR) 160
- YoshidaTools Baby Grinder (6mm Axis for Precision Polishing & Grinding)YOSHIDA's baby grinder (YG-23 series) is a high quality product made in Japan, designed to be compact, lightweight, high power and easy to use. Since the collet is directly connected to the rotor of this machine, there is little core deviation and it rotates smoothly at high speed, reducing o... Read MoreIncluded Accessories Coupler plug NL-22PM Screw Dimensions (Hose base) RC1 / 4 No-load Rotation Speed (min -1 [rpm]) 22000 Air Consumption (Nm3/min) (No load) 0.47 RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Air micro angle grinder For precision grindingIt can be used for deburring after processing, grinding of various metals, and surface finishing. Since there is little vibration, it is suitable for long hours of work. As the set contents are substantial, it is convenient to carry. Since the tip is angled, please use it in a place where it is d... Read MoreMass (g) 140 Tip Angle (°) 120 Rotation Speed at No Load (min-1[rpm]) 52500 Air Consumption (L/min) 120 Hose Inner Diameter (Φmm) 5 Suitable Air Pressure (MPa) 0.4~0.6 Connection diameter Air: 6Φmm
- YoshidaTools Die Angled Grinder "Baby Angled Grinder" (50mm)YOSHIDA's baby angle grinder (YA-2C series) is a high quality product made in Japan, designed to be compact, lightweight, high power and easy to use. lightweight. It is a compact and easy-to-hold design. It is a product with good gear durability and long lifetime. Welding surface finishing, g... Read MoreIncluded Accessories Coupler plug NL-22PM Method (Handle) roll Screw Dimensions (Hose base) RC1 / 4 No-load Rotation Speed (min -1 [rpm]) 15000 Air Consumption (Nm3/min) (No load) 0.47 RoHS directive (corresponding to 10 substances) Correspondence
- LITETEC Small and light air grinderLightweight, compact and easy to handle. It is possible to grind and polish according to the application by attaching the tip parts of the Lolock mounting method. For various grinding and polishing work by attaching various tip parts of the Lolock mounting method.Mass (g) 580 Rotation Speed at No Load (min-1[rpm]) 0~16000 Mounting Screw M6UNF (pad) Working Air Pressure (MPa [kgf/cm2]) 6 Speed Range Stepless Pad diameter (Φmm) 50、75 Mounting method Lock type (tip parts) connector size 1/4from S$119.90Min. 2 days
- URYU SEISAKU GrinderRotation Speed at No Load (min-1[rpm]) 25000 (maximum) Hose Connection PT1/4 Noise Level (dB(A)) 85
- MASTER AIR MINI MINI Angled Grinder Exclusive GrindstoneSuitable for 2013 Abrasive Grain Size 36 Hole Diameter (Φmm) 9.5 Wheel Diameter (Φmm) 58 RoHS directive (corresponding to 10 substances) Correspondence
- MonotaRO Air Angle Grinder For Offset Wheel / Flexible WheelA general 100mm whetstone can be used. With a side grip that is easy to grip. It can be used for a wide range of work by changing the abrasive material. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use for any other purpose.Included Accessories 1 whetstone, 1 air coupler Hole Diameter (Φmm) 15 Rotation Speed at No Load (min-1[rpm]) 11000 Exhaust direction Forwardfrom S$279.90Min. 2 days
- MonotaRO Cut-off tool mini mini for 75ΦAs it is a mini type, it is suitable for work in narrow places. For polishing and polishing work in a narrow space * Do not use for anything other than its intended purpose.Specification (Air exhaust) Rear Mass (g) 400 Rotation Speed at No Load (min-1[rpm]) 16500 Suitable Air Pressure (MPa) 0.55 Air Hose Connection PT1/4 Suitable Hose Diameter (Φmm) 5from S$159.90Min. 2 days
- UHT (Ushio) Micro Angle GrinderErgonomic angles 120 and 90 degrees are available. Angle type reduces unpleasant noise that tends to occur. Abundant tip tools support various applications.Switching Method Control grip valve Supply Air Pressure (MPa) 0.6 Air Consumption (NL/min) 120 Exhaust Type Rear Shank - Hose Fitting Size PT 1/4
- YANASE Throttle type lightweight small air grinderLight weight but high torque! Ideal for spot polishing and deburring! Throttle type allows reliable setting of operation start/stop to prevent malfunction. Lightweight type with excellent workability. By attaching a tip tool, it is possible to cut and polish metal and woodwork. * After use, apply... Read MoreExhaust direction Side
- FUJI INDUSTRIAL TECHNIQUE Baby GrinderHigh output, excellent durability, easy to work. A high-output and durable baby grinder suitable for detailed work. Output is 30% higher than conventional products. Easy to replace the whetstone, Uses a highly durable collet, making it ideal for grinding in various metal processes.Rotation Speed at No Load (min-1[rpm]) 24000
- YOKOTA INDUSTRIAL Disc GrinderBuilt-in safety throttle deviceSpecification Exhaust direction: side Air Pressure (MPa) 0.6from S$469.90Min. 2 days
- MonotaRO For air angle grinder + offset grindstone/flexible grindstone + roll type + 100ΦA general 100mm whetstone can be used. Since the air supply is a roll type, it is suitable for long hours of work. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. Before ... Read MoreRotation Speed at No Load (min-1[rpm]) 15000 Air Consumption (L/min) 95 Suitable Air Pressure (MPa) 0.62 Air Hose Connection PT1/4 Wheel Outer Diameter (Φmm) 100 Suitable Hose Diameter (Φmm) 9.5
- MASTER AIR Mini 3" Angle Air Cut-Off Tool Low ProfileThe head height has been lowered, making it easier to access narrow spaces.Rotation Speed at No Load (min-1[rpm]) 16500 compressor 3-phase 200V 2.2kW or more Exhaust direction Rear RoHS directive (corresponding to 10 substances) Correspondence Suitable Air Pressure (kPa) 620(0.62Mpa)
- UHT (Ushio) Micro Hand ToolA 17mm, dodecagonal body that fits perfectly in your hand. Precise and quick finish. It is powerful without feeling vibration or heat generation. You won't get tired even if you work for a long time. For precision grinding and polishing workType Straight type Maximum Rotation Speed (min-1[rpm]) 65000 Switching Method Control grip valve Mass of Main Unit (g) 130 Suitable Air Pressure (MPa) 0.4 Air Consumption (NL/min) 120 Exhaust Type Rear Shank 3mm Hose Fitting Size PT 1/4
- MASTER AIR Mini Mini Angle Die Grinder Low ProfileIt is a change of the head shape. The head height has been lowered, making it easier to access narrow spaces. It is used by attaching a whetstone with a shaft or a polishing tool with a shaft such as a carbide bar. A small palm-sized air tool. Even women can use it easily.Rotation Speed at No Load (min-1[rpm]) 19000 Suitable Air Pressure (MPa) 0.62 Air Hose Inner Diameter (Φmm) Recommended 4.8 or higher Exhaust Type Rear exhaust Suitable Air Compressor (kw) (3-phase 200V) Recommended 2.2 or more Suitable Collet 6mm、3mm、1/4、1/8 Air inlet 1/4 RoHS directive (corresponding to 10 substances) Correspondencefrom S$169.90Min. 2 days
- MonotaRO Air angle grinder + offset whetstone/flexible whetstone + roll type + 50ΦA general 50mm whetstone can be used. Since the air supply is a roll type, it is suitable for long hours of work. Light polishing work such as surface grinding, surface finishing, chamfering, rust removal, etc. * Do not use an air hose that is deteriorated or scratched as it may explode. Before c... Read MoreRotation Speed at No Load (min-1[rpm]) 15000 Air Consumption (L/min) 79 Suitable Air Pressure (MPa) 0.62 Air Hose Connection PT1/4 Wheel Outer Diameter (Φmm) 50 Suitable Hose Diameter (Φmm) 9.5from S$289.90Min. 2 days