The reviews are automatic translation.
On 2019-01-04 17:32:52
Purchase with replenishment for the amount used at home. Because it is for home use, it is enough without coating.
Assembling jigs and parts
On 2019-01-04 10:29:49
The tap is easy to cut, but the strength of the tap part is somewhat dissatisfied.
Fixture manufacturing, machine maintenance.
On 2018-12-21 16:32:17
In production, it is satisfactory enough, it is even better if the strength increases.
Production of prototype in development
On 2018-12-20 17:10:05
It was good to purchase good usability and excellent cost performance
For stopping to create female thread
On 2018-12-04 14:59:07
About 20 mm tap part · · · There is a slight break feeling
Agricultural equipment maintenance
On 2018-12-01 19:22:41
It is comfortable not to scrape residue. It is even better if it is about 10 mm longer.
To my do-it-yourself
On 2018-11-07 17:46:37
Tap, dice and home center are also quite expensive, so I hesitated, but this price will reach you. I think that the quality is good, aluminum has easily expired.
Used for screw adjustment of M3 nut
On 2018-10-31 17:18:26
Although it was used to correct the screw of the M3 nut, it is doubtful that the pitch is really 0.5, I will not enter the existing M3 nut at all, if I screw it by force, the nut will be considerably scraped and the screw will loosen and will not come off Lucky, is not the standard of pitch quite sweet? Although the M3 tap of the hexagonal axis of the same monotaro out of print was very good, it is totally different thing, please check the accuracy (inspection) once!
I can not recommend it at all! !
Used to make parts when customizing bikes and cars
On 2018-10-18 22:51:54
With straight taps up to now, if you do not repeat cutting and returning, the chips will chew and the screw will not cut cleanly, but the spiral tap is easy for screws to come out from the groove of the spiral! !
Machining screw holes
On 2018-09-25 17:10:23
It is for replenishment of standard standard consumables. For wear, replace regularly.