The reviews are automatic translation.
M12 dish grill
On 2018-11-28 17:48:27
It finishes cleanly. It is just right to sink in thickness.
On 2018-02-14 07:36:42
Not at all. The surface will be rattled and will not be used.
On 2017-12-14 07:43:17
The chamfering of the hole of Φ 3 to Φ 4 is somewhat bad.
If it is more than that, there is no problem
Deburring of the hole
On 2017-11-15 17:51:26
It is small but excellent.
The price is somewhat higher but there is a sense of rigidity.
It is a pretty durable impression.
Deburring after burr removal holes in copper pipe
On 2017-05-24 14:54:16
The deburring was able to be taken quite well. A step is created at the place where you rubbed by the condition of power.
On 2016-08-22 18:24:52
Since it is coated, it can be well chamfered
On 2015-02-02 09:28:04
You can chamfer cleanly.
0.5 C chamfering with hole diameter φ 10
On 2014-11-28 16:31:57
At SUS304, 0.5C chamfering of φ10 is used in the drilling machine Although it is due to the use of a new product, no smoothing noodles without chattering without occurrence of beveling without occurrence of chamfering, after that, since it is a problem of durability, continued use I will.
Chamfering stainless steel flat head screws
On 2014-09-12 08:38:09
I tried to chamfer the 8 inches flat screw bolt, but it will be useless if it is used 3 to 4 times. I do work with irregular type drill to adjust the rotation speed variously but it is useless. If there are other good products, please introduce.
Chamfer after machining drilling
On 2011-07-07 17:19:50
Absolutely not! Although I used the same type of Okazaki until now, the price was also cheap and the shape was similar, so I tried this out this time but the chamfer was not bad at the first time and it did not become useless at all. I think it is the cause that there is almost no jiggling. It is better not to use this, I have learned. . .