All Category

Turning insert TNGG-C

Rating:
86%
from S$69.99
Min. 2 days
(Material)
General-purpose grades for steel, stainless steel, and cast iron Grades that have both wear resistance and toughness * Be sure to wear protective equipment when using as there is a risk of injury.
* Do not use for any purpose other than its intended purpose.
Clearance Angle (°):  0
Corner Radius rc (mm):  0.4
Corner Radius (mm):  0.4
Blade Length l (mm):  16.5
Cutting Blade Length (mm):  16.5
Hole Diameter d1(mm):  3.81
Thickness (mm):  4.76
Thickness s (mm):  4.76
Inscribed Circle Diameter (Φmm):  9.525
Chip Breaker:  Both sides
Socket Shape:  Cylindrical hole
Shape:  Equilateral triangle 60 °
Material:  MNP30 (cermet)
Type:  Negative
Abrasive Materials:  P (steel) / K (cast iron)
Cutting Area:  Precision finish
Right or Left Hand:  Right
with or without Hole:  Yes
Tolerance of Inscribed Circle (mm):  ±0.025
Corner Height Tolerance (mm):  ±0.025
Thickness Tolerance (mm):  ±0.13
Caution
This product is manufactured in Japanese standards.
Some products may not meet the standards of your item.
Please check the specification carefully before you order.
Item #
Mfr #
TNGG160404R-C
Package Qty
Shipping
Price
Qty
 
 
 
1box(10pc)
Min. 2 days
S$69.99
- +
Page
  • Item #: 44352901

    Mfr #: TNGG160404R-C

    Package Qty: 1box(10pc)

    S$69.99

    Shipping: Min. 2 days

    Technical Specs:

    - +
Page

Customer Reviews

Items 1 - 10 of 18

Show per page
  1. Lathe work
    Rating
    100%
    I was skeptical because it was reasonably priced, but I can use it in good condition without any problems. There is no problem with durability.
    (Translated by machine.)

    Review by

    Posted on

  2. During cutting
    Rating
    100%
    I think it is cheap and has high cost performance. I plan to purchase it next time
    (Translated by machine.)

    Review by

    Posted on

  3. Turning (resin, light metal)
    Rating
    100%
    I bought it as a step up from the cheap tip I bought on a certain mail order site. Compared to cheap products, it cuts very well, so processing efficiency has improved. If the conditions are met, the surface will be beautiful. I think it's safe because the chips curl well. I am very happy that one chip can be used 6 times.
    (Translated by machine.)

    Review by

    Posted on

  4. Lathe work
    Rating
    80%
    The cost performance was the best, thank you. I will buy it again.
    (Translated by machine.)

    Review by

    Posted on

  5. Bearing making for machinery and equipment Used when making repair parts
    Rating
    100%
    I was very satisfied with the sharpness and precision of the bearings. I would like to order this tip again next time.
    (Translated by machine.)

    Review by

    Posted on

  6. lathe
    Rating
    100%
    Is it an ordinary cutting tip? I don't know the durability because I haven't used it so much yet, but I don't think there is any problem with cutting.
    (Translated by machine.)

    Review by

    Posted on

  7. Lathe processing Mainly external processing
    Rating
    100%
    As for finishing, processing seems to have good surface accuracy, so I would like to purchase it again next time.
    (Translated by machine.)

    Review by

    Posted on

  8. lathe manufacturing
    Rating
    100%
    It is cheap and of good quality, and I buy it as a repeat product every time.
    (Translated by machine.)

    Review by

    Posted on

  9. Carving out a round bar
    Rating
    20%
    This product is not recommended. Compared to made in Japan, it is easily chipped and cannot be used. It did not change even if the cutting width was reduced.
    (Translated by machine.)

    Review by

    Posted on

  10. Motorcycle remodeling repair
    Rating
    100%
    I mainly use it for aluminum processing, but it is cheap and I am satisfied with the finish.
    (Translated by machine.)

    Review by

    Posted on

Items 1 - 10 of 18

Show per page
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account