This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
Contains activated rosin so no paste is required
Type: RA
Ingredient: Sn：60%、Pb：40%
Caution
Wire Diameter Φ(mm)
Trusco Part No.
Mass (g)
Mass (kg)
- S$29.99
Shipping: Min. 2 days
Technical Specs:Wire Diameter Φ(mm) 0.6 Trusco Part No. 823-0736 Mass (g) 150 Mass (kg) 0.15
- S$79.99
Shipping: Min. 2 days
Technical Specs:Wire Diameter Φ(mm) 0.6 Trusco Part No. 823-0737 Mass (g) 500 Mass (kg) 0.5
- S$149.90
Shipping: Min. 5 days
Technical Specs:Wire Diameter Φ(mm) 0.6 Trusco Part No. - Mass (g) 1000 Mass (kg) 1
- S$29.99
Shipping: Min. 2 days
Technical Specs:Wire Diameter Φ(mm) 0.8 Trusco Part No. 823-0738 Mass (g) 150 Mass (kg) 0.15
- S$79.99
Shipping: Min. 5 days
Technical Specs:Wire Diameter Φ(mm) 0.8 Trusco Part No. 823-0739 Mass (g) 500 Mass (kg) 0.5
- S$159.90
Shipping: Min. 5 days
Technical Specs:Wire Diameter Φ(mm) 0.8 Trusco Part No. - Mass (g) 1000 Mass (kg) 1
- S$6.39
Shipping: Min. 2 days
Technical Specs:Wire Diameter Φ(mm) 1 Trusco Part No. 823-0740 Mass (g) 20 Mass (kg) 0.02
- S$29.99
Shipping: Min. 2 days
Technical Specs:Wire Diameter Φ(mm) 1 Trusco Part No. 823-0741 Mass (g) 150 Mass (kg) 0.15
- S$66.99
Shipping: Min. 2 days
Technical Specs:Wire Diameter Φ(mm) 1 Trusco Part No. 823-0742 Mass (g) 500 Mass (kg) 0.5
- S$139.90
Shipping: Min. 5 days
Technical Specs:Wire Diameter Φ(mm) 1 Trusco Part No. - Mass (g) 1000 Mass (kg) 1
Customer Who Viewed This Product Also Viewed
Customer Reviews
- Manufacture and repair of electronic devicesSince it is of good quality, it can be used with confidence not only for consumer products but also for manufacturing and repairing industrial equipment.
(Translated by machine.)This is a review for Item # : 05239683.Posted on
- I used it to put a rotary volume on the board.The gap between my legs is just under 1mm, but I was able to do this. The way it melts and hardens is just right.
(Translated by machine.)This is a review for Item # : 05239604.Posted on
- For light load electrical controlThere is little scattering of internal flux and the printed circuit board does not get dirty.
(Translated by machine.)This is a review for Item # : 05239647.Posted on
- Soldering the connectorIt depends on the purpose of use, but it is easy to use, not too thick and not too thin. It can be solved immediately and does not become a mess. It goes well with the iron.
(Translated by machine.)This is a review for Item # : 05239613.Posted on
- When soldering wires, connectors, and terminalsBecause it is thin and blends well, you can work smoothly. I don't mind the smell.
(Translated by machine.)This is a review for Item # : 05239604.Posted on
- jigIt was thicker than I expected, but it can be used. Good one
(Translated by machine.)This is a review for Item # : 05239604.Posted on
- Toy repairWork that uses solder occurs about once a year. It was cheap and saved in a small amount. I'm an amateur, so I don't know if the solder is good or bad, but I could use it without any problems.
(Translated by machine.)This is a review for Item # : 05239604.Posted on
- For electrical component installation work, etc.It is used for wiring installation of each electrical equipment. It will be beautifully finished with careful work.
(Translated by machine.)This is a review for Item # : 05239604.Posted on
- For solderingSince it is used at home, a small amount will help. I haven't used it yet, but if it's easy to use, it's a repeat.
(Translated by machine.)This is a review for Item # : 05239604.Posted on
- When solderingIt is easier to clean afterwards because the flux in the center is less scattered than other companies.
(Translated by machine.)This is a review for Item # : 05239647.Posted on
Write Your Own Review