The reviews are automatic translation.
Repair of motor generator
On 2018-08-05 18:29:50
In the Suzuki SX 600 R generator, since only the lid of the air cleaner box was missing, attach one spacer bolt of M 6 × 15 mm to the part of the stud bolt fixing the carburetor and extend the stud, and the groove on the outer periphery of the box is Φ 4 By crushing and inserting the soft silicone tube of the lunch box, after covering the packing like the lid of the lunch box, cover the plywood and fix it with one long bolt and two thumbscrews, so that the new lid and the restoration of the equipment I was able to finish successfully.
Suzuki's 2 cycle generator often sees SX 650 R, SX 800 R, etc. in a state where only the lid of the air cleaner is missing. As a first aid there is a method such as tightening the empty can to the stud of the carburetor and plunging the sponge, but since the air clean box itself has a shape like the air intake chamber, the SX type generator is like this I think that it is desirable to repair with a method of covering the lid with a spacer bolt newly.
Extension of special shaft
On 2018-02-16 00:26:24
It was very helpful since it is a product that I can not find easily. I will repeat.
On 2018-01-19 14:55:10
There are variations in length, so you can choose a good length just.
As exterior parts of automobiles
On 2018-01-05 08:44:59
It is made of stainless steel and seems to be durable. It was almost as image street.
Production of test equipment
On 2017-05-02 17:56:52
Combined with auxiliary kanag LK HK (Kameidadenki), we were able to produce the test equipment we wanted. There are various sizes, it is saved.
Relocation of motorcycle equipment
On 2017-03-06 07:50:49
Although the finish of the product is good, it is regrettable that the male screw is a bit longer than the entry size of the female screw.
Grip fixing of bike handle and table creation
On 2015-05-12 01:58:35
I bought a high thing but I bought L2 as short as 14 mm, it was not useful, 25 mm I searched but there is not anything cheap, I can not find it elsewhere.
Changing takeout position of interfering lever
On 2015-01-11 13:41:54
I screwed only the tip of a long M3 screw so far and fixed it with a nut, and fixed the lever with a double nut in the middle of the exposed screw, but when it changed to this spacer it became easy to install It was. Accuracy of screw thread was good, the perpendicularity of screw and long bolt part was satisfactory, and lever position could be changed neatly.