The reviews are automatic translation.
On 2018-10-05 23:21:16
It is a good thing that metal dirt is very well taken. It is saved a little if it has a little more durability because it is a little decreasing.
Brush the edges of the metal plate after cutting with a free curve.
On 2018-08-01 08:35:28
I think that the quality of the rubber grinding wheel is not bad, but it is regrettable that it was attached slightly to the axis when used.
Grinding work of brass metal parts
On 2018-05-23 17:54:26
I use it by wearing it to the dresser's ruther. It is delightful as it is cheaply arranged from coarse to fine ones.
When polishing welding traces of steel, stainless steel, etc.
On 2018-03-20 15:14:22
Due to outstanding cost performance, I purchased quite a number of themselves and used it, but from the latter part of the purchase it surely increased the variation of quality,
Depending on the location, the polishing power of the metal decreases markedly, and the phenomenon that the metal itself burns as it is pressing the rubber has occurred.
However, considering cost performance, I think that it will be so.
On 2018-03-14 20:17:35
I can polish the mold beautifully and it is useful. Cost performance is also reasonable.
For polishing of tool iron parts
On 2018-02-20 16:53:02
Although it is inferior compared to other manufacturer's items than the thought, after use it will be the same as cheap and thankful product.
Polishing of ports and valves
On 2017-08-24 23:12:29
It is usable without permission. Since it is a consumable item, I am satisfied with COSPA.
Fine rust removal
On 2017-08-09 07:51:27
It is convenient when you want to polish, but you want to keep the surface in place. We also purchase high cost performance.
Port polishing, parts processing
On 2017-08-06 11:25:23
Although the core shake is few, it was used for aluminum port machining, but even a slight difference in level or the like can easily be torn off and it can not be used.
A typical, cheap and bad one.
I used it to polish aluminum details
On 2017-07-14 19:37:50
I polished a place with fine steps and bumps of aluminum parts.
It is good to polish, but as expected I was wearing quickly and the core appeared halfway through the work.
It seems not to have durability.