This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
An idling type that can be used in a wide range from mass production to maintenance and has no overtorque.
Preset type with lock mechanism, with scale * For products with calibration documents and traceability system diagrams, we can only accept orders on the web.
* Bits are sold separately.
* Products with proofreading cannot be canceled after ordering.
* Products that include (with traceability system diagram) in the product number will be shipped with the manufacturer's traceability system diagram attached.
* Products that include (with a set of calibration certificate implemented by the calibration company) in the product number will be inspected and calibrated by an external calibration company before shipment, and will be shipped after the documents are issued.
* The manufacturer's calibration certificate based on the inspection data at the time of manufacture is attached to the product as standard.
Preset type with lock mechanism, with scale * For products with calibration documents and traceability system diagrams, we can only accept orders on the web.
* Bits are sold separately.
* Products with proofreading cannot be canceled after ordering.
* Products that include (with traceability system diagram) in the product number will be shipped with the manufacturer's traceability system diagram attached.
* Products that include (with a set of calibration certificate implemented by the calibration company) in the product number will be inspected and calibrated by an external calibration company before shipment, and will be shipped after the documents are issued.
* The manufacturer's calibration certificate based on the inspection data at the time of manufacture is attached to the product as standard.
Specification: Bit sold separately.
Other: Bit sold separately.
Type: Preset type
Accuracy (%): ±3
Main Application: General tightening work
RoHS directive (corresponding to 10 substances): Correspondence
Load Direction: Right
Caution
Included Accessories
Trusco Part No.
Overall Length (mm)
Mass (g)
Reference / Former Model
Minimum Scale (cNm)
Torque Adjustment Range (cNm)
- S$219.90
Shipping: Min. 2 days
Technical Specs:Included Accessories Resin handle Trusco Part No. 157-9657 Overall Length (mm) 130 Mass (g) About 160 Reference / Former Model 12RTD Minimum Scale (cNm) 1 Torque Adjustment Range (cNm) 20～120
- S$219.90
Shipping: Min. 2 days
Technical Specs:Included Accessories - Trusco Part No. 157-9622 Overall Length (mm) 100 Mass (g) About 50 Reference / Former Model 1.5RTD Minimum Scale (cNm) 0.1 Torque Adjustment Range (cNm) 2～15
- S$259.90
Shipping: Min. 2 days
Technical Specs:Included Accessories Resin handle, preset hook spanner Trusco Part No. 157-9665 Overall Length (mm) 150 Mass (g) About 270 Reference / Former Model 26RTD Minimum Scale (cNm) 2 Torque Adjustment Range (cNm) 60～260
- S$219.90
Shipping: Min. 2 days
Technical Specs:Included Accessories - Trusco Part No. 157-9631 Overall Length (mm) 100 Mass (g) About 50 Reference / Former Model 3RTD Minimum Scale (cNm) 0.2 Torque Adjustment Range (cNm) 4～30
- S$289.90
Shipping: Min. 2 days
Technical Specs:Included Accessories Preset hook spanner Trusco Part No. 157-9673 Overall Length (mm) 155 Mass (g) About 320 Reference / Former Model 50RTD Minimum Scale (cNm) 2.5 Torque Adjustment Range (cNm) 100～500
- S$219.90
Shipping: Min. 2 days
Technical Specs:Included Accessories - Trusco Part No. 157-9649 Overall Length (mm) 110 Mass (g) About 80 Reference / Former Model 6RTD Minimum Scale (cNm) 0.5 Torque Adjustment Range (cNm) 10～60
Page
Cost Saving Products
Customer Who Viewed This Product Also Viewed
Customer Reviews
- tension adjustmentThis time, I was looking for it for adjusting the tension of the rotating handle. I thought it would be difficult to find something like this because it is not for normal screw tightening but because it is an ultra-low pressure torque, but I was able to purchase it easily at Monotaro and was saved. I would like to thank Tohnichi for having such a lineup. Thank you for your prompt response. thank you very much.
(Translated by machine.)This is a review for Item # : 02011441.Posted on
- vehicle maintenancePlease note that short type bits are not supported.
(Translated by machine.)This is a review for Item # : 02011475.Posted on
- Machine maintenanceI haven't used it yet, but I borrowed it and bought a new one. As for usability, I think there is no problem.
(Translated by machine.)This is a review for Item # : 02011475.Posted on
- Nut tightening work that requires precisionI have just started using it, but it is highly accurate and easy to use. I didn't know how to lock it, but when I put it firmly on the line, it locked. * I'm considering buying another one for work that can't be locked unless it fits the line.
(Translated by machine.)This is a review for Item # : 02011475.Posted on
- Hose band tighteningI've always wanted it because I sometimes overtightened the hose band and damaged the hose. When the set torque is reached, it spins, so I think it is good that there is no overtorque.
(Translated by machine.)This is a review for Item # : 02011475.Posted on
- Used for destructive inspection of constant torque tightening of resin molded productsWhen the torque is set to 1.5 Nm or more, the original lock function is no longer available. After that, I made an inquiry about nonconformity and picked it up quickly, but I felt that the response after that was a little slow.
(Translated by machine.)This is a review for Item # : 02011457.Posted on
- Tightening the busbar in the distribution boardIt is good to have a plastic cover on the handle. (A plastic cover is attached as standard to the RTD260CN purchased at the same time.)
(Translated by machine.)This is a review for Item # : 02011475.Posted on
- Tightening the disk for HDD to the spindleI think the memory for torque setting is a little hard to see.
(Translated by machine.)This is a review for Item # : 02011466.Posted on
- Hexagon screw tighteningThere is no problem with the main body I wanted more explanation about applicable bits.
(Translated by machine.)This is a review for Item # : 02011484.Posted on
Write Your Own Review