The reviews are automatic translation.
Many get on and off, shopping etc.
On 2018-12-03 19:51:33
Attached to JOG POCHE (YV 50H). ♪ relieved with manual attachment ♪ With the picture of the manual Finger square dotted line at the position of the inner fender, there is a notch of "", so cut it into a square as you push it with a well-cut cutter, and complete with the attached nut. Easy after removing the side cover.
Silver Pika has a good anti-corrosive effect with the plating firmly on, but it is difficult to stand out conspicuously? But, after pushing when you are in a hurry, you can notice the forgetting that if you flinch in the field of view even if you put on the engine in the cell, is it OK? After all, side stands can be used according to the situation so convenient ♪ If it is so good, I think that I should have worn it earlier.
The worried bank angle never makes a hit if it bends leaning out. I am satisfied that I could do a good shopping.
When you ride a motorcycle
On 2018-11-12 23:01:19
The size of the stand itself is good, but there is a place where the bottom slides a little. I want you not to slip
For scooter's side stand
On 2018-11-08 18:02:29
Truly Nishimoto's side stand. I put this side stand and it became very convenient. It was cheaper than the others.
Bike's side stand
On 2018-11-07 14:32:05
I was able to fit perfectly Satisfied I understood the instructions well
Installed in Yamaha Bino
On 2018-11-03 20:23:01
Making was solid and installation was possible in about 5 minutes.
Moped scooter side stand
On 2018-10-28 15:07:36
It was the first time, but it was easy to install and it was completed in about 5 minutes with one tool.
Scooter's side stand
On 2018-10-17 15:54:51
Because the stand was not attached to the child scooter again
I attached this.
Installation was also easy.
Just because the genuine stand is black
I hope this is black too.
Let's 4's side stand
On 2018-09-18 19:50:02
Installation was easy and it was good. I would like to use it for other car models if it was easy.
On 2018-07-22 21:28:12
I was also surprised with a set of polite instructions and a crowned saw tooth saw
It is good that it is definitely attached without caring any problems
It is recommended.
To Suzuki ZZ
On 2018-07-19 11:31:04
The picture and direction of the bracket in the manual of the manual and the position seen from the side of the bike are different, so I worried about where to put it. When examined on the net, it was found that there were two holes of the bracket at the position looked down from the bottom, and as shown in Fig. 1, the installation was completed.
Next, it was easy to install the spring installation work assumed to be difficult by utilizing a minus driver. I attach grease to the iron connection, I think that 17 inch bolt wants to see a little and then close it again. The product looks good, it is solid, and it was very satisfying to purchase at a cheaper price equivalent to 2,700 yen.