The reviews are automatic translation.
For air filter of cultivator
On 2019-05-04 16:29:47
Just long enough to wind around the air element of a Yanmar mini-tiller and use it as a filter. I cut it to 4 cm wide, and when I rolled it around the element, I cut it to a few centimeters, so I cut that part and made it a snap.
Old bike maintenance
On 2019-03-25 16:13:48
As there was no such product in the home center in the neighborhood, it was very helpful. I was a little worried because it was not genuine, but there was no problem at all. In addition, we will place an order at the next opportunity.
Motorcycle Air Filter
On 2019-01-06 23:45:45
Because it is cheap and there are also some sizes, you can cut and use 2 to 3 cars. I am satisfied although it is said that there is a little more thickness.
Used as an air filter of a brush cutter
On 2018-06-28 12:32:05
Several brush cutters are used depending on the application, but if I neglected to maintain the air filter, it was gone.
It probably was absorbed by oil and it was sucked in.
To be able to use it in any timely manner, it is a correct answer as a general-purpose item to be cut.
Cab adjustment is necessary as intake resistance increases.
Maintenance of the motorcycle
On 2018-04-30 19:46:50
I used it to reproduce the old car's waste version air cleaner. Especially good without problems.
I used it for maintenance for an oil pan type air cleaner of an old tillage machine.
On 2017-10-26 23:07:33
I am using the oil pan type air cleaner with 20 years old tiller. Although you can still use other company's products for plastic pan of oil pan, you can hardly see the inside sponge part. It used to be used in a state without this, but considerable dust accumulates when cultivating. As this sponge has a thickness of 19 mm, I made it by myself using this sponge part of the donut shape of the part which passes after sponge on the suction side and oil washing just fine. I could easily cut it with scissors and it was saved because I could exchange as much as 5 times as large as this.
Element repair of bike, agricultural machinery etc.
On 2017-04-10 12:09:42
The thing of this maker has moderate hardness, it is easy to handle, it is also easy to cut with a cutter. (Cutting uses a brand-new cutter each time cutting, and cutting it carefully little by little with a circle cutter in circle it cuts cleanly)
Compressor with the old model was selected as substitute because there is no parts supply.
On 2016-08-19 20:04:34
There is no problem in use. It was satisfactory if the price was this size.
On 2016-08-06 15:08:36
Compared with NTB made by other companies, sponges are rough so it is thought that there is little intake loss.
Repair of ITG air cleaner
On 2016-04-19 12:07:33
ITG air cleaner, if the sponge part deteriorates, it will be exchanged for every frame, it will cost you a few thousand yen, but if you change it by yourself with this filter, it costs only a few hundred yen. I tried it at the first 15 mm, but after that it was replaced to 20 mm closer to the genuine thickness. As it was thick, I could not cut the curve well and it looked like it was now, but I could satisfactorily repair if I even tolerated that point.