The reviews are automatic translation.
On the axis of the manufactured shift pedal
On 2018-10-01 14:41:27
In pedal production of the motorcycle, I want to support the shaft as bearing support, so it is satisfactory because the load against load is enough, it is pressed in and used, but the system is enough.
Maintenance of 3D printers
On 2018-09-25 08:50:17
Since the bearings made in China which had originally attached began rolling with less than half a year
I replaced it with a product from a domestic manufacturer.
I felt the difference in accuracy from the time of assembly.
There will not be anything to say about feeling of use and durability.
On 2014-06-19 17:43:37
It was difficult to obtain, but it arrived without a delivery date.
For guide use for 2 pieces
On 2014-06-12 16:17:37
Since it is a maker item, there is no problem with use.
Tractor working machine ground level carrier
On 2013-11-03 19:57:08
I had to extend the hand to the back until I knocked the leveling carrier backward while working outside, but remodeled with the old Wiper motor of the car. When the bearing pushes up 6 mm of flat iron when the bearing goes to the top dead center At the beginning when the bearing disengages the flat iron At the beginning, the flat seat larger than the bearing is inserted into the bearing of about 10 mm width at the beginning I thought that I thought but if you saw advertisement of your company on the net I just decided on this just because an affordable flange type bearing was found. With this you can work without opening the window behind the tractor cabin The remodeling result is very FB. If something comes out, I am sorry for being few, but please.
Remove the ground level carrier of the tractor
On 2013-11-03 19:12:21
To push up 6 mm of flat iron and remove the stopper 6 mm of flat iron does not fall with a bearing with a width of about 10 mm
On 2011-08-14 19:50:38
It is smooth. It is an ordinary bearing.