The reviews are automatic translation.
Used for work
On 2019-05-17 22:10:58
Since the price was low and the scale was easy to read, and the previously purchased vernier caliper had a step on the scale, it caused a reading error and was cheap.
For dimension measurement
On 2019-05-12 22:23:23
I feel that the inscription of Monotarou is a bit useless, but I don't have any problems with the accuracy and the feeling of use, and I like it much cheaper than famous maker products.
As we did not have calipers, we bought
On 2019-04-26 03:13:36
As we can use for measurement anywhere, we use conveniently.
Useful for measuring screw diameter etc.
When working in the factory
On 2019-03-03 18:06:38
It is woodworking.
The processing accuracy is 0.0 mm.
It is usable without a problem, but the point is that the display of the scale is thin and the point is that it is a drawback.
Dimension measurement of parts of motorcycles and automobiles, material measurement of DIY
On 2019-01-20 23:05:34
A closer look at what arrived at me showed that there was a slight deviation between the zero scale and the vernier line.
As we became anxious, we borrowed a micrometer to a mechanical craftsman and compared measured values at 4 points of 25, 50, 75, 100 mm.
As a result, the measured value came out 0.02 mm larger at each point. (Vernier can only read to 0.05 mm, but it was judged by two eyes.)
In the opinion of the craftsman, it is also recommended that those who work precision work to buy JIS 1 grade products.
On the other hand, if you do not make severe measurements there, you will be able to withstand use sufficiently, and it may be easy to buy because the price is low.
Since my application is the latter, I use it without hesitation.
On 2019-01-02 10:13:52
It's cheap anyhow.
Cost performance is very good.
On 2018-11-22 09:41:29
It is sharp enough to think that if the edge part of the metal touches the finger it will cut the skin, but is it the way it is a product that requires precision? It is a level that you do not mind such as error.
Construction machinery, farm equipment repair
On 2018-10-30 14:44:18
It is user-friendly. Letter size. The amount of slide is just right.
Measure on site
On 2018-10-11 17:12:34
I purchased it for company because it used to be broken.
Site talks · · ·. It seems easy to use. . .
On 2018-10-09 07:55:08
I was considering buying a vernier caliper which was a measuring tool from before
Finally I was able to purchase it.
There is no problem with standard use at all.
I will pay attention to the management side and I would like to use it forever for a long time.