The reviews are automatic translation.
Because the pattern is close to elliptical shape ...
On 2018-09-13 22:09:00
Because the shape is close to elliptical shape, it is easy to put force in. Tightening before final tightening is faster than L type wrench.
For maintenance of jigs for substrate inspection
On 2018-04-19 16:02:37
It is used for maintenance of flying probe. It is very compact, it is a part made in Germany, but it is not inch screws but very helpful. In fact Germany is also milli screw
Product assembling work
On 2017-06-02 15:33:35
Unlike cylindrical type grips, because of the delta type shape, there is grip power and work can be reliably progressed. A slight difficulty is the lack of strength at the root part of the handle or frequent damage. However, the above merits are adopted largely.
Assembling the model
On 2017-03-30 11:41:58
The part of the cane is a little long so it is not very effective for the magnet that is a bit hard to use
On 2017-03-13 20:45:15
Easy to use. It is a high expectation, but there is a slight uneasiness in the torsional strength.
Pinion gear exchange etc. of the radio control
On 2016-12-09 22:10:15
It was used for removing and retightening the stopper of the pinion gear and the suspension arm. There is no strength, it can be twisted immediately, and it will idle. Hakkiri is insufficient in strength. We do not recommend when strength and accuracy are required.
Radio control engine
On 2016-09-15 23:34:14
I used to tighten the cap screw and pulled out of the possession while pulling out. There is no strength and the screwdriver twists. I bought four other size differences, but something similar. It is not very useful.
Repair of electronic equipment
On 2016-08-26 07:30:16
Until now, I used a key type wrench, but it was not easy to rotate in fine work, but it was easier to turn with this driver type, and work efficiency improved.
Repair of electronic equipment using special screw
On 2016-07-25 07:22:34
Until now I used a wrench type, the first time I use a driver type. It is easy to open and close, especially when there are many numbers is easy.
During machine maintenance
On 2016-06-22 15:49:58
We ordered additionally, very easy to use.