The reviews are automatic translation.
On 2018-10-26 16:51:16
Because it is a socket of Tone, it is safe. There is no problem.
Oil change etc.
On 2017-07-30 17:59:09
When removing oil drain bolt, since it is hard to apply torque at insertion angle 9.5 mm, purchase for TONE ratchet handle 371 with insertion angle of 12.7 mm. I just tried to set, but I feel that the manufacturers are exactly the same.
Decomposition of engine
On 2017-07-10 10:38:20
It is a product of Tonné, so there is nothing wrong. You can put your strength on peace of mind.
At the time of replacing the new March Differential LSD
On 2016-10-04 08:07:01
I purchased 15-16-18. Other.
On 2016-09-29 20:47:41
I replaced it as a socket of Tone to replace all six hexes this time. I am using strength etc. without problems
On 2016-05-03 14:44:22
It was saved.
Light motor vehicle brake, Shu use during replacement,
On 2016-03-31 09:58:13
It was able to use firmly without problems.
Used for parts replacement
On 2015-06-21 00:24:25
It is a good product without licking even when wrench is turning
Triumph Street Triple R (2014) chain adjustment
On 2015-02-15 19:16:29
I purchased it because I need a 27 mm socket to adjust the tension of the street triple chain. Basically it's all in TONE's tool, so there were cheap ones, but choosing without hesitation. It is a safe brand.
On 2015-01-12 23:04:56
I bought it to remove the fixing bolt fixing the bicycle crank. Since the bolt is in the crankshaft hole, it is necessary for the socket to have an outer diameter that can be inserted into the shaft hole. Since detailed dimensions are described in the description, it is safe to check the outside diameter. Of course the fixing bolt could be removed without problems! There is also a socket with no description of dimensions, so to avoid failures such as being thicker than the shaft hole after purchase, it is helpful to mention the detailed sizes on other sockets too. Monotaro please.