The reviews are automatic translation.
For water level
On 2018-08-16 19:26:20
Used for replacing the level indication in the water tank.
Originally a hose, it was hard to see, I exchanged it.
ABS is convenient because it is easy to process and has strength.
Since only the acrylic pipe is obtained in the neighborhood, it is saved because many sizes can be purchased easily.
On 2018-04-13 17:14:48
I cut the length as saw length of the board saw and used it. Even if it is a lapel bag, it is very nice feeling that it will not hurt the bag with a saw blade. The size was perfect and it was good.
Prototyping of beauty equipment
On 2018-03-20 16:37:03
Used for prototyping of beauty equipment.
It was saved by the manufacturer's prototype request because it was easy to format and process.
Material of work
On 2017-12-08 15:29:24
It was convenient to use conveniently. It is cheap and is the best.
I wanted a transparent plastic pipe and it was able to be applied.
On 2017-05-29 15:13:44
The price was cheap, and we were able to do work as expected.
On 2016-09-30 19:33:15
Thank you for your prompt response. It was affordable as well.
Used for underwater robots
On 2016-09-30 08:20:56
When passing the cable through the cable gland, in order to secure the strength when tightened up, once the cable is passed through the ABS pipe and hardened with epoxy bond, tightening this ABS pipe with the ground will not cause water leakage.
Fishing rod parts
On 2016-09-19 17:07:24
Since a pipe case is not attached unlike Ayu Rod, # 1 / # 2 parts of the mountain stream mainstream pole is thin, long and easy to break, so purchase. I am glad that this length is incomplete.
On 2016-09-12 12:57:40
Inner diameter 8 Outside diameter 10 Can be used for repairing door locker pins such as golf 2
Mechanical auxiliary equipment
On 2016-08-05 04:01:06
I purchased a product with an outer diameter of φ8. If I tried to insert it in a hole-drilled place with 8 mm bit size did not match at all ... I thought it was strange and I measured the size and it was 8.2 mm. There is no reason for drill bits of 8.2 mm, so you have to throw them away. I think that it is not an acceptable tolerance at all.