It is used for tightening / removing T15 size Torx screw by hand. Torx fitting is good, when you screw in, the ball side (tip) is easy to use, and hexagonal shape to rotate the screw makes it easy to turn without rubbing even with thin rubber gloves with oil and water I am satisfied, I think that it is easy to use because it is a length that can be reliably tightened at the end because it can be done.
This time, I bought a T8 stick wrench, I felt Loose fit of Torx looser (more play) than other sizes, although there may be somewhere in Torx shape on the screw side, but beeha ( Noga) 's T8 stick wrench, I thought that the Torx shape of the ball star L wrench is narrow because it was good without play. There is no problem because it can be tightened, but I was a little worried.
Used for automatic lathe tip exchange and drill tip replacement.
On 2012-04-21 22:22:50
I think that it is effective for replacing chips in narrow spaces between bytes, you can secure tightening torque, there is no looseness of the chips, and the screws are not damaged, the ball side is easy to use. At the time of tightening, there is no deformation / damage of the Torx part shape, and the fit is stable. I bought another size in addition. I hope to have set sales.