If you put two metal plates on the front, close the top cover and then lock it, you will not be able to pull out the drawer, which will prevent theft. It can be opened and closed smoothly with the bearing rail.
* When closing the drawer, please close it properly until the end. * The attached handle is a product that the customer has to install. *As this is an imported product, there may be slight peeling of the paint or minor scratches or dents. *Color may change.
This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
Purchased because it was the cheapest compared to some tool chests with equivalent functions. It is troublesome that the drawer lock requires opening the top plate and inserting the iron plate. It would be nice if the lock was unlocked when the top cover was opened, just like other manufacturers' hints. However, considering the price, I can't say that. There was no "MonotaRO" logo on the upper left of the front, right? The left and right handles are fixed with tapping screws, but I haven't tested yet whether this handle can withstand a full load of tools. I haven't bought it yet, so I don't know what will happen in the future, but so far I'm satisfied. (Translated by machine.)
Loaded in a light van and used for on-site repairs and circuits
I was looking for a light weight of the tool box itself. The weight of the main body of 11 kg is light and it is helpful because it can be lifted and mounted by one person even if it is packed with tools. There are some inconveniences such as the drawer will come out if you do not slide the iron plate to the entire surface when you carry it, but the reason why this lightweight is the most selected is that the drawer is not all in front or you have to insert the iron plate at the time of locking No good (Translated by machine.)
Since the Monotaro tool set of 31085048 is small, I tried to change it to the same Monotaro's large chest, but unfortunately the second and third drawers were shallow and could not fit in the tray, but if it is 32 mm, other wrench holders will not work. , Spanner and glasses are now solid. If it is 40 mm, it can be used as a wrench holder or tray. Size needs to be confirmed first (Translated by machine.)
The product received is in good condition and is quite spacious for the cost incurred. The only downside of this toolbox is the inability to lock the drawers, which can be done only using two metal stoppers.
I hesitated a little when I saw the following negative evaluation, but it was surprisingly good when I purchased it, so I will review it.・ There are dents and scratches on the main body → I was prepared for it a little, but my own is not abnormal at all ・ The iron plate is thin and cheap → I think it is like this (I do not think it is particularly thin) ・ The drawer is hard and one hand I can't open it with → Personally, I prefer to have this level of moderation ・ The drawer opens without permission during transportation → I think it's the size that should be used stationary, but the only thing I was interested in was The hole on the lid side where the key lever is hooked is slightly misaligned, so the key cannot be locked unless the iron plate on the keyway side is pressed. However, in my case, I don't usually lock it, so there is no problem. (Translated by machine.)