The reviews are automatic translation.
Parts processing on lathe
On 2020-02-12 19:28:15
We use without problem
I am very satisfied with the cost performance
On 2019-05-23 21:28:20
Have you worn out the sleeves you've been using for years? Since the drill is idle, I made a new setup, and of course we can use it very comfortably.
Private drilling work. With a medium drilling machine.
On 2018-03-16 10:15:16
It has high precision and no core shake, so it can be used well in the production site.
On 2018-02-20 11:09:07
The drilling machine is MT 2 14 mm, the cone of 14.5 mm is MT 1, so purchase to keep it constantly on each.
If you are at this price you can feel free to order.
I am using it for the sleeve of long reamer
On 2018-01-25 15:08:37
I am using it for reamer's sleeve but because it is a small lathe it is a sleeve of a shout, so I'm cutting it and I want a sleeve for show
Universal lathe center push
On 2017-08-19 14:56:47
The purchase of the first one is completely OK
It was a repeat arrangement this time,
There are many scratches and small dents on the surface
If you confirm the appearance before shipping it will definitely
I was sorry at the level that I could discover.
Hurrying work can not be completed in time if you are returning it
Because it was not a convex, and there was no problem
I am using without returning.
I was sorry just because the first one was in good condition.
When attaching the drill chuck to the lathe spindle
On 2017-07-20 18:10:18
If you work with the end mill on the lathe chuck, the eccentricity will affect and it will not be able to be cleaned smoothly so expect to install the drill chuck mounted on the core pushing table side without swinging, so that the Morse taper of the spindle and the tailstock Buy this sleeve to absorb the difference. Although the drill chuck could be installed as desired, the accuracy of the drill chuck was not as high as expected, and the eccentricity of the drill and end mill was almost the same as that of the three claw chuck. Well let's say that it can be used for things that are difficult to grip with three claws such as a small diameter drill. Since the eccentricity of the sleeve itself can not be detected with the dial gauge, it has sufficient accuracy.
On 2017-05-16 09:10:13
It is cheap and can be purchased and used without problems. It is comparable to a famous manufacturer. It is a good product.
I use it with radial drilling machine.
On 2017-01-27 08:14:17
It is enough to use for dust and it can be used without the drawbacks like this.
For attaching a tapered drill, use MT3 → MT2 sleeve.
On 2016-06-08 09:39:02
No problem at all.