The reviews are automatic translation.
It was used for pressure measurement.
On 2018-10-23 15:24:06
I used a silicon tube with an inner diameter of 2 and an outer diameter of 4 MM. Although it can be used even with an outer diameter of 3 MM, it was a little tight.
On 2018-07-21 10:09:40
I used it for vacuum gauge attachment of fzr. Since the heat resistance of the attached packing is unknown, it is used in copper, but there is no problem at the moment.
On 2018-07-17 22:08:56
Valuable parts that can not be obtained in neighborhood home centers.
Of course, we also make solid.
It was good if shipping fee etc was cheaper.
For maintenance of Shimano SG-S700 series
On 2018-05-30 19:28:12
Although it is TL-S703 kit which exceeds 5000 yen if it is genuine
It becomes equivalent to this with silicone tube, syringe and appropriate container
Monotaro san can be aligned at about 1/10 of the price.
On 2018-04-19 15:54:46
I was looking for this but it was in Monotaro
I will do my best.
For muffler drain
On 2017-11-07 14:57:48
The product is a thing without mistake
For product images, for images, be sure to check the size and purchase.
I used it for the muffler drain piping of the monkey!
On 2017-10-26 12:31:22
I wanted a nipple for the inner diameter 4 mm hose in M5, but I bought it by accidentally misunderstanding the nipple for the hose with different inner diameter because parts photos were common
Please put the picture of the product, not the image.
For motorcycle muffler drain
On 2017-05-21 17:32:01
Purchase for the drain of remaining burned oil that accumulates at the bottom of the muffler silencer of 2 cycle motorcycle. Product precision was good enough for price.
Used for model airplanes
On 2017-04-30 00:39:11
Used as fuel outlet of fuel tank. I can use it without problems.
As an engine side attachment for synchronizing and adjusting the carburetor of a motorcycle
On 2017-04-06 12:21:25
It was used as a substitute for the engine side attachment at the time of tuning adjustment of the carburetor of the motorcycle. It was very cheap and saved. I am satisfied that the synchronization work was completed without problem.