The O ring of the float valve will be replaced by assy for every float valve, so I will make one 4000 yen, but this O ring seems to be a substitute. For now it is no fault. If it is 4 cylinders, it costs only 80 yen, which cost 16,000 yen only for parts. I think that it is user friendly.
Purchased for 10 mL of clear pipette made by LMS that is also sold in monotaro.
Because it was an unseen size, we always have inventory and it can be purchased cheaply and it is saved.
Durability is bad compared to the thing which is attached originally, but since unit price is cheap, it uses without exception being replaced and using it.
Cigar socket for foreign cars is bigger in diameter and shallower in depth than those of Japanese cars, so it can not be connected well, but it can not be connected well, but with this O ring attached to the male side, it plugs into the female , By pushing O ring with claws such as nails, a toothpick etc. with a thin tip, it became possible to take power supply stably even while running. When purchasing, I actually measure the diameters of the female side and the male side, pick about 2 kinds of O rings, I think that you can find what you are looking for when you wear it.
1A - S6 on the head side for repairing the bicycle portable pump head,
Although I bought it with my thought to install 1A - S4 on the valve side of the tube,
I was able to fix it by exchanging the head side O ring with 1A - S6.
Incidentally, install the 1A - S4 on the valve side without the O - ring on the head side
I did not keep airtight and failed when I put in an air test.
I'm planning to use it on my side as I'm worried about buying an American conversion adapter the next time.
In bicycle-related situations repair of what O-rings are used in various places
Even if parts are not supplied and also supplied, they are unexpectedly expensive and hesitate to purchase
There are many things to do, but it is interesting to experiment and obtain it cheaply here.
The O ring used for the bicycle portable pump head is well removed
Repeating the operation of pushing it into the inner groove with tweezers causes O ring
As it got gradually deteriorated and it seemed to be in a state that it was going to be replaced and as a spare item
I purchased 1A - S6.
I was able to confirm that the pump function after replacement works normally,
Because the wire diameter of 1A - S6O is somewhat thinner than the genuine one, the inside diameter after installation is large,
Surprisingly the resistance when removing it from the valve decreased and it did not fall off.
With the pump function recovered, there is no worry of falling off of the O ring at the destination
With concern solved at a stroke and it is safe to cycling with this
You can go out.